良質なNS0-527のPDF問題集でNS0-527試験問題を試せます [Q92-Q111]

良質なNS0-527のPDF問題集でNS0-527試験問題を試せます

一番最新のNetwork Appliance NS0-527試験問題集PDF2023年更新

質問 92
You are using a MetroCluster configuration.
Which two Fibre Channel switch vendors are supported for backend replication? (Choose two.)

A. QLogic
B. Cisco
C. Brocade
D. ATTO Technology

正解: B,C

質問 93
You want to conserve disk space in your SnapVault destinations. You enablestorage efficiency on each of the secondary volumes.
Which two statements are true in this scenario? (Choose two.)

A. If storage efficiency is enabled on the primary volume, it will be preserved on the secondary volume.
B. Storage efficiency can be enabled on the secondary volume and SnapVault will manage the schedule.
C. Storage efficiency can beenabled on the secondary volume, but a manual schedule will need to be assigned.
D. SnapVault implicitly uses storage efficiency.

正解: A,B

質問 94
A client has a VMware vSphere environment with several MS SQLservers currently running that provides back-end Web services. You are asked to prepare a disaster recovery solution that would minimize downtime if any of these virtual machines become corrupted and unavailable.
Which solution will satisfy the requirement?

A. Use the NetApp SnapCenter software to take a consistent backup of the database and operating system, followed by another Snapshot copy of the virtual server.
B. Use the NetApp SnapCenter plug-in for VMware vSphere to take a complete backup of the entire virtual server that is hosting the database.
C. Use the NetApp SnapCenter software to take a complete backup of the entire virtual server that is hosting the database.
D. Use the NetApp Virtual Storage Console snapshot function to take a complete backup of the entire virtual server that is hosting the database.

正解: B

質問 95
A customer wants to enforce prompt tiering when the cooling threshold has been reached.
They want to do this even though the data may have been deleted or the data continues to exist in the primary file system.
In this scenario, which tiering policy should be used?

A. Snapshot-only
B. None
C. Backup
D. Auto

正解: D

質問 96
Acompany has a 4-node FAS9000 fabric MetroCluster cluster separated by 101 km. Site A has an unmirrored HDD aggregate. An FC-VI card fails in one of the nodes in site A and a switchover occurs.
Which statement is correct in this scenario?

A. The distance is not supported.
B. The aggregate is accessible using Site B's cluster.
C. Only SSD aggregates are accessible.
D. The aggregateis accessible using Site A's surviving node.

正解: B

質問 97
Your customer has issued the metrocluster heal command.
Which two statements are true regarding this command? (Choose two.)

A. The customer has to run the command twice.
B. The customer has one node in the site down and wants to heal the cluster.
C. The customer has replaced failed disks in one of the clusternodes.
D. The customer is preparing for a disaster recovery switchback.

正解: C,D

質問 98
You are running a NetApp AFF A220 cluster. Each node has one volume. You create Snapshot copies on both volumes every four hours and keep the copies for 30 days. You are running out of disk space and want to free up space.
In this scenario, what do you do?

A. Activate aggregate-background deduplication.
B. Add a disk shelf with NL-SAS HDDs.
C. Activate aggregate-inline deduplication.
D. Add a capacity tier and set the tiering policy tosnapshot-only.

正解: C

質問 99
You have a network outage that affects client access to site

A. Abort the SnapMirror relationship.
B. You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.
Which two steps must you perform first?
(Choose two.)
C. Delete the SnapMirror relationship.
D. Take the source volume offline.
E. Break the SnapMirror relationship.

正解: B,D

質問 100
A customer has just purchased a new 2-node AFF A220 cluster running ONTAP 9.7 and moved the older 4- node FAS2650 cluster running ONTAP 9.5 to an off-site location. They want to configure replication to the FAS2650 cluster for both disaster recovery and long-term archiving.
In thisscenario, how would the customer accomplish this task?

A. Upgrade the FAS2650 cluster to ONTAP 9.7, then configure SnapMirror with type TDP.
B. Leave the ONTAP versions, then configure SnapMirror with type XDP.
C. Downgrade the AFF A220 cluster to ONTAP 9.5, then configure SnapMirror with type XDP.
D. Leave the ONTAP versions, then configure SnapMirror with type DP.

正解: A

質問 101
Click the Exhibit button.

A customer wants to ensure that their volumes are protected. In ONTAP System Manager, under the Protectionsection, you see the screen that is shown in the exhibit. The company has an asynchronous mirror policy of less than a 60-minute lag.
Referring to the exhibit, which volume has a lag that exceeds the company policy?

A. svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_dest
B. svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_DR
C. svm_fabricpool:project_b -> svm_fabricpool:project_b_dest
D. svm_fabricpool:project_a -> svm_fabricpool:project_a_dest

正解: B

質問 102
You are asked to provide a solution that will allow a client to copy the data stored in a FlexVol volume to a remote tape system for archiving. You are using a cluster-aware backup application to perform this task.
Which three actions are required when you configure this solution for your client? (Choose three.)

A. Create a backup user account on the cluster.
B. Configure NDMP at the node level.
C. Configure a LIF for node-scoped NDMP.
D. Configure NDMP at the SVM level.
E. Configure multiple LIFs for SVM-scoped NDMP.

正解: A,B,C

質問 103
After manually implementing aSnapVault relationship between two volumes on two separate clusters, the primary Snapshot copies are working fine. The baseline has been transferred successfully. The relationship is shown as healthy and idle.
However, the updates are not taking place as scheduled on the secondary system.
What is causing the problem?

A. The SnapMirror policy schedule has not been enabled.
B. The SnapMirror access has not been configured.
C. The Snapshot copy label has not been set correctly in the used SnapMirror policy.
D. The cluster peering has not been set properly.

正解: C

質問 104
You have deployed a 4-node fabric MetroClusterconfiguration for cross-site disaster-recovery protection.
In this scenario, which two statements are correct for an automatic unplanned switchover (AUSO) operation? (Choose two.)

A. AUSO is triggered in the event of a complete site-wide failure to provide nondisruptive operations.
B. AUSO is triggered in the event of a site-wide switch failure to provide nondisruptive operations.
C. AUSO is triggered in the event of a site-wide controller failure to provide nondisruptive operations.
D. AUSO is enabled by default on a MetroCluster cluster.

正解: C,D

質問 105
You are the administrator of your company's ONTAP clusters. You are asked toprovide a disaster recovery solution between your primary AFF A400 cluster and your FAS2720 cluster with the highest possible availability at the lowest possible price.
In this scenario, which product will satisfy this requirement?

A. SnapMirror
B. MetroCluster
C. SVM-DR
D. SM-S

正解: B

質問 106
You have a NAS volume containing 100 GB of data and daily change rate of 10%. You want to keep seven daily Snapshot copies. What is the minimum size for the volume?

A. 110 GB
B. 170 GB
C. 100 GB
D. 220 GB

正解: B

質問 107
You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?

A. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.
B. Use SnapManager for Oracle to take the Snapshot copy backup.
C. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN.
D. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.

正解: D

質問 108
What are two reasons why thestatus of the SnapMirror relationship is showing ~Healthy: false~? (Choose two.)

A. A manual update has failed.
B. The lag time has exceeded the threshold.
C. It has missed a scheduled transfer.
D. A transfer operation is in progress.

正解: A,C

質問 109
You have two ONTAP clusters, cluster1 and cluster2. Cluster1 has an SVM serving SMB3 data and you want to protect it by replicating it to cluster2 using SVM DR. The source and destination subnets are identical. You want to retain the CIFS server security of the SVM at the destination site.
In this scenario, which three steps would you take to configure the SVM DR relationship? (Choose three.)

A. Create a CIFS server on the destination SVM.
B. Configure the network for data access on the destination SVM.
C. Create the SnapMirror relationship with the id-preserve option set to true.
D. Create the destination SVM with the dp-destination subtype.
E. Initialize the SnapMirror relationship.

正解: A,B,C

質問 110
You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.
In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?

A. Expand the source FlexGroup nondisruptively, and update the SnapMirror.
B. Offline the source FlexGroup, add additional volumes, bring it online, and update the SnapMirror.
C. Break the SnapMirror relationship, expand the source FlexGroup, and update the SnapMirror.
D. Break the SnapMirror relationship, expand the source FlexGroup, and re-baseline the SnapMirror.

正解: D

質問 111
......

100%無料NCIE-DP NS0-527問題集PDFお試しサンプル認定ガイドカバー率：https://jp.fast2test.com/NS0-527-premium-file.html

PDF試験材料は2023年最新の実際に出るNS0-527問題集：https://drive.google.com/open?id=14JkyRKsvD32Bjs1qPKKYWO6jrCTzHB9V