2023年最新のに更新された検証済みの合格させる4A0-114リアル試験問題と解答
問題集返金保証付きの4A0-114問題集公式問題集
Nokiaは、ネットワークソリューションの世界的なプロバイダーであり、そのBorder Gateway Protocol（BGP）はネットワーク業界における基本的な技術です。Nokia 4A0-114認定試験は、BGPの基礎とそのサービスにおける使用についての知識とスキルを試験することを目的としています。
Nokia 4A0-114 試験は、Nokia Service Routers を使用する複雑なネットワークの設計、実装、およびメンテナンスを担当するネットワークエンジニアを対象としています。この試験は、ネットワークの概念とプロトコルの理解があり、ネットワークデバイスの構成とトラブルシューティングの経験がある候補者に適しています。この試験は、ベンダー固有のものであり、Nokia Service Routers 上での BGP の実装に焦点を当てています。試験に合格すると、候補者は BGP の熟練度と Nokia Service Routers 上での BGP の構成とトラブルシューティング能力を証明できます。Nokia 4A0-114 認定は、ネットワークエンジニアがスキルを向上させ、ネットワーキング業界でキャリアを進めるための貴重な資産です。
質問 # 18
The diagram shows EVPN services and their associated route-target (RT) values. For the distributed VPRN service in the diagram, what will be the route-target value included in the EVPN routes exchanged between routers PE1 and PE2 to populate the VPRN's route table?
- A. 65200:300
- B. 65200:200
- C. 65200:400
- D. 65200:100
正解：B
質問 # 19
Which of the following statements about router reflectors is FALSE?
- A. A router reflector disables the iBGP split-horizon rule for its clients.
- B. Route reflectors are used to reduce the number of iBGP sessions required in an AS.
- C. A route reflector can have both iBGP and eBGP clients.
- D. A full iBGP mesh is required among route reflectors.
正解：D
質問 # 20
Which of the following statements about VXLAN encapsulation is TRUE?
- A. It uses VXLAN Network ID (VNI) to identify the transport tunnel and an additional IP header to identify the service tunnel.
- B. It uses an additional IP header to identify the transport tunnel and a VXLAN Network ID (VNI) to identify the service tunnel.
- C. It uses a VXLAN Network ID (VNI) to identify the transport tunnel and an MPLS label to identify the service tunnel.
- D. It uses an MPLS label to identify the transport tunnel and a VXLAN Network ID (VNI) to identify the service tunnel.
正解：A
質問 # 21
Click the exhibit.
Assuming the network is IPv6 only, which of the following configurations on the Nokia
7750 SR router A can establish an IPv6 BGP session to router B?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
正解：C
質問 # 22
Which of the following statements about IPv6 Link-Local addresses is FALSE?
- A. They have an interface ID derived by default from the interface's IPv4 address.
- B. They are only valid for communication within the same broadcast domain.
- C. They all have the same 64-bit subnet prefix.
- D. They are assigned to every physical interface running IPv6.
正解：A
質問 # 23
Which of the following statements about route reflector clusters is FALSE?
- A. When a route reflector reflects a route, it adds its cluster ID to the Cluster_list attribute.
- B. Within an AS, route reflectors belonging to different clusters do not need to be fully-meshed among themselves.
- C. A router can be the client of multiple route reflectors within its AS.
- D. Multiple clusters may be configured within an AS.
正解：A
質問 # 24
Routers PE1 and PE2 in the diagram exchange MP-BGP route updates that carry the route-target value associated with the EVPN service VPLS 300. What type of addressing information is included in those route updates?
- A. EVPN MAC
- B. Label-IPv4
- C. EVPN IP-Prefix
- D. VPN-IPv4
正解：C
質問 # 25
Click the exhibit.
Router R1 is a route reflector with clients R2, R5 and R6. Prefixes advertised by router R5 have a local preference of 200. Router R3 advertises the prefix 192.168.1.0/27 to routers R5 and R6.
Assuming that none of the routers in AS 65540 is configured with "advertise-external", what is the expected output of "show router bgp routes" on router R5?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
正解：D
質問 # 26
Which of the following regarding BGP Path Identifier is FALSE?
- A. Path-ID is an optional transitive attribute used to advertise multiple paths.
- B. Path-ID uniquely identifies each path advertised to a neighbor.
- C. Path-ID is a four-octet identifier pre-pended to the NLRI field of a BGP update.
- D. A BGP speaker that re-advertises a route must generate its own Path-ID.
正解：A
質問 # 27
Which of the following statements about BGP is FALSE?
- A. The multihop parameter needs to be configured when eBGP peers are not adjacent to each other.
- B. iBGP peers have to be adjacent to each other.
- C. Route reflectors can reduce the number of iBGP sessions required.
- D. Peers need to be IP reachable to establish a BGP session.
正解：B
質問 # 28
Click the exhibit.
Assume all router-IDs are properly configured, and global IPv6 addresses are used to establish eBGP sessions.
Which of the following configurations is required on router A so that router B can exchange traffic with router D?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
正解：C
質問 # 29
A BGP router receives the following routes. Which route is selected as best route?
1: 192.169.20.0/24 with local preference 100, MED 150, AS Path 65300 65200 from an eBGP neighbor
2: 192.169.20.0/24 with local preference 100, MED 100, AS Path 63200 from an iBGP neighbor
3: 192.169.20.0/24 with local preference 200, MED 150, AS Path 65400 63200 from an iBGP neighbor
4: 192.169.20.0/24 with local preference 200, MED 100, AS Path 63700 from an eBGP neighbor
- A. Route 1
- B. Route 2
- C. Route 3
- D. Route 4
正解：B
質問 # 30
The configuration of an Nokia 7750 SR is given below. Router Rl has established BGP sessions with routers R2 and R3. Which of the following is TRUE?
- A. Router R1forms eBGP sessions with routers R2 and R3.
- B. Router R1forms iBGP sessions with routers R2 and R3.
- C. Router R1forms an iBGP session with router R2, and an eBGP session with router R3.
- D. The types of BGP sessions with routers R2 and R3 cannot be determined.
正解：D
質問 # 31
In the diagram below, an end-to-end transport tunnel needs to be established between PE1 and PE2 using MP-BGP. Which of the following items is NOT required?
- A. MP-BGP address families label-ipv4 or label-ipv6 need to be supported on each of the edge routers.
- B. Each PE router needs to advertise an IP address as a labeled BGP route to identify the tunnel endpoint.
- C. Either RSVP, LDP, or segment routing tunnels need to be established within each region.
- D. Either RSVP, LDP, or segment routing tunnels need to be established between regions.
正解：B
質問 # 32
What does an EVPN VPLS do that a traditional VPLS does not do?
- A. It maintains a forwarding database.
- B. It provides a multipoint connectivity service.
- C. It uses control-plane MAC learning.
- D. It acts as a switch, carrying full layer-2 frames between customer sites.
正解：C
質問 # 33
Which of the following statements about EVPN services is FALSE?
- A. The goal of an EVPN service is to provide layer-2 or layer-3 connectivity among two or more customer sites.
- B. The same BGP address family can be used to populate the forwarding database of an EVPN VPLS and the route table of an EVPN VPRN.
- C. A local layer-2 EVPN service is referred to as a backhaul VPLS.
- D. EVPN services support signaling for the use of MPLS and VXLAN tunnels.
正解：D
質問 # 34
Click the exhibit.
Which of the following is a valid confederation configuration for Router R2?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
正解：D
質問 # 35
In the diagram, the BGP import policy "north-and-south" is applied to router R5. Router R1 advertises the prefix 140.100.1.0/24 with a community set to "65200:1". Which of the following statements about how router R5 processes the received route update for prefix 140.100.1.0/24 is TRUE?
- A. The prefix's community value is removed.
- B. The prefix's local preference is set to 20.
- C. The prefix's community value is modified to 65200:2.
- D. The prefix is rejected.
正解：C
質問 # 36
......
ノキア4A0-114試験は、BGPルーティング、BGP属性、BGPスケーリング、BGPセキュリティなど、さまざまなBGP関連トピックをカバーする60の多肢選択問題で構成されています。試験は90分間の時間制限があり、合格するためには少なくとも80％のスコアが必要です。試験は英語、日本語、中国語など、複数の言語で利用可能です。
更新されたPDF（2023年最新）実際にあるNokia 4A0-114試験問題：https://jp.fast2test.com/4A0-114-premium-file.html
検証済みの4A0-114試験問題集PDF[2023年最新] 成功の秘訣はFast2test：https://drive.google.com/open?id=1ft-OLfP6837h31-AnWDvXI0Pcuc2bKpq