2023年最新のHPE6-A66問題集の無料PDFゲットせよ！最近更新された問題 [Q32-Q51]

2023年最新のHPE6-A66問題集の無料PDFゲットせよ！最近更新された問題

HPE6-A66認定試験問題集には60練習テスト問題

質問 # 32
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)

A. square footage
B. types of users and their devices
C. ceiling height
D. number of users
E. number of buildings

正解：A、C

質問 # 33
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.

This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?

A. 47.000 square feet {4,365 square meters)
B. 55.750 square feet {5,175 square meters)
C. 56.350 square feet {5,235 square meters)
D. 338,100 feet {31,410 square meters)

正解：C

質問 # 34
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?

A. SFP
B. QSFP28
C. SmartRate
D. QSFP+ LC

正解：C

質問 # 35
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?

A. PAPI mobility
B. Dynamic segmentation
C. iPsec tunneling
D. GRE tunneling

正解：C

質問 # 36
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?

A. New Project
B. New Site
C. New Campus
D. New Express Mode

正解：C

質問 # 37
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.

Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?

A. 0
B. 1
C. 2
D. 3

正解：A

質問 # 38
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?

A. AP power at 75% and a measurement of -80 dBM on the measuring device
B. AP power at 50% and a measurement of -65 dBM on the measuring device
C. AP power at 100% and a measurement of -65 dBM on the measuring device
D. AP power at 75% and a measurement of -90 dBM on the measuring device

正解：C

質問 # 39
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?

A. 802.11r
B. S02.11V
C. 802.11 ax
D. S02.11h

正解：C

質問 # 40
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?

A. 0
B. 1
C. 2930F
D. 3810M

正解：C

質問 # 41
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?

A. 5406R switches
B. 2930M switches
C. 2930F switches
D. 3810M switches

正解：B

質問 # 42
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?

A. Two 7030 mobility controller and campus APs in a cluster
B. FRAPs in a cluster
C. lAPs in a cluster
D. Two 7205 mobility controller and campus APs in a cluster

正解：B

質問 # 43
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?

A. Two 2930F 24-port POE+ switches
B. One 2930M 48-port POE+ switch
C. Two 2930M 24-port POE+ switches
D. One 3810M 40G 8 HPE Smart Rate switch

正解：B

質問 # 44
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?

A. 10 Gbps
B. 1 Gbps
C. 2.5 Gbps
D. 5 Gbps

正解：C

質問 # 45
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?

A. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
B. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
C. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
D. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet

正解：B

質問 # 46
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)

A. implementing adequate security measures to ensure PCI compliance
B. providing consistent performance on all available channels
C. determining the RF channel bandwidth consumed per Barcode scanner
D. roaming between APs
E. encountering RF interference by devices

正解：A、B

質問 # 47
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?

A. Multi-mode fiber between campus switches
B. Two outdoor AP 367s
C. Two outdoor AP 387s
D. Two outdoor AP 510s

正解：B

質問 # 48
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?

A. RJ-45
B. Micro-B USB
C. USB-A
D. RS-232

正解：B

質問 # 49
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?