[2023年07月]更新のDEA-5TT2問題集PDFでDEA-5TT2リアル試験問題解答
DEA-5TT2問題集で100%合格保証と最新のお試しサンプル
EMC DEA-5TT2（アソシエイト-ネットワーキング）認定試験は、ネットワーキングの専門知識を証明したい個人を対象としたプロの認定資格です。ネットワーク管理者、ネットワークエンジニア、その他のIT専門家が、ネットワーキング分野でのキャリアアップを目指すために最適な認定試験です。この認定資格により、個人はネットワーキングのコンセプト、ネットワークプロトコル、ネットワーク設計、ネットワークセキュリティの知識とスキルを証明することができます。
質問 # 18
A Dell EMC Networking N-Series switch is configured on a port channel with LACP using the interfaces Te1/0/1 and Te1/0/2. How is the egress traffic distributed among the interfaces?
- A. Load balanced per packet using round robin
- B. Load balanced using a hash function
- C. Traffic overflow will be sent to the second interface
- D. Interfaces will be used in active/passive
正解：B
質問 # 19
On which Dell EMC Networking switches can Multi-Chassis Link Aggregation (MLAG) be configured?
- A. Z-Series
- B. C9000 Series
- C. S-Series
- D. N-Series
正解：D
質問 # 20
Which topology is considered a best practice when stacking switches?
- A. Ring
- B. Cascade
- C. Daisy-chain
- D. Serial
正解：A
質問 # 21
In IPv4, what is the proper conversion from binary to decimal for the number 11010010?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 22
Which IP address is in the Class B range?
- A. 126.16.20.48
- B. 100.100.90.87
- C. 192.15.48.130
- D. 191.56.44.200
正解：D
質問 # 23
A network administrator has a stack of four Dell EMC Networking S4800 Series switches. Each stack unit is configured with a different priority. Which switch will be elected as the management device?
- A. Switch with priority 21
- B. Switch with priority 0
- C. Switch with priority 14
- D. Switch with priority 1
正解：D
質問 # 24
In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?
- A. Learning
- B. Listening
- C. Forwarding
- D. Blocking
正解：A
質問 # 25
What is the default OSPF "hello interval"?
- A. 30 seconds
- B. 5 seconds
- C. 10 seconds
- D. 15 seconds
正解：C
質問 # 26
What are Network Address Translation (NAT) inside global addresses?
- A. Private IP addresses used by the local network
- B. Pubic addresses used by other networks outside of the local network
- C. Public IP addresses used by the local network to communicate with the Internet
- D. Addresses used by NAT router when sending frames to devices on the local network
正解：C
質問 # 27
Which BASE-T Ethernet standard specifies a CAT6 cable type?
- A. 5GBASE-T
- B. 10GBASE-T
- C. 10BASE-T
- D. 2.5GBASE-T
正解：B
質問 # 28
What accurately describes OSPF?
- A. Interior gateway path-vector protocol
- B. Interior gateway distance-vector protocol
- C. Exterior gateway distance-vector protocol
- D. Interior gateway link-state protocol
正解：D
質問 # 29
Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?
- A. Repeater
- B. NIC
- C. Router
- D. Switch
正解：A
質問 # 30
How is a switch different from a hub?
- A. A switch tracks MAC addresses of all connected devices.
- B. A switch decreases the number of broadcast storms.
- C. A switch does not include any latency into the frame transfer time.
- D. A switch operates at a lower, more efficient layer of the OSI model.
正解：A
質問 # 31
What is the Organizationally Unique Identifier (OUI) in the MAC address 00:C4:4F:23:AF:4A?
- A. 4F:23:AF:4A
- B. 23:AF:4A
- C. 00:C4:4F:23
- D. 00:C4:4F
正解：D
質問 # 32
Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?
- A. Inside source static
- B. Outside source static
- C. Overload
- D. PAT
正解：A
質問 # 33
Which route type is added to the routing table by a routing protocol?
- A. Default route
- B. Dynamic
- C. Static
- D. Directly connected
正解：B
質問 # 34
The IEEE separates the Data Link and Physical ISO layers into four sub-layers. Based on the exhibit, what is the correct order of these sub-layers; from lowest to highest?
正解：
解説：
質問 # 35
Which IPv6 scope is used for private addressing on a local network?
- A. Global
- B. APIPA
- C. Unique local
- D. Area wide
正解：C
質問 # 36
Which formula is used for calculating OSPF interface costs?
- A. Reference bandwidth + interface bandwidth
- B. Reference bandwidth / interface bandwidth
- C. Interface bandwidth / reference bandwidth
- D. Reference bandwidth - interface bandwidth
正解：C
質問 # 37
Which criteria is used to define an extended MAC ACL filter?
- A. Destination TCP port number and source MAC address
- B. Destination MAC address and Ethernet frame type
- C. Source and destination MAC addresses
- D. Ethernet frame type and frame size
正解：C
質問 # 38
On Switch A, a static route has been redistributed into OSPF. Which type of OSPF router will this process make Switch A?
- A. Area Border Router (ABR)
- B. Backbone Router (BR)
- C. Autonomous System Boundary Router (ASBR)
- D. Designated router (DR)
正解：C
質問 # 39
Which Ethernet frame forwarding method works best when the outbound ports run at the same speed as the inbound port?
- A. Cut-through
- B. Fragment-free
- C. Store-and-forward
- D. Unicast
正解：A
質問 # 40
What accurately describes the comparison between stacking and VLT?
- A. Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/ series is the same.
- B. VLT allows for more physical devices to appear as one virtual device than stacking does.
- C. Stacked switches share a common control plane while VLT peers maintain their own control plane.
- D. Stacked switches and VLT peers allow "single pane of glass" management by maintaining a single control plane.
正解：C
質問 # 41
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?
- A. M6220
- B. MXL
- C. M6348
- D. M8024-K
正解：B
質問 # 42
......
問題集でリアルEMC DEA-5TT2試験問題 [更新されたのは2023年]：https://jp.fast2test.com/DEA-5TT2-premium-file.html
試験準備には欠かさない！DEA-5TT2問題解答無料更新には100%試験合格保証 [2023年更新]：https://drive.google.com/open?id=1KOqo5VFP5-_HW3vM7kxeotkmbEdyV-gs