[2022年01月] 確実合格する有効な方法Cisco試験問題集で500-920試験学習ガイド
500-920問題集とCisco Data Center Unified Computing Infrastructure Troubleshootingトレーニングコースでお客様の合格を楽にさせる学習合格試験問題！
質問 22
Which command sequence is required to reset Cisco Integrated Management Controller (IMC) of a Cisco UCS Server?
- A. scope cimc | reset | validate
- B. connect cimc | reset | commit
- C. connect cimc | reset | validate
- D. scope cimc | reset | commit-buffer
正解: D
質問 23
After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )
- A. RAID Controllers
- B. VIC Cards and Fiber Channel HBAs
- C. Cisco UCS Manager
- D. Cisco Fabric Interconnects
正解: B,D
質問 24
What three options should be verified, when you are able to connect to Cisco UCS Manager, but unable to open a KVM session to a blade? (Choose three)
- A. Confirm the KVM IP Address is added to the route table in Cisco UCS Manager
- B. Verify the KVM IP Address is on the same subnet as the Fabric Interconnect management address
- C. Confirm the IP Address assigned to the KVM is not a duplicate IP
- D. Verify the KVM IP Address is on the same ip subnet as the virtual machines
- E. Confirm the IP Address assigned to UCS Manager is the same as the KVM address
- F. Verify TCP port 2068 is not blocked by an ACL or Firewall
正解: A,C,F
質問 25
What are three possible causes of service profile association failure due to iSCSI configuration issue? (Choose three )
- A. Misconfigured iSCSI parameters
- B. Misconfigured LUN. LUN masking
- C. Improperly assigned iSCSI Class of Service
- D. Inappropriate network configuration
- E. iSCSI Target out of configured range of services
- F. Wrong WWNN
正解: A,D,E
質問 26
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?
- A. Cisco UCS Manager
- B. Cisco Data Management Engine
- C. Cisco Finite State Machine
- D. Cisco Application Gateways
正解: B
解説:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html
質問 27
When it comes to pinning vNIC traffic from a UCS Server to the Fabric Interconnect uplink what configuration can you perform?
- A. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
- B. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- C. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- D. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the same Fabric Interconnect
- E. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
正解: A
質問 28
In Cisco UCS, there are several interfaces involved on the packet path from the vNIC through the adapter, IOM to finally reach Pi Which is the order of those interfaces, starting from the vNIC?
- A. HIF. SIF, VIF, UIF NIF
- B. VIF, UIF, HIF, NIF SIF
- C. VIF, UIF, HIF, SIR NIF
- D. HIF. NIF, UIF, VIF SIF
正解: C
質問 29
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )
- A. Compatible UCS 6200 or 6300 Fabric Interconnects
- B. Compatible UCS VIC adapter installed via the server's PCIe or MLOM slot
- C. Compatible Cisco UCS Manager version
- D. Cisco Management Controller
- E. Compatible Cisco Nexus Fabric Extenders
正解: A,B
質問 30
Which two formats can be configured for Cisco's Call Home email message? (Choose two )
- A. Full text
- B. XML
- C. JSON
- D. CSV
正解: A,B
解説:
Call Home Message Formats The Call Home feature offers the following message formats: * Short Text - Suitable for pagers or printed reports. * Plain Text - Full formatted message information suitable for human reading. * XML - Matching readable format using Extensible Markup Language (XML) and Adaptive Markup Language (AML) document type definitions (DTDs). The XML format enables communication with the Cisco TAC. For user-defined destination profiles, the format options are long-text, short-text, or XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed.
Reference:
http://www.audentia-gestion.fr/cisco/smart-call-home-feature-guide-1611.pdf
質問 31
An overvoltage condition has occurred on a UCS server However the Cisco IMC System Event Log (SEL) file is full What is the resulting fault logging action?
- A. The overvoltage condition event will not be recorded in the SEL.
- B. The newest entry in the SEL will be overwritten by the overvoltage condition event.
- C. The SEL is not used to record server related events, such as overvoltage conditions.
- D. The oldest entry in the SEL will be overwritten by the overvoltage condition event
正解: A
質問 32
Which are two Application Gateways primary roles? (Choose two )
- A. Manage configuration changes made with UCS Manager
- B. Automate updates to the XML Database
- C. Communicate with end points and report their health and state
- D. Manage configuration changes during FSM transitions
- E. Communicate with virtual machines and report health and state
正解: B,D
質問 33
What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?
Check the HCL
- A. No need to do anything Drivers are automatically installed for you
- B. No Drivers are needed in a UCS environment
- C. Apply the device driver update to the devices
- D. Test device driver compatibility
正解: D
質問 34
When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?
- A. Enable Quiet Boot on the Server's Service Profile
- B. Enable Quiet Boot on the Server's BIOS
- C. Restart the Server
- D. Disable Fast Boot on the Server's Service Profile
- E. Disable Fast Boot on the Server's BIOS
正解: A
質問 35
When troubleshooting a LAN connectivity issue, you notice a failed uplink from the Cisco UCS Fabric Interconnects to the upstream LAN switch. What two could be causing the issue? (Choose two )
- A. A port channel mismatch between the Fabric Interconnects and the upstream LAN switch
- B. Misconfigured VLAN on the failed uplink
- C. Misconfigured QoS parameters on the failed uplink
- D. A port speed configuration mismatch between the Fabric Interconnects and the upstream LAN switch
- E. A SFP Type mismatch between the Fabric Interconnects and the upstream LAN switch
正解: A,C
質問 36
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )
- A. Web Access
- B. In-band Access
- C. Out-of-Band Access
- D. SNMP
- E. XML API Access
正解: B,E
質問 37
You are in the process of upgrading your UCS M3 Server to a newer UCS M4 Server. You associate the Service Profile to the new UCS Server, but it fails to boot You suspect of a failed boot hard drive. You check your RAID1 Boot LUN in UCS Manager, but see no error messages What could be causing the issue?
- A. A misconfiguration on the Service Profile Local Disk Policy
- B. The newer Cisco UCS M4 Server is using flash drives, not hard drives
- C. A misconfiguration on the Service Profile Local Boot Policy
- D. The newer Cisco UCS M4 Server is using disks of larger capacity than the previous UCS M3 Server
正解: B
質問 38
......
最新 [2022年01月] 効果的な学習法で試験合格できる500-920：https://jp.fast2test.com/500-920-premium-file.html