[2023年05月] を試そう！リアルAZ-800問題集で100%無料AZ-800試験問題集 [Q42-Q62]

[2023年05月] を試そう！リアルAZ-800問題集で100%無料AZ-800試験問題集

AZ-800のPDF問題集試験問題有効なAZ-800問題集

質問 # 42
You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed.
You need 10 limit which Hyper-V module cmdlets helpdesk users can use when administering Server 1 remotely.
You configure Just Enough Administration (JEA) and successfully build the role capabilities and session configuration files.
How should you complete the PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/powershell/scripting/learn/remoting/jea/register-jea?view=powershell-7.2

質問 # 43
You need to run an Azure VM extension to make configuration changes to an already deployed VM. Which of the following platforms would you use to run Azure VM extensions? (Choose multiple options if required)

A. PowerShell
B. Azure Portal
C. Any of the above
D. Azure CLI
E. ARM Templates

正解：C

解説：
Azure VM extensions are the small-sized apps used to assist with the process of automation tasks and post-deployment configuration on Azure VMs. You can run Azure VM extensions using PowerShell, Azure CLI, Azure Portal, and Azure Resource Manager templates portal. Azure Virtual Machine extensions can be paired with a new Virtual Machine deployment or you can run them against an existing system.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/extensions/features-windows

質問 # 44
You have on-premises file servers that run Windows Server as shown in the following table.
You have the Azure file shares shown in the following table.
You add a Storage Sync Service named Sync1 and an Azure File Sync sync group named Group1. Group1 uses share1 as a cloud endpoint.
You register Server1 and Server2 with Sync1. You add D:\Folder1 from Server1 as a server endpoint in Group1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/azure/storage/file-sync/file-sync-planning

質問 # 45
You create a new Azure subscription.
You plan to deploy Azure Active Directory Domain Services (Azure AD DS) and Azure virtual machines.
You need to ensure that the virtual machines can join Azure AD DS.
Which three actions should perform in sequence? To answer, move the appropriate actions from the list of action of the answer area and arrange them in the correct order.

正解：

解説：

1 - Create an Azure virtual network.
2 - Create an Azure AD DS instance.
3 - Modify the settings of the Azure virtual network.

質問 # 46
Your network contains an Active Directory Domain Services (AD DS) forest named contoso.com. The forest contains a child domain named east.contoso.com.
in the contoso.com domain, you create two users named Admin1 and Admin2.
You need to ensure that the users can perform the following tasks:
* Admin1 can create and manage Active Directory sites.
* Admin2 can deploy domain controller to the easl.conloso.com domain.
The solution must use the principle of least privilege.
To which group should you add each user? To answer, select the appropriate options in the answer area.
NOTE Each correct selection is worth one point.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/windows-server/remote/remote-access/ras/multisite/configure/step-2-configure-the-multisite-infrastructure

質問 # 47
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com.
You need to identify which server is the PDC emulator for the domain.
Solution: From a command prompt, you run netdom.exe query fsmo.
Does this meet the goal?

A. Yes
B. No

正解：B

質問 # 48
You have a server named Server1 that runs Windows Server. Server1 has the storage pools shown in the following table.

You plan to create a virtual disk named VDisk1 that will use storage tiers. Which pools can you use to create VDisk1 ?

A. Pool only
B. Pool1 and Pool2 only
C. Pool 2only
D. Pool1 and Pool3 only
E. Pool2 and Pool3 only
F. Pool3 only
G. Pool, Pool2, and Pool3

正解：E

解説：
Storage tiering requires both standard HDDs and SSDs. We cannot use Pool1 because it does not have any SSDs.

質問 # 49
Case Study 2 - Contoso, Ltd
Overview
Contoso, Ltd. is a company that has a main office in Seattle and two branch offices in Los Angeles and Montreal.
Existing Environment
AD DS Environment
The network contains an on premises Active Directory Domain Services (AD DS) forest named contoso.com. The forest contains two domains named contoso.com and canada.contoso.com.
The forest contains the domain controllers shown in the following table.

All the domain controllers are global catalog servers.
Server infrastructure
The network contains the servers shown in the following table.

A server named Server4 runs Windows Server and is in a workgroup. Windows Firewall on Server4 uses the private profile.
Server2 hosts three virtual machines named VM1, VM2, and VM3.
VM3 is a file server that stores data in the volumes shown in the following table.

Group Policies
The contoso.com domain has the Group Policies Objects (GPOs) shown in the following table.

Existing Identities
The forest contains the users shown in the following table.

The forest contains the groups shown in the following table.

Current Problems
When an administrator signs in to the console of VM2 by using Virtual Machine Connection, and then disconnects from the session without signing out, another administrator can connect to the console session as the currently signed in user.
Requirements
Technical Requirements
Contoso identifies the following technical requirements:
Change the replication schedule for all site links to 30 minutes.
Promote Server1 to a domain controller in canada.contoso.com.
Install and authorize Server3 as a DHCP server.
Ensure that User1 can manage the membership of all the groups in Contoso\OU3.
Ensure that you can manage Server4 from Server1 by using PowerShell remoting.
Ensure that you can run virtual machines on VM1.
Force users to provide credentials when they connect to VM2.
On VM3, ensure that Data Deduplication on all volumes is possible.
Question
You need to meet the technical requirements for VM2.
What should you do?

A. Enable enhanced session mode.
B. Enable the Guest services integration service.
C. Implement shielded virtual machines.
D. Implement Credential Guard.

正解：A

解説：
Prevent a VMConnect user from taking over another user's VMConnect session Turn on enhanced session mode on Hyper-V host.
Not having enhanced session mode turned on may pose a security and privacy risk. If a user is connected and logged on to a virtual machine through VMConnect and another authorized user connects to the same virtual machine, the session will be taken over by the second user and the first user will lose the session. The second user will be able to view the first user's desktop, documents, and applications.
https://learn.microsoft.com/en-us/windows-server/virtualization/hyper-v/learn-more/hyper-v- virtual-machine-connect

質問 # 50
Your network contains an on -premises Active Directory Domain Services (AD DS) domain named contoso.com The domain contains the objects shown in the following table.

You plan to sync contoso.com with an Azure Active Directory (Azure AD) tenant by using Azure AD Connect You need to ensure that all the objects can be used in Conditional Access policies What should you do?

A. Change the scope of Group2 to Universal
B. Clear the Configure device writeback option.
C. Change the scope o' Group1 and Group2 to Global
D. Select the Configure Hybrid Azure AD join option.

正解：D

解説：
Hybrid Azure AD join needs to be configured to enable Computer1 to be used in Conditional Access Policies. Synchronized users, universal groups and domain local groups can be used in Conditional Access Policies.

質問 # 51
You plan to deploy a containerized application that requires .NET Core.
You need to create a container image for the application. the image must be as small as possible.
Which base image should you use?

A. Nano Server
B. Windows
C. Server Cote
D. Windows Server

正解：A

解説：
Reference:
https://techcommunity.microsoft.com/t5/containers/nano-server-x-server-core-x-server-which-base-image-is-the-right/ba-p/2835785

質問 # 52
You need to meet the security requirements for passwords.
Where should you configure the components for Azure AD Password Protection? lo answer, drag the appropriate components to the correct locations. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE Each correct selection is worth one point.

正解：

解説：

質問 # 53
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers as shown in the following table.

The contoso.local zone contains zone delegations for east.contoso.local and west.contoso.local. All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: You configure Server2 and Server3 to forward DNS requests to 10.0.1.10.
Does this meet the goal?

A. Yes
B. No

正解：B

質問 # 54
Hotspot Question
You have an Azure Active Directory Domain Services (Azure AD DS) domain.
You create a new user named Admin1.
You need Admin1 to deploy custom Group Policy settings to all the computers in the domain. The solution must use the principle of least privilege.
What should you include in the solution? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point

正解：

解説：

Explanation:
https://docs.microsoft.com/en-us/azure/active-directory-domain-services/manage-group-policy

質問 # 55
You have a server named Server1 that has the Hyper-V server role installed. Server1 hosts the virtual machines shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

正解：

解説：

質問 # 56
Case Study 2 - Contoso, Ltd
Overview
Contoso, Ltd. is a company that has a main office in Seattle and two branch offices in Los Angeles and Montreal.
Existing Environment
AD DS Environment
The network contains an on premises Active Directory Domain Services (AD DS) forest named contoso.com. The forest contains two domains named contoso.com and canada.contoso.com.
The forest contains the domain controllers shown in the following table.

All the domain controllers are global catalog servers.
Server infrastructure
The network contains the servers shown in the following table.

A server named Server4 runs Windows Server and is in a workgroup. Windows Firewall on Server4 uses the private profile.
Server2 hosts three virtual machines named VM1, VM2, and VM3.
VM3 is a file server that stores data in the volumes shown in the following table.

Group Policies
The contoso.com domain has the Group Policies Objects (GPOs) shown in the following table.

Existing Identities
The forest contains the users shown in the following table.

The forest contains the groups shown in the following table.

Current Problems
When an administrator signs in to the console of VM2 by using Virtual Machine Connection, and then disconnects from the session without signing out, another administrator can connect to the console session as the currently signed in user.
Requirements
Technical Requirements
Contoso identifies the following technical requirements:
Change the replication schedule for all site links to 30 minutes.
Promote Server1 to a domain controller in canada.contoso.com.
Install and authorize Server3 as a DHCP server.
Ensure that User1 can manage the membership of all the groups in Contoso\OU3.
Ensure that you can manage Server4 from Server1 by using PowerShell remoting.
Ensure that you can run virtual machines on VM1.
Force users to provide credentials when they connect to VM2.
On VM3, ensure that Data Deduplication on all volumes is possible.
Question
Hotspot Question
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:
Box1: No
Admin1 is a domain user, thus only password settings which are applied on DCs will work in this case. From given GPOs only Default Domain Policy are applied on DCs, so minimum passwords length = 10 -> Admin1 does not have to use longer password.
Box2: Yes
User1 is a domain user too so we have same situation as above: minimum passwords length =
10 -> User1 must use a password that has at least 10 characters.
Box3: No
Password settings for local users on Server1 are comming from GPO which is applied to Server1.
Server1 is in OU=Member Servers. OU is linked with GPO2 thus local users on Server1 must use a password that has at least 8 characters.

質問 # 57
You haw an Azure virtual machine named VM1 that runs Windows Server
You need to configure the management of VM1 to meet the following requirements:
* Require administrators to request access to VM1 before establishing a Remote Desktop connection.
* Limit access to VM1 from specific source IP addresses.
* Limit access to VMI to a specific management port
What should you configure?

A. Azure Active Directory (Azure AD) Privileged identity Management (PIM)
B. Azure Front Door
C. Microsoft Defender for Cloud
D. a network security group (NSG)

正解：C

解説：
Reference:
https://docs.microsoft.com/en-us/azure/defender-fo

質問 # 58
SIMULATION
SRV1 contains a virtual machine named VM1.
You need attach c:\vhds\Disk1.vhdx to VM1. The solution must ensure that Disk1 can be expanded dynamically when VM1 runs.
To complete this task, sign in the required computer or computers.

正解：

解説：

質問 # 59
You plan to deploy an Azure virtual machine that will run Windows Server.
You need to ensure that an Azure Active Directory (Azure AD) user [email protected] can connect 10 the virtual machine by using the Azure Serial Console.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

質問 # 60
Hotspot Question
You have a server named Server1 that runs Windows Server. Server1 has a just-a-bunch-of- disks (JBOD) enclosure attached.
You plan to create a storage pool on Server1 and a virtual disk that will use a mirror layout.
You are considering whether to use a two-way or a three-way mirror layout.
What is the minimum number of disks required for each type of mirror layout? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:
Resiliency levels
To create a highly available virtual disk, you need at least one physical disk that satisfies the following requirements:
1.One physical disk is required to create a storage pool.
2.A minimum of two physical disks are required to create a resilient mirror virtual disk.
3.A minimum of three physical disks are required to create a virtual disk with resiliency through parity.
4.Three-way mirroring requires at least five physical disks.
5.Disks must be blank and unformatted. No volume can exist on the disks.
https://learn.microsoft.com/en-us/training/modules/implement-storage-spaces-storage-spaces- direct/2-define-storage-spaces-architecture-components

質問 # 61
Your network contains an Active Directory Domain Services (AD DS) forest named contoso.com. The forest contains a child domain named east.contoso.com.
in the contoso.com domain, you create two users named Admin1 and Admin2.
You need to ensure that the users can perform the following tasks:
* Admin1 can create and manage Active Directory sites.
* Admin2 can deploy domain controller to the easl.conloso.com domain.
The solution must use the principle of least privilege.
To which group should you add each user? To answer, select the appropriate options in the answer area.
NOTE Each correct selection is worth one point.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/windows-server/remote/remote-access/ras/multisite/configure/step-2-configure-the-multisite-infrastructure