[2024年06月]更新のCisco 350-801問題集とリアルな試験問題 [Q209-Q234]

[2024年06月]更新のCisco 350-801問題集とリアルな試験問題

2024年最新の350-801のPDF最近更新された問題

Cisco 350-801試験は、Cisco Collaboration Core Technologiesを実装および運用したい個人の知識とスキルをテストするために設計された認定試験です。この試験は、Cisco Unified Communications Manager（CUCM）、Cisco Unified Communications Manager Express（CUCME）、Cisco Unity Connection、Cisco Unified IMおよびPresence、Cisco Expresswayなど、Cisco Collaboration Solutionsの実装と運用の経験がある専門家を対象としています。この試験に合格することは、シスコ認定スペシャリスト - コラボレーションコア認定の要件です。

Cisco 350-801認定試験は、Cisco Collaboration Technologiesと協力するIT専門家にとって重要な資格です。この試験に合格することにより、候補者は専門知識を示し、雇用主に価値を高めることができます。適切な準備と献身により、候補者は試験に合格し、認定目標を達成することができます。

質問 # 209
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls.
Which configuration is needed to accomplish this task?

正解：A

解説：
The first rule will match 9911 and send it as 911. If that rule is not matched, rule 2 will match
"9anything" and send it without the leading 9.

質問 # 210
An engineer wants to manually deploy a CISCO Webex DX80 Video endpoint to a remote user. Which type of provisioning is configured on the endpoint?

A. Cisco Unity Connection
B. Edge
C. Cisco Meeting Server
D. Cisco Unified Border Element

正解：B

解説：
The Cisco Webex DX80 Video endpoint can be provisioned in two ways:
Automatically, using the Cisco Unified Communications Manager (CUCM) or Cisco Video Communication Server (VCS) Manually, using the Edge provisioning mode The Edge provisioning mode is used when the endpoint is not connected to the CUCM or VCS. In this mode, the endpoint is configured with the necessary settings, such as the IP address, SIP/H.323 parameters, and time and date.
The Cisco Unified Border Element (Cisco UBE) is a network element that provides security and call control for IP telephony networks. The Cisco Unity Connection is a unified messaging system that provides voicemail, email, and fax services. The Cisco Meeting Server is a video conferencing system that provides high-quality video and audio conferencing.

質問 # 211
An engineer must configure a SIP route pattern using domain routing with destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3. How must the IPV4 Pattern be configured?

A. \[email protected]
B. 192.168.1.3
C. ciscocm1.jupiter.com
D. [email protected]

正解：C

質問 # 212
An engineer is configuring a BOT device for a Jabber user is Cisco Unified Communication Manager.
Which phone type must be selected?

A. Cisco Unified Client services Framework
B. third-party SIP device
C. Cisco Dual mode for Android
D. Cisco Dual Mode for iPhone

正解：C

解説：
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_D00D8CBD_00_d eployment-installation-guide-cisco-jabber115/CJAB_BK_D00D8CBD_00_deployment-installation- guide-cisco-jabber115_chapter_01000.html

質問 # 213
Which Cisco Unified Communications Manager service parameter should be enabled to disconnect a multiparty call when the call initiator hangs up?

A. Enterprise Feature Access code for conference
B. H.225 Block Setup destination
C. Block OffNet to OffNet Transfer
D. Drop Ad Hoc Conference

正解：D

解説：
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_ SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-
100_chapter_011000.html#CUCM_TK_DFC66444_00

質問 # 214
Which type of message must an administrator configure in the SIP Trunk Security Profile for a Message Waiting Indicator light to work with a SIP integration between Cisco UCM and Cisco Unity Connection?

A. 200 OK
B. SIP Register
C. Unsolicited NOTIFY
D. TCP port 5060

正解：C

解説：
https://community.cisco.com/t5/collaboration-voice-and-video/understanding-troubleshooting- mwi-on-unity-connection/ta-p/3162948

質問 # 215
An engineer must manually provision a Cisco IP Phone 8845 using SIP. Which two fields must be configured for a successful provision? (Choose two.)

A. Media resources group list
B. Location
C. CSS
D. Device security profile
E. SIP profile

正解：D、E

質問 # 216
Refer to the exhibit. An engineer is confining class of control for a user in Cisco UCM.
Which change will ensure that the user is unable to call 2143?

A. Set the users device CSS to <None>
B. Set the user's line CSS to <None>
C. Change line CSS to only contain Partition_B
D. Change line partition to Partition_A

正解：A

質問 # 217
Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?

A. Plug the phone into the network.
B. Ask the Cisco UCM administrator to associate the phone to an end user.
C. Dial the hunt pilot extension and associate the phone to an end user.
D. Dial the self-provisioning IVR extension and associate the phone to an end user.
E. Enter settings menu on the phone and press *,*,# (star, star, pound).

正解：A、D

解説：
Self-Provisioning Phones:
When the feature is configured,you can provision a phone by doing the following:
* Plug the phone into the network.
* Dial the self-provisioning IVR extension.
* Follow the prompts to configure the phone,and associate the phone to an end user. Depending on how you have configured self-provisioning,the end user may to enter the user password,PIN, or an administrative authentication code.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_ b_system-configuration-guide-1201/cucm_b_system-configuration-guide-
1201_chapter_01001000.pdf

質問 # 218
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls Which configuration is needed to accomplish this task?
A)

B)

C)

D)

A. Exhibit D
B. Exhibit B
C. Exhibit A
D. Exhibit C

正解：B

質問 # 219
A DTMF mismatch is occurring between an MGCP gateway registered FXS port and a Cisco Unified Communications Manager SIP trunk. Which media resource can be leveraged to interwork this mismatch?

A. Conference Bridge
B. Trusted Relay Point
C. Media Termination Point
D. Annunciator

正解：C

解説：
Section: Cisco IOS XE Gateway and Media Resources

質問 # 220
After an engineer runs the ntils ntp status command on the Cisco Unified Communications manager publisher, the stratum value is 16. Which issue can the cisco Unified CM cluster experience?

A. The cluster loses access to port 124 at the firewall.
B. The date/time group an all phones default to the time zone of the engineer.
C. Unified CM sends an NTPv4 packet.
D. Database replication is not synchronized on the Unified CM nodes.

正解：D

質問 # 221
Refer to the exhibit. Which Codec is negotiated?

A. G.711ulaw
B. G.729
C. iLBC
D. G.728

正解：A

質問 # 222
Which DiffServe PHB preserves backward compatibility with any IP precedence scheme?

A. default
B. class selector
C. expedited forwarding
D. assured forwarding

正解：B

質問 # 223
A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority. Which 10$ entry sets the required priority?

A. dtmf-relay rtp-nte sip-notify
B. sip-notify dtmf-relay rtp-nte
C. dtmf-relay sip-kpml cisco-rtp
D. dtmf-relay cisco-rtp

正解：A

質問 # 224
What dialled numbers match this Cisco UCM route pattern?
1[23]XX

A. 1200 through 1399 only
B. 1230 through 1239 only
C. 12300 through 12399 only
D. 1200 through 1300 on1ly

正解：D

質問 # 225
How are E.164 called-party numbers normalized on a globalized call-routing environment is Cisco Unified Communications Manger?

A. Normalization is not required
B. Normalization is achieved by stripping or translating the called numbers.
C. Call ingress must be normalized before the call being routed.
D. Normalization is achieved by setting up calling search and partitions at the SIP trunk for PSTN connection.

正解：B

質問 # 226
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.

正解：

解説：

質問 # 227

Refer to the exhibit. Given this "debug isdn q921" output, what is the problem with the PRI?

A. PRI does not have an IP address configured on the interface.
B. Layer 2 is down on the controller.
C. Layer 1 is down on the controller.
D. Nothing, the PRI is sending keepalives.

正解：B

質問 # 228
Refer to the exhibit.

You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?

A. The DNS record should be created for _ cisco-uds _tcp example.com.
B. The DNS record should be changed from _collab-edge_tcp example.com.
C. Server 4.2.2.2 is not a valid DNS server.
D. The DNS record type should be changed from SRV to A.

正解：B

質問 # 229
Endpoint A is attempting to call endpoint B.
Endpoint A only supports G.711 ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw.
Which two media are resources are allocated to normalize packetization rates through transrating?

A. Software MTP on Cisco IOS Software
B. Software transcoder on Cisco unified Communications manager
C. Software MTP on Cisco Unified Communication Manager
D. Hardware MTP on Cisco IOS Software
E. Hardware transcoder on Cisco IOS Software

正解：D、E

解説：
Software MTP - Software-only implementation that does not use a DSP resource for endpoints using the same codec and the same packetization time.
Hardware MTP - Hardware-only implementation that uses a DSP resource for endpoints using the same G.711 codec but a different packetization time. The repacketization requires a DSP resource so it cannot be done by software only. Cisco Unified Communications Manager also uses the term software MTP when referring to a hardware MTP.
https://www.cisco.com/c/en/us/td/docs/routers/access/vgd1t3/rel1_0/software/configuration/guide/VGD_transcoding.html

質問 # 230
Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)

A. Set Video bandwidth in the Region settings to 0.
B. Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
C. Add the audio forced command to voice service voip on the Unified Border Elements.
D. Change the Video Capabilities dropdown on the endpoint to Disabled.
E. Check the Retry Call as Audio on the SIP trunk

正解：A、E

解説：
The reason is it has to be only in CUCM per the question. You would create a specific Region relationship for the Device Pool applied to the trunk that cannot handle video and thus change the Maximum Video Bandwidth to 0 while setting retry a video call as audio on the Phone Configuration (default setting is this is already checked).

質問 # 231
Refer to the exhibit.

What is a possible cause of the PRI issue?

A. The clock source is incorrect.
B. The controller shut down.
C. The framing is configured incorrectly.
D. The cable is unplugged.

正解：C

質問 # 232
Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)

A. Set Video bandwidth in the Region settings to 0.
B. Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
C. Add the audio forced command to voice service voip on the Unified Border Elements.
D. Change the Video Capabilities dropdown on the endpoint to Disabled.
E. Check the Retry Call as Audio on the SIP trunk

正解：A、E

質問 # 233
Refer to the exhibit. Calls to Cisco Unity Connection are failing across Cisco Unified Border Element when callers try to select a menu prompt. Why is this happening and how is it fixed?

A. Cisco Unified Border Element is sending the incorrect media IP address. The IP address of the loopback interface must be advertised in the SDP.
B. Cisco Unified Border Element is not sending any support for DTMF. DTMF configuration must be added to the appropriate dial peer.
C. Cisco Unity Connection is configured on G.729 only. Cisco Unity Connection must be reconfigured to support iLBC.
D. The Cisco Unity Connection Call Handler is configured for a -Release to Switch" transfer type.
Transfers must be disabled for the Cisco Unity Connection Call Handler.

正解：B

質問 # 234
......

最新の350-801合格保証される試験問題集認証サンプル問題：https://jp.fast2test.com/350-801-premium-file.html

350-801試験合格保証最新390問題：https://drive.google.com/open?id=1DoDFWnEDOhaGD5Q-zZARg94VTYBCi34p