[2023年更新]最新C-THR92-2305試験問題集で最新SAP試験合格させます [Q10-Q35]

[2023年更新]最新C-THR92-2305試験問題集で最新SAP試験合格させます

高合格率C-THR92-2305問題集解答でC-THR92-2305テストエンジンと正解回答

質問 # 10
You want to create a report that returns only employees who were born in 1961. You also want to enable the person who runs the report to specify a different birth year.
How can you achieve this?
Note: There are 2 correct answers to this question.

A. 1. Select Date Options from the Toolbar.
2. Set Date Type to Show All.
3. Select Manage Run Time Filters from the Toolbar.
4. Expand Personal Information table.
5. Select Date of Birth column.
6. Select OK.
B. 1. Select Manage Query Filters.
2. Expand Personal Information table and select Date of Birth.
3. Select Greater than or equal to from the operator list.
4. Set Custom filter date to 1/1/1961.
5. Select OK and then select Add.
6. Expand Personal Information table and select Date of Birth.
7. Select less than or equal to from the operator list.
8. Set Custom filter date to 12/31/1961.
9. Select OK.
C. 1. Select Date Options from the Toolbar.
2. Set Date Type to Date Range (On Start Date).
3. Set From date to 1/1/1961 and To date to 12/31/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Set Selectable At Runtime.
D. 1. Select Date Options from the Toolbar.
2. Set Date Type to As of Date.
3. Set As of Date to 1/1/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Select Date of Birth from End Date Column.
7. Set Selectable At Runtime.

正解：B、C

質問 # 11
When you share a canvas report, from where can the user access that report?
Note: There are 2 correct answers to this question.

A. Home Page
B. Report Center
C. Metrics Panel
D. Reporting Menu

正解：B、D

質問 # 12
User A maintains a canvas report of employee contact information. User A leaves the company. Another
report designer, user B, is assigned the responsibility to maintain the report, but
currently CANNOT modify the report.
How do you allow user B to modify only this report?

A. Edit authorship of the report.
B. Edit user B's WFA Role configuration.
C. Update the reports' sharing to include user B.
D. Assign User B the permission Access All Reports.

正解：C

質問 # 13
You support report consumers. A report consumer asks if it is possible to save the selected items when viewing the detail of a chart in a story report (see screenshot).

How do you tell the report consumer to save the state?
Note: There are 2 correct answers to this question.

A. View the chart in explorer mode and choose + New View to create an explorer view.
B. Select the chart on the canvas, view the bookmark menu and choose Bookmark Current State.
C. View the chart in explorer mode, view the action menu, and choose Export.
D. Select the chart on the canvas, view the action menu, and choose Export.

正解：B、C

質問 # 14
You are using Report Center to share a canvas report. You share the report with a Dynamic Group (see attached image).

Who is the report shared with?

A. Employees of Atlanta
B. Employees of the Sales department
C. Employees of the Sales departments and all employees of Atlanta
D. Employees of the Sales department of Atlanta

正解：D

質問 # 15
Which permissions should you assign to allow a user to add a new story that will include Career Development Planning data?
Note: There are 2 correct answers to this question.

A. Report Permission -> Create Report - Story
B. Career Development Planning -> Data Access: Report - Story
C. Career Development Planning -> Career Development Plan (CDP) Access Permission
D. Report Permission -> Create Report

正解：A、B

質問 # 16
Which of the following would make it possible for a filter to update multiple charts using linked analysis?
Note: There are 2 correct answers to this question.

A. The data sources for the charts should contain linked dimensions.
B. The charts should have the same data source.
C. The charts should use the same measures.
D. The chart should use the same aggregation.

正解：A、C

質問 # 17
Which tool can you use to upload a report from the test instance to the production instance?
Note: There are 2 correct answers to this question.

A. Report Distributor
B. Report Center
C. FTP Distribution
D. Report Transfer

正解：B、D

質問 # 18
Why is it important to consider the People step of the report definition when you share a table report
with another user?

A. The user may NOT have the same line of sight.
B. The user may NOT have access to run reports.
C. The user may NOT have access to the fields in the report.
D. The user may NOT have access to the relevant report domain.

正解：A

質問 # 19
You create a report page and want to change the grid column width and grid row height. Where can you do this?

A. Edit page properties
B. Edit designer properties
C. Edit Query
D. Validate page

正解：B

質問 # 20
A table report is shared with a user. That user CANNOT see the table report in the Report Center list.
Which role-based permission has NOT been set correctly for this user?

A. Create Report access to the domain
B. Run Report access to the domain
C. Ability to manage Tiles and Dashboards
D. Access to Insights

正解：C

質問 # 21
How do you configure the Builder to display the table in the screenshot in a story report? Note: There are 3 correct answers to this question. Headcount by Location

A. Table Structure: Aggregated List
B. Row: Count
C. Column: Count
D. Table Structure: Cross-tab

正解：B、C、D

質問 # 22
What features are available only when you use Business Intelligence and Reporting Tools (BIRT) with
Table Reports?
Note: There are 2 correct answers to this question.

A. Simple data extraction
B. FTP scheduling
C. Printable chart with custom formatting requirements
D. Advanced cell level formulas

正解：C、D

質問 # 23
When you use a column of type text as a measure in a pivot query, which of the following pivot functions are available?
Note: There are 2 correct answers to this question.

A. Concatenate
B. Max
C. Distinct Count
D. Sum

正解：A、C

質問 # 24
What permission type applied to table reports is defined by a combination of the user's View
permissions and Target Population in role-based permissions?

A. Cell level permission
B. Row level permission
C. Field level permission
D. Run report permission

正解：A

質問 # 25
You are configuring a story report. You add the image widget to the top-left corner of the canvas. You
then upload the SuccessFactors logo in the Builder and select the logo image so it
displays on the canvas. When you preview the report in View Mode, the logo appears centered on the
canvas.
What action do you take so the Logo appears in the top-left corner when viewing the report in view
mode?

A. In Styling for the image, set the Image Properties to Pan.
B. In Builder for the image, set the image to Dynamic.
C. In Designer Mode, add another widget under the image.
D. In Styling for the page, set the Page Size to Fixed.

正解：C

質問 # 26
You want to return the quarter to date event records to count terminations.
Which options would you set in the time filter?
Note: There are 3 correct answers to this question.

A. Range period: Actual start/end date of the current quarter
B. Records Returned: Include only records that begin in your defined date range
C. Range Type: fixed
D. Range Parameters: Period to Date
E. Range Type: dynamic

正解：B、D、E

質問 # 27
How do you configure the Builder to display the table in the screenshot in a story report? Note: There are 3 correct answers to this question. Headcount by Location

A. Table Structure: Aggregated List
B. Row: Count
C. Column: Count
D. Table Structure: Cross-tab

正解：B、C、D

質問 # 28
The data source used by the two tables only displays current (active) employees.
How would you configure a filter on the table End of Previous Year Headcount by Location to display
data accurately?

Note: There are 2 correct answers to this question.

A. Set a filter on Hire Date (Member)
B. Set a filter on Hire Date (Range)
C. Set the Range type to Standard
D. Set the Range type to Offset

正解：B、D

質問 # 29
You want to create a report that returns only employees who were born in 1961. You also want to
enable the person who runs the report to specify a different birth year.
How can you achieve this?
Note: There are 2 correct answers to this question.

A. 1. Select Date Options from the Toolbar.
2. Set Date Type to Show All.
3. Select Manage Run Time Filters from the Toolbar.
4. Expand Personal Information table.
5. Select Date of Birth column.
6. Select OK.
B. 1. Select Manage Query Filters.
2. Expand Personal Information table and select Date of Birth.
3. Select Greater than or equal to from the operator list.
4. Set Custom filter date to 1/1/1961.
5. Select OK and then select Add.
6. Expand Personal Information table and select Date of Birth.
7. Select less than or equal to from the operator list.
8. Set Custom filter date to 12/31/1961.
9. Select OK.
C. 1. Select Date Options from the Toolbar.
2. Set Date Type to Date Range (On Start Date).
3. Set From date to 1/1/1961 and To date to 12/31/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Set Selectable At Runtime.
D. 1. Select Date Options from the Toolbar.
2. Set Date Type to As of Date.
3. Set As of Date to 1/1/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Select Date of Birth from End Date Column.
7. Set Selectable At Runtime.

正解：B、C

質問 # 30
You are creating a query for a historical compensation story report in Query Designer. You have added the Job Information table to the query, configured a scope filter, and previewed the result to verify you are returning the appropriate employees.
You add the related table Compensation to the query.

When you preview the query, you only get the current compensation information for the employees.
Why do you only receive the current records?
Note: There are 2 correct answers to this question.

A. The Query Advanced Filter is set to: Job Information effective start date equal to Dynamic Date:
Today.
B. The compensation table time filter is set to: As of Date > Dynamic Date: Today.
C. The Job information table time filter is set to: As of Date > Dynamic Date: Today.
D. The compensation table time filter is set to: Same Filter as First Table.

正解：C、D

質問 # 31
You are using Report Center to share a canvas report. You share the report with a Dynamic Group (see
attached image).

Who is the report shared with?

A. Employees of Atlanta
B. Employees of the Sales department
C. Employees of the Sales departments and all employees of Atlanta
D. Employees of the Sales department of Atlanta

正解：D

質問 # 32
A user wants to build a pivot chart based on a list report that has a run-time filter.
What must the user do?

A. Create the pivot chart after adding the run-time filter.
B. Create a filter group within the run-time filter before building the report.
C. Create the run-time filter before building the report.
D. Create the pivot chart before adding the run-time filter.

正解：A

質問 # 33
You are creating a query that lists employee information such as name, address, and dependent information.
The query uses Personal Information as the driving table and joins the Dependents and Address tables. You notice many employees are missing from the result set.

What are the reasons?

A. Personal Information is joined to Dependents table with a left join and the Dependents table is joined to the Address table with a left join.
B. Personal Information is joined to both the Dependents table and the Address table with a left join.
C. Personal Information is joined to both the Dependents table and the Address table with an inner join.
D. Personal Information is joined to Address table with a left join and the Address table is joined to the Dependents table with a left join.

正解：C

質問 # 34
While constructing a dashboard, you find that you need to create a tile that requires more complex configuration than what is available with the Online Tile Builder tool.
What tool can you use to create this tile?