[2022年04月] 最新のCisco 300-625認定練習テスト問題
確認済み300-625問題集と解答で一年間無料最速更新
質問 18
Which result occurs when a VSAN is deleted that contains non-trunking ports?
- A. The port configurations are cleared.
- B. The ports are moved to VSAN 1.
- C. The ports are removed from the configuration.
- D. The ports are moved to VSAN 4094.
正解: D
質問 19
Refer to the exhibits.
A storage network engineer activates a zoneset on MDS-A and verifies the successful activation (Exhibit 1).
The engineer is then notified that there is a SAN outage (Exhibit 2) What is the cause of the outage?
- A. Another network engineer issued the zone default-zone permit vsan 100 command on another switch in the fabric.
- B. Another network engineer issued the zone mode enhanced vsan 100 command on another switch in the fabric.
- C. Another network engineer activated the zoneset ZoneSetMDS-B-VSAN100 command on another switch in the fabric.
- D. Another network engineer activated zoneset ZoneSetMDS-B-VSAN100 on MDS-A.
正解: A
質問 20
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0*8914
- B. 0*8913
- C. 0*8906
- D. 0*xfc0e
正解: A
質問 21
Refer to the exhibit.
What is the result of merging the fabric?
- A. The merge is invalid.
- B. The merged fabric contains only service group Group1.
- C. The merged fabric IVR VSAN topology is set to activate.
- D. The merged fabric has NAT enabled.
正解: B
質問 22
Which action must be performed to deactivate a VSAN without losing its configuration?
- A. Isolate it.
- B. Delete it.
- C. Rename it
- D. Suspend it.
正解: D
質問 23
Drag and drop the boot issues from the left onto the correct solutions on the right.
正解:
解説:
質問 24
A storage administrator is connecting two previously configured switches to make a single fabric. When the E Ports are connected, the administrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch. Which command should the administrator use to allow these switches to work together?
- A. zoneset copy active-zoneset full-zoneset
- B. zoneset import interface fc1/1 vsan 10
- C. zoneset overwrite-control vsan 10
- D. zoneset distribute full vsan 10
正解: B
質問 25
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits?
- A. Secure Unique Device Identifier
- B. BIOS Secure Boot
- C. UEFI Secure Boot
- D. Cisco Secure Boot
正解: C
質問 26
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?
- A. All switches on the fabric must be configured for the same password.
- B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
- C. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.
- D. NTP must be configured on all devices or the configuration fails.
正解: B
質問 27
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. management server
- B. fabric controller
- C. time server
- D. name server
正解: D
解説:
Section: Implementation
Explanation
質問 28
Refer to the exhibit.
A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch. Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured as rule 1.
- B. permit vsan 1-1000 must be configured under the VSAN policy deny.
- C. permit vsan 1-1000 must be configured as rule 5.
- D. permit vsan 1-1000 must be configured under the VSAN policy allow.
正解: B
質問 29
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?
- A. show telemetry transport
- B. show analytics system-load
- C. show telemetry control stats
- D. show telemetry pipeline stats
正解: A
解説:
Section: Management and Monitoring
質問 30
A storage administrator manually configure a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID. What is the reason why the configuration is not working?
- A. Build fabric notifications were not sent to the other switches.
- B. Static domain IDs apply only after a switch is rebooted.
- C. The disruptive keyword was not used on the command.
- D. Domain manager fast restart is not enabled on the switch.
正解: B
質問 31
Which configuration is available only in Cisco DCNM-SAN Advanced mode?
- A. IVR
- B. zoning
- C. VMpath configuration
- D. template-based provisioning
正解: A
解説:
Section: Deployment
質問 32
Drag and drop the mechanisms of Cisco Secure Boot from the left into the correct order on the right.
正解:
解説:
質問 33
Drag and drop the mechanisms of Cisco Secure Boot from the left into the correct order on the right.
正解:
解説:
質問 34
Refer to the exhibit.
A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?
- A. from interface fc1/9
- B. per flow, balanced between interfaces fc1/9 and fc1/10
- C. per packet, balanced between interfaces fc1/9 and fc1/10
- D. from interface fc1/10
正解: B
解説:
Section: MDS Troubleshooting
質問 35
A storage administrator manually configures a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID. What is the reason why the configuration is not working?
- A. Build fabric notifications were not sent to the other switches.
- B. Static domain IDs apply only after a switch is rebooted.
- C. The disruptive keyword was not used on the command.
- D. Domain manager fast restart is not enabled on the switch.
正解: B
質問 36
......
Cisco 300-625 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
| トピック 10 |
|
最新の2022年最新の実際に出ると確認された300-625問題集で100%無料300-625試験問題集：https://jp.fast2test.com/300-625-premium-file.html