100%無料VCS-284試験問題集リアルVeritas NetBackup問題集309解答を掴み取れ！ [Q127-Q150]

100%無料VCS-284試験問題集リアルVeritas NetBackup問題集309解答を掴み取れ！

あなたを余裕でVCS-284試験合格させます！100%試験高合格率保証 [2025]

質問 # 127
An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes. How can the administrator modify the time between backup attempts?
Response:

• A. modify the Schedule backup attempts host property
• B. modify the Take checkpoints every value in the backup policy
• C. modify the Policy update interval host property
• D. modify the Job retry delay host property

正解：A

質問 # 128
Which statement or statements describe the Scratch volume pool?
Response:

• A. The Scratch volume pool is an optional volume pool.
• B. The Scratch pool donates volumes to pools that need additional available volumes.
• C. There is one Scratch volume pool per NetBackup domain.
• D. All of the above.

正解：D

質問 # 129
How is the expiration date of an imported image determined during an import?
Response:

• A. by using the import date plus seven years.
• B. by using the original backup date plus the original retention.
• C. by using the import date plus the original retention.
• D. by using the original backup date plus infinity.

正解：A

質問 # 130
Which step must an administrator complete prior to configuring a new NBU-Catalog policy?
Response:

• A. set an encryption passphrase for disaster recovery packages.
• B. log in as the Systems Administrator.
• C. set up a Vault Policy for catalog backup.
• D. create an email alias for recovery purposes.

正解：D

質問 # 131
A BasicDisk storage unit is 500 GB and is running out of space. The disk and file system is resized to 800 GB. What must occur to use this new disk space?
Response:

• A. run nbdevquery to refresh the disk inventory
• B. restart the Disk Manager (bpdm) process
• C. initiate a backup operation to the BasicDisk storage unit
• D. run bpstsinfo to update the high water mark

正解：B

質問 # 132
An administrator initiated a manual backup of clientA on master1. The backup failed with the message: client is offline(1000) Which Host Properties setting should an administrator modify to resolve this issue?
Response:

• A. Master Servers > master1 > Client Attributes > clientA > General > Offline until
• B. Master Servers > master1 > Client Attributes > clientA > Connect Options > Offline until
• C. Clients > clientA > Universal Settings > Offline until
• D. Clients > clientA > Windows Client > Client Settings > Offline until

正解：C

質問 # 133
Which two options are available to an administrator to bring the Media Server Deduplication Pool (MSDP) catalog back online in the case of a hardware problem that caused corruption?
(Select two.)
Response:

• A. restore the MSDP catalog from an MSDP catalog shadow copy
• B. repair the MSDP catalog using the crchk tool
• C. recover the MSDP catalog from a MSDP catalog backup
• D. repair the MSDP catalog using the recoverCR tool
• E. restore the MSDP catalog from the NetBackup catalog backup

正解：A、C

質問 # 134
An administrator needs to recover the NetBackup master server catalog at a disaster recovery site, but the DR files are unavailable. Which command should the administrator use to recreate the DR file?
Response:

• A. cat_import
• B. bpimport
• C. bprecrover
• D. nbcatsync

正解：B

質問 # 135
An administrator is creating a Standard policy with the option ''Use Accelerator'' to back up files on a Linux server. Which two options are disabled by default in this type of policy?
Response:

• A. Encrypt
• B. Collect true image restore information
• C. Allow multiple data streams
• D. Compress
• E. Cross mount points

正解：A、D

質問 # 136
The Master Server catalog is being recovered to a new server. The administrator receives the message displayed below:
Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database.
Host - train1 MediaID - GBP847
Barcode - GBP847S1
In the Administration Console, barcode GBP847S1 is associated with media ID P847S1. How should the administrator proceed?
Response:

• A. delete the tape > set the media ID generation rule accordingly > re-inventory the library > run recovery
• B. use bplabel to change the media ID > re-inventory the library > perform recovery
• C. delete the tape > set the barcode rule accordingly > re-inventory the library > run recovery
• D. use nbdelete to remove the media id > use vmadd to re-add the media id > re-inventory the library > perform recovery

正解：A

質問 # 137
Weekly full backups run for clientA on master1 using a storage unit that belongs to media1. The administrator is required to retain clientA's full backups for a period of four months. When the administrator modifies the Full schedule, four months is missing from the selection list.
Where should the administrator add the four-month retention period under Host Properties?
Response:

• A. Master Servers > master1 > Retention Periods
• B. Media Servers > media1 > Retention Periods
• C. Master Servers > master1 > Global Attributes
• D. Clients > clientA > Global Attributes

正解：D

質問 # 138
Refer to the exhibit.

The following storage lifecycle policy was used to back up data from a client. All duplication jobs have completed, and none of the backups have expired. How should an administrator restore data from the tape using NetBackup?
Response:

• A. from the NetBackup Administration Console, promote copy 3 to the primary copy
• B. from the NetBackup Administration Console, promote copy 1 to the primary copy
• C. from the NetBackup Administration Console, promote copy 2 to the primary copy
• D. from the BAR console, select the tape backup to restore from

正解：C

質問 # 139
The nbemmcmd -getemmserver command on a new NetBackup media server produces the error displayed below. Failed to initialize EMM connection. Which two steps are used to diagnose the issue?
(Select two.)
Response:

• A. remove the media server name from the additional servers list on the master server
• B. run the bpclntcmd -hn command on the master server to confirm that the master server was able to resolve its own hostname
• C. telnet from the master server to the media server,s VNETD port
• D. verify that the nbemm and pbx_exchange daemons/services are running on the master server
• E. verify that network access to the master server is available

正解：B、C

質問 # 140
Which action does the DISALLOW_SERVER_FILE_WRITES in a Client's configuration perform?
Response:

• A. It prohibits the client from writing a backup without asking for permission.
• B. It blocks restores form being initiated from the master server.
• C. It prohibits the administrator from performing a client restore.
• D. It blocks the administrator from redirecting restores to another client.

正解：C

質問 # 141
Which two methods are used to automate duplication in NetBackup 7.7?
(Select two.)
Response:

• A. OpenStorage API
• B. OpsCenter
• C. Storage Lifecycle Policies
• D. bpduplicate command
• E. NetBackup Vault

正解：C、E

質問 # 142
By using the robot front panel, an operator ejects media 000001 from robot TLD(1) and inserts it into robot TLD(2). Neither robot has a barcode reader.
Which two actions should the administrator in the administration console to update the EMM database accordingly and show media 000001 at the new location?
(Select two.)
Response:

• A. run a robot inventory on both robots
• B. move media 000001 from standalone to robot 2
• C. label media 000001
• D. change the volume pool in media 000001 properties
• E. move media 000001 to standalone

正解：A、E

質問 # 143
Which status code applies only to disk storage units?
Response:

• A. 0
• B. 1
• C. 2
• D. 3

正解：A

質問 # 144
A tape containing valid backup images is damaged and is unusable. The administrator removes the tape from the robot to avoid trying to use it again for backup or restore operations.
Which two tasks should the administrator perform next?
(Select two.)
Response:

• A. label the damaged tape
• B. delete the damaged tape
• C. move the damaged tape to the scratch pool
• D. expire all the backup images located on the damaged tape
• E. change the volume group for the damaged tape

正解：C、E

質問 # 145
How can an administrator copy an existing backup image of client1.example.com from an AdvancedDisk storage unit to a Media Server Deduplication Pool (MSDP)?
Response:

• A. run bpimport with the source and the destination storage unit
• B. run nbreplicate with the backup ID and the destination storage unit
• C. run bpduplicate with the backup ID and the destination storage unit
• D. create a Storage Lifecycle Policy that contains a duplication to the MSDP pool

正解：C

質問 # 146
Which NetBackup components can be updated with VxUpdate?
Response:

• A. clients
• B. media servers
• C. media servers and clients
• D. media servers and master servers

正解：A

質問 # 147
What should an administrator do to enable backups to span multiple BasicDisk storage units?
Response:

• A. confirm that a load balancing storage unit is selected at the group level
• B. configure a storage unit group and add BasicDisk storage units from multiple Media Servers
• C. configure a storage unit group that consists only of disk storage units defined on a single Media Server
• D. select Storage Units > Storage Unit > Allow backup to span disks

正解：B

質問 # 148
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?
Response:

• A. create a full backup schedule with Accelerator forced rescan enabled
• B. create a differential or cumulative incremental backup schedule
• C. enable Collect true image restore information with move detection
• D. select a backup destination that supports synthetic backups

正解：D

質問 # 149
Which backup storage is unsupported with media server load balancing?
Response:

• A. BasicDisk
• B. Media Manager storage
• C. Media Server Deduplication Pool
• D. AdvancedDisk

正解：A

質問 # 150
......

学習材料は有効VCS-284効率的問題集：https://jp.fast2test.com/VCS-284-premium-file.html