無料HPE0-V26サンプル問題で100%カバー率のリアル試験問題（更新された63問あります)
今すぐダウンロード！リアルHP HPE0-V26試験問題集テストエンジン試験問題
質問 # 26
Match the HPE storage products to their use case.
正解：
解説：
Explanation
HPE MSA2062 -> Provides storage for two HPE ProLiant DL380 Gen10 servers in a branch office1 HPE SimpliVity -> Enterprise HCI with integrated compute storage and data protection2 HPE StoreEver LTO 9 Ultruim 45000 External Tape Drive -> Secures backup data with an air-gap separation3 HPE StoreOnce 3660
-> Provides a disk-based backup functionality with efficient deduplication
質問 # 27
You need a tool on a SAN Fabric that Will deliver protocol diagnostic, fabric configuration validation With SPOCK, and assess the health of physical ports with self-healing and fabric monitoring.
It must perform end-to-end diagnostics while using predefined templates to reduce configuration errors.
Which diagnostic tool should be used?
- A. Off-Line Diagnostics
- B. On-Line Diagnostics
- C. HPE InfoSight
- D. Network Orchestrator
正解：C
解説：
Explanation
According to the HPE website, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also provide protocol diagnostics, configuration validation with SPOCK, and assess the health of physical ports with self-healing and fabric monitoring1. It can also perform end-to-end diagnostics while using predefined templates to reduce configuration errors1
質問 # 28
Match the RAID level to the number of drive failures an array can handle without losing data. (Each option may be used once, more than once, or not at all.)
正解：
解説：
* RAID 1: any single drive
* RAID 1 ADM: any two drives
* RAID 5: any single drive
* RAID 6: any two drives
* RAID 1: This is a level of RAID that uses mirroring to create an exact copy of data on two or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drive is still functional.
* RAID 1 ADM: This is a level of RAID that uses advanced data mirroring to create two copies of data on three disks. It can tolerate the failure of any two drives without losing data, as long as the third drive is still functional.
* RAID 5: This is a level of RAID that uses striping with parity to distribute data and parity information across three or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drives can reconstruct the data from the parity information.
* RAID 6: This is a level of RAID that uses striping with double parity to distribute data and two sets of parity information across four or more disks. It can tolerate the failure of any two drives without losing data, as long as the other drives can reconstruct the data from the double parity information.
質問 # 29
Your customer has run out of storage on their Virtual environment.
How does migrating to HPE GreenLake help this customer?
- A. by implementing a reserve level to ensure there is always storage available
- B. by allowing the customer to over-provision their storage
- C. by automatically ordering more storage when capacity levels reach 90%
- D. by enabling the customer to use an installed butter and only pay for what they use
正解：D
解説：
Explanation
HPE GreenLake for storage is a storage-as-a-service solution that provides a cloud-like experience for on-premises storage. The solution offers:
* Workload-optimized data services for file, block, backup, and disaster recovery
* A cloud-based management console for simplified operations and provisioning
* A consumption-based model that aligns costs with usage
* A buffer capacity that is installed but not activated until needed
* A pay-per-use billing that only charges for the capacity used above the reserve level By migrating to HPE GreenLake for storage, the customer can avoid running out of storage on their virtual environment by using the buffer capacity as needed and only paying for what they use. The customer can also benefit from the flexibility, scalability, and performance of the storage services offered by HPE GreenLake.
質問 # 30
A customer with a new HPE MSA 2060 Gen6 array wants to ensure that best practices were followed when they installed and set it up.
Which HPE product will meet the customer requirements?
- A. HPE InfoSight
- B. HPE SMU v4 Health check
- C. HPE MSA Health Check Tool
- D. HPE OneView Standard
正解：C
解説：
Explanation
HPE MSA Health Check Tool is a web-based tool that provides a comprehensive health check of an HPE MSA 1060/2060/2062 storage array. The tool analyzes the array configuration, performance, and logs and provides a detailed report with recommendations based on HPE best practices. The tool can also generate a support ticket if any issues are detected.
The HPE MSA Health Check Tool is available for download from the HPE Support Center website1. The tool requires an active warranty or support contract for the array.
質問 # 31
Your customer has a VMware vSphere cluster that needs to be upgraded to a SimpliVity Solution. you need to collect data to recommend the correct SimpliVity Sizing.
What tool will provide this Information?
- A. HPE NinjaSTARS
- B. HPE Cloudphysics
- C. HPE dHCI Sizer
- D. HPE Storage Sizing Tool
正解：B
解説：
Explanation
HPE Cloudphysics is a cloud-based assessment tool that helps customers plan and optimize their VMware vSphere environments. The tool can collect data from the customer's existing environment, such as configuration, performance, capacity, and utilization, and provide insights and recommendations for migrating to HPE SimpliVity. The tool can also compare the costs and benefits of different migration scenarios and generate a detailed report with a bill of materials.
質問 # 32
Review the exhibit.
Click where you can access intelligent provisioning.
正解：
解説：
Explanation
F10 Save
質問 # 33
You are explaining hardware health monitoring features Of an HPE ProLiant DL380 Geno Plus server. you need to snow how historical events can be viewed, including fan and power supply failures.
Where can this information be found?
- A. Data Services Cloud Console
- B. Integrated Management Log
- C. ILO Event
- D. HPE Data Ops Manager
正解：B
解説：
Explanation
Integrated Management Log (IML) is a feature that records hardware events such as fan and power supply failures on HPE ProLiant servers. The IML can be viewed through various methods, such as the iLO web interface, the iLO RESTful API, or the Smart Storage Administrator (SSA). The IML provides historical information about the server's hardware health and helps with troubleshooting and analysis.
質問 # 34
Which new feature is provided by the Storage Management utility v4?
- A. autonomic
- B. easy switching of active firmware versions
- C. automatic file classification
- D. automatic installation of new recommended firmware versions
正解：B
解説：
Explanation
one of the topics covered in the module 4 of the Implementing HPE MSA Storage Solutions course is
"Explain the firmware update process on MSA". This suggests that the firmware update is a maintenance task that can be performed with the Storage Management utility v4.
質問 # 35
A customer who is new to HPE wants to refresh the hardware infrastructure for their VMware environment.
Before meeting the customer, you need to perform an assessment to get a better of their environment Which HPE tool should you use?
- A. CloudPhysics
- B. InfoSight
- C. OneView
- D. GreenLake QuiCk Quote
正解：A
解説：
Explanation
CloudPhysics is a tool that provides a comprehensive assessment of VMware environments and helps identify opportunities for optimization and modernization. CloudPhysics can also generate a ready-to-order bill of materials for HPE solutions based on the customer's workload requirements.
The other options do not seem to be suitable for performing an assessment of a VMware environment. OneView is a tool for managing HPE servers, storage, and networking2. GreenLake Quick Quote is a tool for creating quotes for HPE GreenLake services3. InfoSight is a tool for monitoring and managing HPE storage systems.
質問 # 36
What value does deploying workloads on HPE GreenLake provide? (Select two.)
- A. Single-pane management interface with OneView for storage and server management
- B. Pay for resources consumed
- C. capacity ahead Of demand
- D. Capacity on demand licensing model
- E. Foundation Care support
正解：B、C
解説：
Explanation
HPE GreenLake is a cloud services platform that delivers on-demand capacity and planning, combining the agility and economics of the public cloud with the security and performance of on-premises IT. Some of the benefits of HPE GreenLake include:
* Pay for resources consumed: HPE GreenLake offers a pay-per-use model that aligns costs with actual usage, reducing overprovisioning and improving cash flow. Customers can also scale up or down as needed and only pay for what they use.
* Capacity ahead of demand: HPE GreenLake provides customers with buffer capacity that is ready to use in minutes, not months, enabling them to respond quickly to changing business needs. Customers can also access a range of cloud services from HPE and partners through a self-service portal.
質問 # 37
your customer is using HPE Infosight in their environment containing ProLiant and MSA systems.
which product supports automatic case creation through InfoSight?
- A. MSA 2062
- B. MSA2040
- C. proLiant DL560 Gen10
- D. ProLiant DL120 G7
正解：C
解説：
Explanation
According to the HPE website, HPE InfoSight supports automatic case creation for HPE ProLiant servers that are connected to HPE InfoSight through HPE Integrated Lights-Out (iLO) Amplifier Pack1. The ProLiant DL560 Gen10 is one of the supported servers that can benefit from this feature
質問 # 38
your customer has a small once with five employees and needs a tower server tor a File & print workload.
Which server series should they use?
- A. DL series
- B. Apollo Series
- C. ML series
- D. Synergy Series
正解：C
質問 # 39
What is a feature Of the MSA 2060 storage array?
- A. Supports a mixture Of both SSD and HDDs within the same system
- B. Gains Al and machine learning operational through InfoSight
- C. Deduplication and compression are non-intrusive and in-line
- D. Encryption can be enabled by adding 2 self-encrypted drives through Full Disk Encryptbn
正解：A
解説：
Explanation
This is because the HPE MSA 2060 Storage solution supports a mixture of 3.5 inch LFF and 2.5 inch SFF expansion enclosures for a maximum of 9 enclosures (10 total including the array). You can start small and scale as needed with any combination of SSDs, Enterprise SAS or MidLine SAS HDDs12.
質問 # 40
your customer has standardized on the AMD platform and asks tor a new I IJ server.
Which server should you recommend?
- A. DL360
- B. DL365
- C. DL560
- D. DL385
正解：D
解説：
Explanation
According to HPE, this server offers the 2nd generation AMD EPYC 7000 Series processor delivering up to
2X the performance of the prior generation1. It also provides built-in security and flexibility for key applications such as virtualization, software-defined storage (SDS), and High-Performance Compute (HPC)1.
質問 # 41
Your customer needs a server a maximum Of two processors that will provide high performance, manageability, expansion, and security.
Which server should you recommend?
- A. DL380
- B. DL20
- C. DL560
- D. DL110
正解：A
解説：
Explanation
HPE ProLiant DL380 Gen10 server is a versatile 2U rack server that delivers world-class performance and security for a wide range of workloads. The server supports up to two Intel Xeon Scalable processors with up to 28 cores per processor and up to 3 TB of memory. The server also offers a range of management, expansion, and security features, such as:
* HPE iLO 5 software for remote management and monitoring
* HPE Smart Array controllers for RAID configuration and data protection
* HPE SmartMemory for enhanced performance and reliability
* HPE Flexible Slot power supplies for efficiency and redundancy
* HPE FlexibleLOM adapters for network connectivity options
* HPE Persistent Memory for fast data access and analytics
* HPE Secure Boot and Secure Start for firmware validation and protection
質問 # 42
An RFP states that the database server requires two processors out must De available to scale to four inside a
2U chassis.
Which server would satisfy the customer requirements?
- A. DL560 Gen10 server
- B. DL580 Gen10 server
- C. TWO DL380 Gen 10 servers
- D. Two DL360 Gen10 servers
正解：A
解説：
Explanation
This is because the HPE ProLiant DL560 Gen10 server is a 2U rack server that supports up to four Intel Xeon Scalable processors with up to 48 cores per processor. It also supports up to 6 TB of memory and up to 12 LFF or 24 SFF drives.1 It can satisfy the customer requirements of having two processors and scaling to four inside a 2U chassis.
質問 # 43
your customer needs to capture, store, manage, and analyze a dataset that exceeds capacity of typical database software tools.
What storage technology should you propose to meet their needs?
- A. Big Data
- B. File Storage
- C. Block Storage
- D. Containers
正解：A
解説：
Explanation
According to Simplilearn, big data storage is a new technology that allows you to store large amounts of data that exceed the capacity of typical database software tools1. Big data storage can handle various types of data, such as structured, unstructured, or semi-structured data, and provide fast and scalable access to it1.
質問 # 44
Match each HPE tool with its business value.
正解：
解説：
* HPE Product Bulletin: Aides with the purchase, sale, and support of HPE solutions by providing technical overviews and specifications.
* HPE CloudPhysics: Provides data-driven insights to improve IT performance, ROI, and data protection through analysis of IT metadata.
* Solution Sales Enablement Tool: Provides curated information about HPE strategy and solutions as well as sales, marketing, and technical information aligned to specific solutions.
* HPE Seismic: Accurately size and efficiently deliver world-class solutions on HPE GreenLake Lighthouse, which powers HPE GreenLake Cloud services and HPE infrastructure.
* HPE Product Bulletin: https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c04123144
* HPE CloudPhysics: https://www.hpe.com/us/en/storage/cloudphysics.html
* Solution Sales Enablement Tool: https://sset.ext.hpe.com/
* HPE Seismic:
https://www.hpe.com/us/en/newsroom/blog-post/2021/02/hpe-reimagines-customer-and-partner-experienc
質問 # 45
A customer wants to set up a site-to-site replication using Fibre Channel to a Site that is 10 Kilometers away.
What cable must be used to achieve this?
- A. Flex fiber cable
- B. Multimode fiber optic cable
- C. Single-mode fiber optic cable
- D. Polymer optical fiber cable
正解：C
解説：
Explanation
* https://en.wikipedia.org/wiki/Fibre_Channel
* https://www.techtarget.com/searchnetworking/tutorial/Network-cable-history-and-fundamentals-Cabling-t
* https://fibrechannel.org/wp-content/uploads/2016/04/Fibre_Channel_Connectivity_White_Paper_04-06-16 This is because single-mode fiber optic cable has a small core diameter that allows only one mode of light to propagate. This reduces signal attenuation and enables longer transmission distances than multimode fiber optic cable, which has a larger core diameter that allows multiple modes of light to propagate. Single-mode fiber optic cable can support distances up to 40 kilometers for Fibre Channel applications.
質問 # 46
A customer needs Help setting up their bootable logical drive/volume, checking online drive firmware activation readiness, and managing device identification LEDS What HPE tool should you recommend?
- A. Service pack for ProLiant
- B. Integrated Smart Update Tool
- C. HPE OneView
- D. smart storage Administrator
正解：D
解説：
Explanation
the HPE Smart Storage Administrator (SSA) is a web-based application that helps you configure, manage, diagnose, and monitor HPE ProLiant Smart Array Controllers and now other storage devices as well, such as host bus adapters (HBAs), HPE Storage controllers, and future devices such as SCSI Express drives, and SAS switch devices.
Some of the features of the HPE SSA include:
* Creating a bootable logical drive
* Checking online drive firmware activation readiness
* Managing device identification LEDs
* Configuring drive erase
* Creating and managing arrays and logical drives
* Viewing controller and drive status and health information
* Updating controller firmware
質問 # 47
you are preparing a proposal to refresh your customers existing OL380 GE and G7 servers With newer generations. Before making a decision, your customer needs to know if a refresh is worth the cost.
Which option show the value of the purchase to your customer?
- A. Smart CID
- B. Solution sales Enablement Tool
- C. selective Storage presentation
- D. TCO/ROI Calculator
正解：D
解説：
Explanation
According to HPE, the TCO/ROI Calculator is a tool that helps you compare the total cost of ownership (TCO) and return on investment (ROI) of different server solutions . It can help you demonstrate how a server refresh can reduce costs, improve performance, and increase efficiency for your customer.
質問 # 48
Which combination of HPE solutions can provide data validation on MSL3040 and LTO-9 cartridges?
- A. Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software
- B. HPE Command View for Tape Libraries and HPE StoreEver Data Verification
- C. HPE Command View for Tape Libraries and Library and Tape Tools
- D. HPE Command View for Tape Libraries and HPE TapeAssure Advanced
正解：A
解説：
Explanation
Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software: This combination is correct, as Library and Tape Tools (L&TT) is a diagnostic tool that allows you to perform firmware upgrades, run tests, and verify data on tape devices. HPE StoreEver TapeAssure Advanced Software is a software that provides data integrity, performance, health, and utilization reports for tape drives and cartridges, and it works with L&TT to perform data verification2 .
質問 # 49
Your customer has multiple, remote sales offices with one HPE ProL1ant server deployed per Site to run local IT services. They want to centralize the monitoring ana lifecycle management of these servers using a cloud-based offering.
Which tool would demonstrate this functionality?
- A. HPE GreenLake Compute Ops Management
- B. HPE GreenLake Data Services Cloud Console
- C. HPE CloudPhysics
- D. HPE InoSight
正解：D
解説：
Explanation
According to HPE, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also centralize the monitoring and lifecycle management of multiple HPE ProLiant servers deployed in remote sites using a single dashboard
1. With HPE InfoSight, you can demonstrate how to simplify and optimize your customer's IT operations from edge to cloud.
質問 # 50
......
最新HPE0-V26テスト問題集を試そう！更新されたHP試験が合格できます：https://jp.fast2test.com/HPE0-V26-premium-file.html