[2023年11月28日]JN0-335サンプルには正確で更新された問題
JN0-335試験情報と無料練習テスト
JN0-335試験に合格すると、候補者はJuniper Networks Certified Specialist Security（JNCIS-SEC）認定を取得します。この認定は、業界全体で認められ、候補者が様々なネットワーク環境でJuniper Networksセキュリティテクノロジーを設定、監視、トラブルシューティングするために必要な知識とスキルを持っていることを示します。JNCIS-SEC認定は、キャリアを進め、収益を増やしたいセキュリティ専門家にとって貴重な資格です。
JN0-335試験は、90分以内に完了する必要がある65問の複数選択問題から構成されています。この試験では、セキュリティゾーン、セキュリティポリシー、NAT、VPN、IPsec VPN、統合脅威管理（UTM）など、幅広いセキュリティコンセプトがカバーされます。また、SRXシリーズサービスゲートウェイ、Junos Space Security Director、Sky ATPなど、Juniper Networksのセキュリティ製品に関する知識も必要です。この試験に合格するには、最低限65％のスコアが必要であり、試験に合格すると3年間有効なJNCIS-SEC認定が授与されます。
質問 # 50
You have deployed an SRX300 Series device and determined that files have stopped being scanned.
In this scenario, what is a reason for this problem?
- A. The infected host communicated with a command-and-control server, but it did not download malware.
- B. The software license is a free model and only scans executable type files.
- C. The file is too small to have a virus.
- D. You have exceeded the maximum files submission for your SRX platform size.
正解：D
解説：
You have exceeded the maximum files submission for your SRX platform size: This statement is correct because file scanning on SRX300 Series device has a limit on the number of files that can be submitted per minute based on the platform size3. For example, SRX320 has a limit of 10 files per minute3.
質問 # 51
Which two devices would you use for DDoS protection with Policy Enforcer? (Choose two.)
- A. vQFX
- B. MX
- C. vMX
- D. QFX
正解：B、C
解説：
The MX and vMX devices can be used for DDoS protection with Policy Enforcer. Policy Enforcer is a Juniper Networks solution that provides real-time protection from DDoS attacks. It can be used to detect and block malicious traffic, and also provides granular control over user access and policy enforcement. The MX and vMX devices are well-suited for use with Policy Enforcer due to their high-performance hardware and advanced security features.
質問 # 52
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Hosts are unable to communicate through the SRX Series device after being placed on the infected host feed with a high enough threat score.
- B. Malicious HTTP file downloads are always blocked.
- C. Hosts are always able to communicate through the SRX Series device no matter the threat score assigned to them on the infected host feed.
- D. Malicious HTTP file downloads are never blocked.
正解：A
質問 # 53
Your company is using the Juniper ATP Cloud free model. The current inspection profile is set at 10 MB You are asked to configure ATP Cloud so that executable files up to 30 MB can be scanned while at the same time minimizing the change in scan time for other file types.
Which configuration should you use in this scenario?
- A. Use the ATP Cloud Ul to update a custom profile and increase the scan limit for executable files to 30 MB.
- B. Use the ATP Cloud Ul to change the default profile to increase the scan limit for all files to 30 MB.
- C. Use the CLI to change the default profile to increase the scan limit for all files to 30 MB.
- D. Use the CLI to create a custom profile and increase the scan limit.
正解：A
解説：
In this scenario, you should use the ATP Cloud Ul to create a custom profile and update the scan limit for executable files to 30 MB. This will ensure that executable files up to 30 MB can be scanned, while at the same time minimizing the change in scan time for other file types. To do this, log in to the ATP Cloud Ul and go to the Profiles tab. Click the Create button to create a new profile, and then adjust the scan limits for executable files to 30 MB. Once you have saved the custom profile, you can apply it to the desired systems and the new scan limit will be in effect.
質問 # 54
Exhibit
Referring to the SRX Series flow module diagram shown in the exhibit, where is application security processed?
- A. Services ALGs
- B. Forwarding Lookup
- C. Screens
- D. Security Policy
正解：A
質問 # 55
Click the Exhibit button.
The output shown in the exhibit is displayed in which format?
- A. WELF
- B. syslog
- C. sd-syslog
- D. binary
正解：B
質問 # 56
Which two statements apply to policy scheduling? (Choose two.)
- A. A policy stays active regardless of when the schedule is active.
- B. A policy refers to many schedules.
- C. A policy refers to one schedule.
- D. Multiple policies can refer to the same schedule.
正解：C、D
質問 # 57
In an Active/Active chassis cluster deployment, which chassis cluster component is responsible for RG0 traffic?
- A. the secondary node
- B. the primary node
- C. the master routing engine of the secondary node
- D. the backup routing engine of the primary node
正解：B
質問 # 58
Exhibit
Referring to the exhibit, what do you determine about the status of the cluster.
- A. Both nodes determine that they are in a primary state.
- B. Node 2 is down.
- C. There are no issues with the cluster.
- D. Node 1 is down
正解：B
質問 # 59
Click the Exhibit button.
You are configuring an SRX chassis cluster with the node-specific hostname and management address. Referring to the exhibit, which configuration completes this requirement?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
正解：C
質問 # 60
You must fine tune an IPS security policy to eliminate false positives. You want to create exemptions to the normal traffic examination for specific traffic.
Which two parameters are required to accomplish this task? (Choose two.)
- A. destination IP address
- B. destination port
- C. source IP address
- D. source port
正解：A、C
質問 # 61
Which two statements about SRX Series device chassis clusters are true? (Choose two.)
- A. Each chassis cluster member device can host active redundancy groups
- B. Redundancy group 0 is only active on the cluster backup node.
- C. Each chassis cluster member requires a unique cluster ID value.
- D. Chassis cluster member devices must be the same model.
正解：A、C
解説：
1. Each chassis cluster member requires a unique cluster ID value: This statement is true. Each chassis cluster member must have a unique cluster ID assigned, which is used to identify each device in the cluster.
2. Each chassis cluster member device can host active redundancy groups: This statement is true. Both devices in a chassis cluster can host active redundancy groups, allowing for load balancing and failover capabilities.
The two statements about SRX Series device chassis clusters that are true are that each chassis cluster member requires a unique cluster ID value, and that each chassis cluster member device can host active redundancy groups. A unique cluster ID value is necessary so that all members of the cluster can be identified, and each chassis cluster member device can host active redundancy groups to ensure that the cluster is able to maintain high availability and redundancy.
Additionally, it is not necessary for all chassis cluster member devices to be the same model, as long as all devices are running the same version of Junos software.
質問 # 62
Which two sources are used by Juniper Identity Management Service (JIMS) for collecting username and device IP addresses? (Choose two.)
- A. Microsoft Exchange Server event logs
- B. Active Directory domain controller event logs
- C. OpenLDAP service ports
- D. DNS
正解：B、D
解説：
Juniper Identity Management Service (JIMS) collects username and device IP addresses from both DNS and Active Directory domain controller event logs. DNS is used to resolve hostnames to IP addresses, while Active Directory domain controller event logs are used to get information about user accounts, such as when they last logged in.
質問 # 63
Which statement is true about JATP incidents?
- A. Incidents consist of all the events associated with a single threat.
- B. Incidents are sorted by category, followed by severity.
- C. Incidents are always automatically mitigated.
- D. Incidents have an associated threat number assigned to them.
正解：D
質問 # 64
What are two valid JIMS event log sources? (Choose two.)
- A. Microsoft Active Directory audit logs
- B. Microsoft Active Directory server event logs
- C. Microsoft Exchange Server event logs
- D. Microsoft Windows Server 2012 audit logs
正解：B、C
質問 # 65
Exhibit
Which two statements are correct about the configuration shown in the exhibit? (Choose two.)
- A. The others 300 parameter means unidentified traffic flows will be dropped in 300 milliseconds.
- B. The session-class parameter in only used when troubleshooting.
- C. Every session that enters the SRX Series device will generate an event
- D. Replacing the session-init parameter with session-lose will log unidentified flows.
正解：A、C
解説：
The configuration shown in the exhibit is for a Juniper SRX Series firewall. The session-init parameter is used to control how the firewall processes unknown traffic flows. With the session-init parameter set to 300, any traffic flows that the firewall does not recognize will be dropped after 300 milliseconds. Additionally, every session that enters the device, whether it is known or unknown, will generate an event, which can be used for logging and troubleshooting purposes. The session-lose parameter is used to control how the firewall handles established sessions that are terminated.
質問 # 66
You are troubleshooting advanced policy-based routing (APBR).
Which two actions should you perform in this scenario? (Choose two.)
- A. Inspect the application system cache for the application entry.
- B. Review the APBR statistics for matching rules and route modifications.
- C. Verify that the APBR profiles are applied to the egress zone.
- D. Verity inet.0 for correct route leaking.
正解：A、B
質問 # 67
At which step in the packet flow are Junos Screen checks applied?
- A. after source NAT services are applied
- B. prior to the route lookup
- C. prior to security policy processing
- D. after ALG services are applied
正解：B
質問 # 68
Which two statements describe IPS? (Choose two.)
- A. IPS can be used to prevent future attacks from occurring.
- B. IPS dynamically sends policy changes to SRX Series devices.
- C. IPS inspects up to Layer 4 in the OSI model.
- D. IPS inspects up to Layer 7 in the OSI model.
正解：A、D
質問 # 69
What is the correct step sequence used when Sky ATP analyzes a file?
- A. static analysis -> cache lookup -> antivirus scanning -> dynamic analysis
- B. cache lookup -> static analysis -> antivirus scanning -> dynamic analysis
- C. cache lookup -> antivirus scanning -> static analysis -> dynamic analysis
- D. dynamic analysis -> static analysis -> antivirus scanning -> cache lookup
正解：C
質問 # 70
......
Juniper JN0-335認定試験は、IT業界で非常に尊敬されている認定です。この認定は、ネットワークセキュリティ分野の専門家のスキルと知識を検証するように設計されています。この試験は、Junosセキュリティプラットフォームでの専門知識を強化したい個人と、セキュリティポリシーを構成および管理し、ネットワークの脆弱性を特定する能力を目的としています。
合格させるJuniper JN0-335プレミアムお試しセットテストエンジンPDFで無料問題集セット：https://jp.fast2test.com/JN0-335-premium-file.html
2023年最新の実際に出るJN0-335問題集テストエンジン試験問題はここにある：https://drive.google.com/open?id=1F8pfD9d0vOqeSHhH3yDGHe8V9gz_hs10