100%無料H35-561-ENU試験問題集リアルHCNP-LTE RNP & RNO問題集62解答を掴み取れ！
あなたを余裕でH35-561-ENU試験合格させます！100%試験高合格率保証 [2022]
質問 10
Which of the following options is the most important basis for frequency domain resource scheduling?
- A. CQI
- B. UE capabilities
- C. Cache data volume
- D. System bandwidth
正解: A
質問 11
Which of the following processes belongs to NAS ESM?
- A. Attach
- B. Authentication
- C. Tracking area update
- D. EPS bearer setup
正解: D
質問 12
Which of the following modulation method can LTE system support? (Multiple choice)
- A. GMSK
- B. 16QAM
- C. 64QAM
- D. QPSK
正解: B,C,D
質問 13
Which of the following descriptions are wrong? (Multiple choice)
- A. eSRVCC optimizes the near-end session update process, and the media switch point is changed to the called side network element, which shortens the switch duration.
- B. In a network that supports LTE VoIP, if dual AP configuration is used, only one default EPS bearer will be established each time the power is registered.
- C. In order to support VOLTE in an LTE network, IMS and PCRF network elements need to be configured.
- D. EPS bearer is a LTE network QoS basic management unit, if necessary in LTE network to provide different QoS service, it is necessary to establish different EPS bearers
正解: A,B
質問 14
After receiving the air interface switch command, the UE initiates the reestablishment and receives the message that the rebuild is rejected. What are the possible reasons for the failure of the entire process? (Multiple choice)
- A. Reconstructing the target cell without context information of the UE
- B. The reconstruction target cell may be a third-party cell
- C. The source cell initiates a handover cancellation process.
- D. Switching target cell channel fluctuations cause random-access failure
正解: A,B,D
質問 15
In the LTE system, which of the following sequences is generated by the preamble sequence?
- A. ZC sequence
- B. midamble code
- C. M sequence
正解: A
質問 16
Which power in the physical channel determines the average power of the uplink channel?
- A. One code channel
- B. One subframe
- C. One field
- D. One SC-FDMA symbol
正解: D
質問 17
Which of the following statements is true about the LTE protocol architecture? (Multiple choice)
- A. The role of the logical channel is to characterize the type of message being transmitted.
- B. The physical layer provides data transmission services to the upper layers, which can be accessed through the MAC sublayer and using the transport channel.
- C. MAC provides different logical channels to Layer 2 Radio Link Control (RLC) sublayer
- D. The role of the transport channel is to describe how information is transmitted over the wireless interface.
正解: A,B,C,D
質問 18
What are the differences between FDD and TDD in PRACH channel design? (Multiple choice)
- A. The short RACH time domain resource is on the UpPTS and shares the UpPTS frequency domain resource with Sounding.
- B. frequency domain occupies 6 RBs, the number of symbols occupied by the time domain is determined by the radius of the supported access
- C. TDD supports short RACH (format4)
- D. Because there are few TDD uplink subframes, multiple RACH channels in the same subframe are allowed.
正解: A,C,D
質問 19
Regarding the switching indicator statistics, which of the following descriptions is wrong?
- A. Switching out the indicator statistics point in the source cell
- B. Different system switching between TDD and FDD cells
- C. Switching into the indicator statistics point on the target side
- D. The UE reconstruction success of the handover failure is successful.
正解: B
質問 20
In which step in the contention-based random-access process is to set an additional power offset?
- A. Step 4: Send a competition mode resolution message
- B. Step 2: Random Access Response
- C. Step 1: Transfer the preamble sequence
- D. Step 3: Send a Layer 2/Layer 3 message
正解: C
質問 21
RSRP is the sum of the received power of all REs of full bandwidth.
- A. True
- B. False
正解: B
質問 22
What are the measurement configuration messages of the E-UTRAN to UTRAN system handover based on coverage? (multiple choice)
- A. Measuring object
- B. Measure GAP configuration
- C. Measuring time
- D. UTRAN FDD filter coefficient
正解: A,B,D
質問 23
Which of the following events is the basis for LTE synchronous frequency switching?
- A. A1
- B. A3
- C. B1
- D. A2
正解: B
質問 24
Which S1 message is used to trigger the CSFB service?
- A. Initial UE message
- B. Initial UE context establishment response
- C. Extended service request
- D. Service request
正解: C
質問 25
When the UE is powered on or enters the coverage area from the uncovered area, which of the following PLMNs is selected for registration?
- A. EHPLMN
- B. Last registered PLMN (RPLMN)
- C. According to PLMN in the file "the User Controlled PLMN Selector with Access Technology" which saved in USIM card
- D. HPLMN
正解: B
質問 26
......
学習材料は有効H35-561-ENU効率的問題集：https://jp.fast2test.com/H35-561-ENU-premium-file.html