[2022年01月]更新のNokia BL0-200問題集合格率を上げるならBL0-200試験問題集
あなたのゴールを成し遂げるための問題集！あなたのNokia Bell Labs End-to-End 5G Networking Examの試験準備を合格するために実際のNokia BL0-200問題集をおすすめします
質問 14
When is a non-standalone deployment needed?
- A. When you need 4G RAN to provide all 5G services
- B. When you need to have interworking between 4G and 5G core
- C. When you need 56 RAN to provide all 5G services
- D. When deploying 5G RAN but want to use 4G core
正解: A
質問 15
Which is NOT one of the main features of SDN?
- A. Separation between hardware and control plane
- B. Flexible and scalable architecture
- C. Allows the operator to adjust the network offline
- D. Traffic optimization
正解: A
質問 16
In which usage case Is local UPF deployment most important?
- A. IoT
- B. URLLC
- C. eMBB
- D. LTE+5GD55
正解: B
質問 17
Youact as a consultant for a multisite company. They want to implement 5G coverage and are currently looking for a Cloud solution. Due to financial constraints they don't want to hire any new staff. What Cloud solution will you propose?
- A. Private Cloud
- B. Network as a service.
- C. Platform as a service
- D. Infrastructure as a service
正解: C
質問 18
Which 3GPP Release 15 deployment option features an only LTE Network {RAN and Core)?
- A. Option 2
- B. Option 4
- C. Option 3
- D. Option 1
正解: A
質問 19
Which of the following is NOT a valid method to route the data to the destination during roaming?
- A. Home-routed Roaming Architecture
- B. None of the above
- C. ITE-bypass Roaming Architecture
- D. Local Break-out Roaming Architecture
正解: A
質問 20
Why Is beamforming coverage better for 5G compared to 4G?
- A. Beam sweeping SSB
- B. Higher frequency deployments
- C. Lower frequency deployments
- D. Better uplink coverage
正解: C
質問 21
What is the typical maximum distance of the fronthaul?
- A. up to 30 km
- B. up to 10 km
- C. up to 5 km
- D. up to 50 km
正解: B
質問 22
The concept of dividing the carrier into smaller segments is integral to which 5G capability?
- A. Dynamic Spectrum Sharing
- B. Multi Connectivity
- C. Bandwidth Part
- D. Network Slicing
正解: D
質問 23
Which transmission principle is used by eCPRI?
- A. Packet based
- B. Frequency based
- C. Cell based
- D. Synchronous
正解: A
質問 24
What is the purpose of a RAN Intelligent Controller?
- A. Platform to use AI/ML tools to enable services provided by applications
- B. It is a suite of SON applications to improve network performance
- C. RAN domain management
正解: B
質問 25
In a closed loop automatic fault mitigation, which service determines the root cause?
- A. Domain intelligence
- B. Domain control
- C. Domain analytics
- D. Domain data collection
正解: D
質問 26
Select the correct statement regarding SDN:
- A. SDN allows the separation of control and user traffic
- B. SON doesn't allow the use of Multivendor/Open API
- C. SDN allows to access data directly in the hardware
- D. SDN allow the decentralization of the network control
正解: A
質問 27
What Information is NOT exchanged during Session Establishment?
- A. Final P-NSSAI
- B. PDU Session ID
- C. QFI
- D. Session AMBR
正解: A
質問 28
In an Option 2 deployment, when additional capacity is required, what is the best solution?
- A. Carrier aggregation for 5G cells
- B. Carrier aggregation for 4G cells
- C. Dual connectivity
- D. Dynamic spectrum sharing
正解: D
質問 29
Which of the following are the functions of each Slice Management orchestrator?
- A. Automation
- B. Monitoring
- C. All of the above
- D. Optimization
正解: C
質問 30
Which network element performs the AMF selection?
- A. UDR
- B. UPE
- C. SMF
- D. RAN Node
正解: D
質問 31
Frequency synchronization can be distributed via Synchronous Ethernet. Please select true statement for SynchE.
- A. The stability of the recovered frequency depends on the network load
- B. SynchE is a layer 2 - link layer
- C. SynchE is transported in OTN frames
- D. SynchE must be supported at all intermediate nodes on the synchronization path
正解: C
質問 32
......
100% 無料BL0-200デモ-試し読み [PDF]、今すぐゲットせよ：https://drive.google.com/open?id=1NR0dRe6gWTo_jtizfRXbSBs3nxbswIdd
正確でかつ完璧 アンサーはまるでリアル試験問題：https://jp.fast2test.com/BL0-200-premium-file.html