2023年最新の実際に出るOMS-435問題集テストエンジン試験問題はここにある
更新された公式資料はOMS-435認証済みのOMS-435問題集PDF
Salesforce OMS-435 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
質問 14
An integration Procedure uses an HTTP action to make a REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.
How should the developer configure the Integration Procedure to meet this requirement?
- A. Use a Remote Action that calls the XMLStreamWriter class
- B. Use a Remote Action that calls the XMLStreamReader class
- C. Use a DataRaptor Transform to convert JSON to XML
- D. Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.
正解: C
質問 15
Refer to the following row-versioned calculation matrix.
The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?
- A. The row is deleted in Version 3 and Version 1.
- B. The row is delete only in Version 3.
- C. The row is deleted In Versions 2 and 3 but will remain in Version 1.
- D. The row is deleted in all versions
正解: B
質問 16
A)
B)
- A. Option B
- B. Option A
正解: B
質問 17
A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:
- A. To %sDetails: Customer|0: ID$
- B. To %Details: Customer|1: ID%
- C. To %%sDetails: Customer|0: ID%%
- D. To %Details: Customer|n: ID%
正解: B
質問 18
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. The flag passData.JSON in the parent OmniScript in not configured correctly.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- D. Both parent and embedded OmniScripts have the same element name for the Set Values element.
正解: B
質問 19
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. 12.99
- B. 13.99
- C. Null
- D. 12.99,13.99
正解: A
質問 20
A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?
- A. Use a Datatable element
- B. Set the class'' collapsible'' on the block element
- C. Use a conditional FlexCard State
- D. Set the collapsible property on the block element
正解: C
質問 21
A developer is configuring the API URL in an HTTP Action element within an Integration procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?
- A. %SetValues Date
- B. (' Setvalues'] [ 'Date']
- C. {(SetValues. Date)}
- D. x%SetValues.Date%
正解: D
質問 22
...... configure Additional input to send exactly the same data? Assume that the develop checked Send Only Additional input.
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
正解: D
質問 23
Refer to the exhibit below. What is the merge code needed for this Integration Procedure structure to pass a CaseData node from the HTTP Action's output to the DataRaptor Transform Action?
- A. {{CaseData}}
- B. %HTTPGetDetails:CaseData%
- C. {{ HTTPGetCaseDetails:CaseData}}
- D. %DRXformCaseData: CaseData%
正解: D
質問 24
Refer to the exhibit.
What JSON code correct represent the step in the OmniScript Structure panel shown?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option A
- D. Option C
正解: D
質問 25
Which two fields in an Integration Procedure can use a function like CONCAT or DATEDIFF?
Choose 2 answers
- A. In a Remote Action, in an Additional Output value field.
- B. In a Response Action, in an Additional input value field.
- C. In Procedure Configuration, in a Tracking Custom Data value field.
- D. In a Remote Action, in a Remote Options value field.
正解: A,B
質問 26
A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.
During testing, several fields display with the correct data, but one of the fields shows only the label.
What could cause this?
- A. There are no test parameters configured.
- B. The field is null 0 the Salesforce record.
- C. {recordld} us misspelled in the Data Source Input Map.
- D. The fields have exceeded the maximum number allowed on the card.
正解: D
質問 27
A developer is creating a FlexCard and needs to display additional information using a Flyout.
Which two types of components can the developer embed m the flyout?
Choose 2 answer
- A. An OmniScript
- B. A Child FlexCard
- C. An Integration Procedure
- D. A DataRaptor
正解: B,C
質問 28
A developer is configuring the API URL in an HTTP Action element within an Integration procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?
- A. (' Setvalues'] [ 'Date']
- B. %SetValues Date
- C. {(SetValues. Date)}
- D. x%SetValues.Date%
正解: B
質問 29
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
- B. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- C. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
- D. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
正解: C
質問 30
A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?
- A. To %%Details:Customer|1:ID%
- B. To %%Details:Customer|n:ID%
- C. To $Details:Customer|0:ID$
- D. To %%Details:Customer|0:ID%%
正解: A
質問 31
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Delete or Deactivate the Set Values element.
- B. Deactivate the contextId key/value pair
- C. Update the ContextId value to specify an id from the Production org.
- D. Add a Show/Hide condition on the Set Values element.
正解: D
質問 32
A developer need to configure a calculation procedure to calculation a subtotal using two different depending on whether the input Boolean variable is Customer is set to true or false.
How should a developer configure the calculation procedure to conditionally execute the correct formula?
- A. Use two separate Calculation Steps with the Conditional Step property selected: reference just the isCustomer variable in the Conditional syntax (no comparison necessary)
- B. Use two separate Calculation Steps with the Conditional Step property selected: use the ISTRUE(isCustomer) and NOT (ISTRUE) (isCustomer) functions in the Condition syntax.
- C. Use two separate Calculation Steps with the Conditional Step property selected: compare the isCustomer variable directly to the literal true and false values in the Condition syntax.
- D. Use a single Calculation Steps with IF statement directly in the formula definition to reference the isCustome variable and conditionally perform the appropriate calculation.
正解: A
質問 33
A developer need to use the CONTIF function to process data entered by the user in an OmniScript. The output of the function needs to be displayed to the user immediately in the current step.
Based on best practice, what element should the developer use this function in?
- A. A Set Values element
- B. A Range element
- C. A formula element
- D. A Calculation Action element
正解: C
質問 34
......
最新版無料体験を掴み取れ！Salesforce OMS-435問題集PDFは更新された：https://jp.fast2test.com/OMS-435-premium-file.html
最新リリースのOMS-435問題集はSalesforce Developer認証済み：https://drive.google.com/open?id=1ZVP3j535ya7RZ1-3i1UywF6cSyBqM_Zy