[2022年03月11日] 最速合格には素晴らしいE-S4HCON2022無料テストPDF本日更新です [Q24-Q44]

[2022年03月11日] 最速合格には素晴らしいE-S4HCON2022無料テストPDF本日更新です

無料でゲット！最新の2022年最新の有効な練習SAP Certified Technology Specialist E-S4HCON2022問題と解答でテストエンジン

質問 24
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?

A. The link to different patch levels to SUM
B. The corrections to the SUM Guide
C. AA
D. An overview about possible upgrade paths

正解: A,B,D

質問 25
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:

A. There is a maximum of 40 parallel R31oad processes within this specific downtime phase.
B. The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.
C. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
D. SUM is still running in uptime; the number of 40 defined R31oad processes is considered.

正解: C

質問 26
You have chosen the "Advanced" option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:

A. Conversion of application tables (PARCONVJJPG)
B. Modification adjustment (SPDD)
C. Switch to new repository (EU_SWITCH)
D. Activation of dictionary objects (ACT_UPG)

正解: B,D

質問 27
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.

A. Configure it within transaction ATC
B. Generate it by analyzing the specific custom code via RFC
C. Download it from SAP Support Portal
D. Apply the corresponding SAP note via SAP Note Assistant

正解: C

質問 28
In ICNV. How database operations synchronized between the source and the target table?

A. Deletes are directly executed in the target table by delete trigger.
B. AA

正解: A

質問 29
You want to perform custom code check via ABAP test cockpit in preparation of your SAP S/4HANA conversion? What kind of SAP System can you use to generate the custom code migration worklist?

A. AA
B. A Standalone SAP system with ABAP 7.51 or above
C. An SAP S4HANA 1709 sandbox system

正解: B,C

質問 30
You are performing an SAP S/4HANA conversion for your production system. This conversion requires that certain business functions are switched on.
Following SAP recommendations, how will you achieve this?
There are 2 correct answers to this question.
Response:

A. Import a transport request from the development system that contains the recording of the activation.
B. Activate the required business functions manually in the production system.
C. During conversion, SUM delivers some business functions already activated.
D. Specify the business functions that need to be switched on during the prepare part of SUM.

正解: A,C

質問 31
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:

A. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
B. The SAP Support Packages contained in the upgrade media
C. The SAP Support Packages found in the download directory
D. The SAP Support Packages that will be bound to the upgrade

正解: C

質問 32
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:

A. Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.
B. Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.
C. Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.
D. Perform the Unicode conversion before the upgrade to SAP ECC 6.08.

正解: D

質問 33
You want to use the downtime-optimized data conversion for your SAP S/4HANA conversion. What is the main difference from a standard SAP S/4HANA conversion?
Please choose the correct answer.
Response:

A. An additional temporary database is used during uptime
B. Dedicated application tables are migrated in uptime
C. The repository is migrated in uptime
D. TABIMJJPG is executed in uptime

正解: B

質問 34
You want to perform an SAP S/4HANA conversion using SUM with DMO. Which steps run before the beginning of the technical downtime, independent of your SUM configuration?
There are 3 correct answers to this question.
Response:

A. Creation of application tables in the SAP HANA database in phase EU_CLONE_MIG_DT_CREATE
B. Activation of dictionary objects in phase ACT_UPG
C. Import of upgrade and language data from the download directory in phase TABIM UPG
D. Generation of the new ABAP loads in phase RUN_SGEN_GENER8
E. Import of dictionary objects from the download directory in phase DDIC_UPG

正解: B,C,E

質問 35
You are executing a standard SUM procedure to update an SAP system using main configuration mode "Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:

A. At the end of the downtime
B. Early in the downtime
C. Before the downtime starts
D. As part of the cleanup process

正解: C

質問 36
In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.

A. During uptime
B. During downtime
C. During SPDD
D. Post-downtime

正解: A,D

質問 37
What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:

A. It contains a section "free space requirements"
B. It contains a troubleshooting section
C. It is target release specific
D. It is a database-specific document

正解: A,C

質問 38
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:

A. Downtime migration (EU_CLONE_MIG_DT_RUN)
B. Uptime migration (EU_CLONE_MIG_UT_RUN)
C. ParaUel distribution (PARDIST_SHD)
D. Shadow repository creation (EU_IMPORT*)

正解: B

質問 39
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:

A. By searching for transport requests that are assigned to the project SAP_ADJUST
B. By searching for transport requests in the file umodauto.Ist
C. By searching for transport requests in DIR_TRANS, subdirectory "transport"
D. By searching for transport requests named <SID>K0<number>

正解: B

質問 40
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:

A. It performs a comparison on all tables using row counts.
B. It performs a comparison of all tables using check sum.
C. It does NOT perform any table comparison.
D. It performs a comparison on selected tables using check sum.

正解: A

質問 41
You are preparing for a standard SAP S/4HANA conversion from SAP ECC on Windows with SAP MaxDB to SAP S/4HAN. You are performing the corresponding maintenance transaction with the Maintenance Planner. Which kernels do you need to select for the SAP S/4HANA conversion?
There are 2 correct answers to this question.

A. Kernel for target release, Windows, SAP HANA
B. Kernel for target release, Windows, SAP MaxDB
C. Kernel for source release, Windows, SAP MaxDB
D. Kernel for target release, Linux, SAP HANA

正解: A,C

質問 42
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step "Extraction".
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:

A. In DMO Migration Preparation
B. In Process Control Center
C. In SUM Phaselist
D. In SUM Parameters

正解: B,D

質問 43
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response: