無料HP HPE7-A03テスト練習問題試験問題集
試験準備には欠かさない！トップクラスのHP HPE7-A03試験最新版アプリ学習ガイドで練習
HP HPE7-A03 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
質問 # 38
Which is true when it comes to Aruba Central licensing for gateways? (Select two.)
- A. Aruba Gateway normallicensing is subdivided into three categories: Foundation. Advanced, and Foundation Base.
- B. Aruba WLAN Gateway licenses allow normal SD-Branch features within a campus.
- C. Aruba SD-8ranch Gateway licenses allow normal WLAN Gateway features within a campus.
- D. SD-WAN Gateway functionality requires security licensing.
正解：C、D
解説：
In the context of Aruba Central licensing for gateways, it is true that SD-WAN Gateway functionality requires a specific security licensing (Option B), which is essential for enabling advanced security features and capabilities in an SD-WAN deployment. This includes functionalities like firewall, threat management, and secure VPN connections. Additionally, Aruba SD-Branch Gateway licenses allow for the use of standard WLAN Gateway features within a campus environment (Option C). This means that with an SD-Branch Gateway license, the gateway can handle traditional WLAN management and security tasks, in addition to its SD-WAN capabilities, providing a unified solution for both branch and campus deployments.
質問 # 39
when is o Mode Conditioning Patch Cable required?
- A. A1000Base-LX Transceiver is operated with 62.5/125 cables up to 500 m.
- B. A10GBase-lR Transceiver is operated with 62 5/125 cables up to 500 m
- C. A10GBase-LXd Transceiver Is operated with 62.5/125 cables up to 2 km.
- D. A1000Base-SX Transceiver is operated with 62.5/125 cables up to 500 m.
正解：A
解説：
Mode Conditioning Patch Cables (MCPs) are used in situations where long wavelength laser transceivers, such as the 1000Base-LX, are deployed over multimode fiber types like the 62.5/125 µm. The 1000Base-LX transceivers are designed primarily for use with single-mode fiber, but they can operate over multimode fiber using an MCP. The MCP is necessary because the core size of multimode fiber (62.5/125 µm) is significantly larger than that of single-mode fiber, which can lead to modal dispersion when a single-mode laser signal enters the multimode fiber. This dispersion can degrade the signal quality over longer distances. The MCP mitigates this issue by aligning the single-mode laser output from the transceiver to a specific launch point in the multimode fiber, thus minimizing dispersion and allowing for effective data transmission over distances up to 500 meters.
質問 # 40
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Based on the scenario, where would you look to add additional items to the BOM to aid the company goals'(Select three.)
- A. Building Facilities
- B. Security Team/CISO
- C. Finance Team
- D. Marketing
- E. Sales Management
- F. Customer Experience Officer
正解：A、C、D
解説：
In addressing the company's goals and the challenges presented in the scenario, adding items to the Bill of Materials (BOM) that would involve the Building Facilities team could include infrastructure upgrades like improved cabling (moving from Cat5 to a higher category) or enhancements to support the new wireless and VoIP systems. For the Marketing team, technologies that could enable better interaction with customers, such as location-based services or analytics tools, would be beneficial. These could help in understanding customer behavior within the stores and tailoring marketing efforts accordingly. Finally, input from the Finance Team would be essential in ensuring that the solutions chosen fit within the budget constraints and offer a good return on investment, especially considering the company's desire for a solution that could last 7+ years and support their growth plans.
質問 # 41
Match thedeployment type with the usage scenario.
正解：
解説：
Explanation:
Capacity based design with low to mid density - Basic office/cubicle area with low to medium user density and no voice with limited rf redundancy.Coverage based design - Coverage, office areas with higher user density OR basic coverage office/cubicle with High Demand usersHigh-capacity design - High user density indoor space, with high demand usersVery low-density, low coverage - Warehouses, large open areas The types of wireless network deployment should be matched to the usage scenarios based on the density of users and coverage requirements:
* Capacity based design with low to mid densityis suitable for basic office or cubicle areas where there are not many users, and high-performance voice applications are not a priority, thus limited RF redundancy may be acceptable.
* Coverage based designis intended for areas where coverage is more critical than capacity. It could be used in office areas with higher user density, where maintaining a basic level of connectivity is more important than accommodating a large number of high-bandwidth connections.
* High-capacity designis used in environments where there is a high density of users who are likely to be using bandwidth-intensive applications. This could include indoor spaces like conference centers, auditoriums, or any area with a high concentration of users and devices.
* Very low-density, low coverageis typically for spaces like warehouses or large open areas where there are few users spread out over a large area. The focus here is on providing coverage to all areas,
* regardless of the low user density.
質問 # 42
XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health centers and
1Z5 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites byenhancingwired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
- XYZ Regional Hospital Is located In New York City
- Dila Health Center Is located in City A
- Mount Health Center is located In City B
- Rock Health Center is located in City C
- Branch clinics are located at different locations across the United States Requirements:
- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting.
- Seamless integration across wired, wireless. WAN, S0-8ranch. loT
* Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
- All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified)
- Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication
- Identify and authenticate every wireless and wired device
- End-to-end role-based security
- Seamless mobility across the hospital tor medical teams, patients, and visitors
- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
- Fully redundant branch solution with dynamic path selection to the hospital XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements:
- fully redundant NAC solution for management and authentication
- wireless and wired authentication for the main hospital will be handled locally
- wireless and wired authentication for the health centers will be handled locally
- wireless and wired authentication tor the clinics will be authenticated against the main hospital NAC
- staff ustrs/devices should able to visit any site and haw the same experience
- support 35k devices
Locations:
- XYZ Regional Hospital is located in City 1 - 15k devices
- Dila Health center is located in City 2 - 8k devices
- Mount Health Center is located in City 3 - 5k devices
- Rock Health Center is located in City 4 - 4k devices
-125 branch clinics are located at different locations across the US - 2k devices Which solution meets the customer's requirements?
- A.
- B.
- C.
- D.
正解：B
解説：
Option B in the provided selections outlines a configuration that includes an Aruba ClearPass Policy Manager as a Publisher for the main DC and as a Standby Publisher for the DR, with subscriber servers allocated to the main hospital and health centers. This setup is likely to match the requirement for a fully redundant NAC solution, with local handling of authentication for the main hospital and health centers, and centralized authentication for the clinics. The inclusion of VMs (Virtual Machines) as subscribers for health centers suggests scalability and flexibility for future expansion. The provision of 35k access licenses aligns with the support for 35k devices across all locations.
質問 # 43
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices and customer requirements, what is the correct LAN approach?
- A. management VLAN in the underlay, user VLANs in the overlay
- B. management and user VLANs in the underlay
- C. management VLAN in the overlay, user VLANs in the underlay
- D. management and user VLANs in the overlay
正解：A
解説：
In the context of the ESP architecture from Aruba and the specific requirements of the cruise line company, the best practice would be to place management VLANs in the underlay and user VLANs in the overlay. This design allows for a clear separation of management traffic from user data, enhancing security and network performance. The management underlay ensures secure and reliable access to network infrastructure for administrative purposes, while the user overlay allows for flexible and dynamic segmentation of user traffic.
This approach is aligned with best practices for network design, where critical management traffic is isolated from user data to prevent unauthorized access and potential security breaches. It also supports the cruise line's need for a robust and secure network to ensure the operational reliability of paid guest Wi-Fi and other critical services.
質問 # 44
Which is true with regard to device capabilities?
- A. You should determine If devices support 2 A GHz or 5 GHz. No consideration Is yet required for 6 GHz as It has yet to be ratified,
- B. Wi-Fi 6E supports 6 GHz for both indoor and outdoor deployments since it was ratified in April of
2020. - C. Aruba recommends ao-50 devices per radio for a generic office deployment.
- D. Aruba's best practice is to use whatever the AP model supports as a maximum.
正解：C
解説：
Aruba's recommendation for device density in a generic office environment is based on achieving optimal performance and user experience. The suggestion to support 30-50 devices per radio takes into account the typical bandwidth requirements, application usage, and performance expectations in an office setting. This range is designed to ensure that the wireless network can adequately support the number of devices without significant degradation in service quality. It balances the need for connectivity with the practical limits of wireless technology, ensuring that each device maintains a reliable connection and adequate throughput. This recommendation is part of Aruba's best practices for network design and deployment, aimed at providing efficient and effective wireless coverage in office environments.
質問 # 45
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what should you recommend as the correct optic type for the connection between the IDF and the cabins?
- A. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
- B. Aruba 106 SFP- LC SR 300 m MMF Transceiver
- C. Aruba 10GBASE-T SFP- RJ--35 30 m Cat6A Transceiver
- D. Aruba 10G LC BiDi 40 km-D 1330/1270 XCVR
正解：B
解説：
For the connection between the IDF and the cabins, which requires supporting distances up to 60 meters on OM2 fiber, the most appropriate optic type is the Aruba 10G SFP+ LC SR 300 m MMF Transceiver. This transceiver is compatible with multi-mode fiber (MMF) and is capable of supporting the required distance for connections to the cabins, making it a suitable choice based on the company's existing cabling structure and the need for 10GbE uplink capabilities to manage increased network traffic. The SR (Short Range) designation indicates that this transceiver is optimized for short to medium distances, which aligns with the maximum
60-meter distance from IDF to cabins, ensuring reliable and high-speed connectivity for the ship's LAN infrastructure within the given physical constraints.
質問 # 46
A customer wants to have the ability to show network usage. Which product would allow them to have this visibility?
- A. Central
- B. Aruba OS 8.X
- C. ClearPass
- D. UXI
正解：A
解説：
Aruba Central provides a cloud-based management platform for managing and monitoring Aruba Instant APs, switches, and branch gateways. It offers a comprehensive dashboard that gives insights into network usage, health, and performance metrics. Central allows network administrators to have visibility over their entire network infrastructure from a single pane of glass, including detailed usage statistics, which can be broken down by device, application, and time. This visibility into network usage is crucial for optimizing network performance, planning capacity, and understanding user behavior. Aruba Central's analytics and reporting capabilities enable customers to track and analyze network usage, making it the appropriate product choice for customers wanting to monitor their network usage closely.
質問 # 47
What possible issue with the cote switch selection do you see in regards to the customers' requirements?
- A. The cote switch will not support the 10GbE downlinks to the cabins and technical rooms.
- B. The cote switch will have a lot of unused ports.
- C. The cote switch will not have enough ports for VSX links.
- D. The core switch will not support the 25GbE downlinks to the distribution switches.
正解：D
解説：
In the scenario described, the most significant issue with the core switch selection, according to Aruba Campus Access learning resources, is answer A: "The core switch will not support the 25GbE downlinks to the distribution switches." This is a critical consideration because the bandwidth capabilities between the core and distribution layers significantly impact the overall network performance and scalability. If the core switch cannot support 25GbE downlinks, it may create a bottleneck, preventing the distribution switches from operating at their full capacity and affecting the performance of connected devices and applications. Ensuring the core switch has the necessary port speeds and densities to support the intended design and traffic patterns is crucial in network design, as emphasized in Aruba's documentation on campus network architectures.
質問 # 48
You hired a junior engineer to assist you with a large-scale network infrastructure project. The engineer has never worked on such a complex project before and wants to better understand the role that each stakeholder will play in the project.
What is the role of the Network Designer/Architect in this project?
- A. responsible for authoring the low-level design and creating the configuration to meet the technical requirements
- B. responsible for establishing security policy and selecting security controls for the infrastructure
- C. responsible 'or supporting, troubleshooting, and monitoring the wired/wireless infrastructure
- D. responsible for Investigating IDS/IPS Incidents and managing firewalls
正解：A
解説：
The role of the Network Designer/Architect in a large-scale network infrastructure project is to develop a detailed technical design that meets the project's requirements. This involves authoring the low-level design documents, which include detailed network diagrams, device configurations, and implementation guidelines.
The Network Designer/Architect must understand the technical specifications and business goals to create a solution that is not only technically sound but also aligned with the organization's objectives. This role is critical inensuring that the network infrastructure is designed to be scalable, reliable, and secure, providing a solid foundation for the organization's operations.
質問 # 49
Based on this campus design, click on the layer that is the most appropriate to be designed as a Stub Persona, considering an EVPN VXLAN Fabric?
正解：
解説：
Explanation:
In an EVPN VXLAN Fabric, the most appropriate layer to be designed as a Stub Persona, which typically refers to the edge or endpoint of a network with simplified routing and forwarding, would be the "Access" layer. This is where endpoints, such as user devices, connect to the network, and it's where you would typically implement simplified network protocols that do not require full routing information.
The Access layer is the entry point for endpoints into the network fabric, and it benefits from EVPN VXLAN by segmenting traffic and providing layer 2 connectivity over a layer 3 fabric without the need for complex routing protocols. The stub would not need the full capabilities of the core or aggregation layers, making the Access layer the ideal candidate.
質問 # 50
The clients existing network isexperiencing trouble with voice occasionally dropping out on phone calls between office locations, it Is determined that no packet loss is occurring and QOS is likely the cause. With what phenomenon Is the client currently experiencing issues?
- A.
- B.
- C.
正解：A
解説：
The client is experiencing issues with Jitter, as depicted in Option B. Jitter refers to the variation in time between packets arriving, caused by network congestion, timing drift, or route changes. In voice communications, jitter can manifest as the occasional dropping out of voice on phone calls because the variable delay can affect the steady stream of voice packets needed for a clear conversation. Even when there is no packet loss, high levels of jitter can significantly impact the quality of Voice over IP (VoIP) calls.
Quality of Service (QoS) settings are essential in managing jitter, as they can prioritize voice traffic over other types of data, ensuring that voice packets are delivered consistently and in the correct order to minimize delays and prevent call quality degradation. Aruba Campus Access solutions would typically include QoS features to manage and mitigate jitter on the network.
質問 # 51
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what should be recommended as the most cost-effective switch model tor the technical rooms?
- A. Aruba 6300M 12p Classd PoE and 36p Class6 PoE HPE Smart Rate 1G/2.5G/5G and 2p SOG and Zp
10G - B. HPE Aruba Networking 6200M 24G Class- PoE 4SFP*
- C. HPE Aruba Networking 6200M 36G 12SR5 ClassG PoE 4SFP*
- D. HPE Aruba Networking6300M 24p HPESmart Rate 1 G/2.5G/5G/1OG Class6 PoE and 2p 50G and 2 p
25G
正解：D
解説：
For technical rooms requiring redundant power and an upgrade to 10GbE uplinks to handle increased network traffic, the most cost-effective switch model is the HPE Aruba Networking 6300M 24p HPE Smart Rate
1G/2.5G/5G/10G Class6 PoE and 2p 50G and 2p 25G. This model offers the necessary port density and speed flexibility, with support for high-power PoE devices and uplink capabilities that meet the future-proofing needs for technical rooms on the cruise ships. The switch's redundant power capabilities ensure high availability and resilience for critical technical room infrastructure, aligning with the customer's requirements for sustainability, cost-effectiveness, and preparedness for future hardware refreshes without extensive unused port capacities.
質問 # 52
Which alternative source is best suited for site surveys or simul-ations if no floor plans are available?
- A. blank sheet of paper
- B. Google Maps
- C. tire escape plan
- D. simple wall drawings
正解：C
解説：
When floor plans are not available for site surveys or simulations, the best alternative source to use is the fire escape plan (Option D). Fire escape plans are typically available in most buildings and provide a simplified layout of the premises, including walls, doors, and sometimes the location of permanent fixtures. While not as detailed as architectural floor plans, fire escape plans can offer enough information for initial site survey estimations and RF planning. They allow network designers to understand the basic layout and potential RF obstacles or coverage areas, making them a practical tool for preliminary wireless network planning and simulations in the absence of more detailed floor plans.
質問 # 53
What should be Included in an Executive Summary? (Placethe correct Items into the let at the right Order is no: Important Not all cottons win be used)
正解：
解説：
Explanation:
For an Executive Summary, typically the following items should be included:
* Brief Summary
* Contact Information
* High-Level Design
* Purpose of the Document
* Recommendations
* Scope
* Target Audience
質問 # 54
XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health centers and
1Z5 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites by enhancing wired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
- XYZ Regional Hospital Is located In New York City
- Dila Health Center Is located in City A
- Mount Health Center is located In City B
- Rock Health Center is located in City C
- Branch clinics are located at different locations across the United States Requirements:
- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting.
- Seamless integration across wired, wireless. WAN, S0-8ranch. loT
* Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
- All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified)
- Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication
- Identify and authenticate every wireless and wired device
- End-to-end role-based security
- Seamless mobility across the hospital tor medical teams, patients, and visitors
- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
- Fully redundant branch solution with dynamic path selection to the hospital XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements:
- fully redundant NAC solution for management and authentication
- wireless and wired authentication for the main hospital will be handled locally The IT director of XYZ Regional Hospital is interested in a solution tor nurse workstation tracking. What solution would meet the customer's requirements? (Select three.)
- A. Client insight
- B. Map Subscription
- C. Asset Tracking Subscription
- D. Airwave
- E. Aruba Tags Configuration App
- F. Aruba User Experience Insight
正解：B、C、F
解説：
For nurse workstation tracking, Aruba User Experience Insight can provide insights into how applications and network services are performing, which can help in understanding user experiences across the hospital network. The Asset Tracking Subscription is a crucial component for keeping track of physical assets such as nurse workstations. The Map Subscription would complement the asset tracking by providing detailed maps of the hospital's interior, enabling precise location tracking of the workstations. These solutions together would allow the hospital to effectively track and manage their resources, ensuring that nurses can find workstations quickly and efficiently, which is essential in a fast-paced medical environment.
質問 # 55
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security on the wired network infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks. For their POS systems, they need a low-latency network connection between the POS system and the POS server in the data center on the ship. Also, the CSO wants to enhance the WLAN security as well by tunneling all user traffic.
What solution fits the customer's requirements?
- A. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8320 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor
- B. Standardize on Aruba 6300 switches for the edge. 8325 for the RR. 8360 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor.
- C. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8360 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor.
- D. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8360 for the stub/border, and utilize Aruba Central NetConductor
- E. Standardize on Aruba 6200 switches for the edge. 8325 for the RR. 8360 for the stub/border, and utilize Aruba Central NetConductor
正解：C
解説：
Considering the global cruise line company's requirement to enhance wired network security while ensuring low-latency connections for POS systems and tunneling all user traffic for WLAN security, the most fitting solution involves a combination of Aruba switches and gateway along with a network management and orchestration tool. Specifically, standardizing on Aruba 6300 switches for the edge layer caters to the need for high-performance, fan-less switches with 10GbE uplinks, matching the requirement for upgraded cabin and technical room connections. The Aruba 8320 as a Route Reflector (RR) and Aruba 8360 for the stub/border provide a robust core and distribution layer with high throughput and redundancy. The inclusion of a 9240 WLAN Gateway addresses the need for secure WLAN user traffic tunneling. Utilizing Aruba Central NetConductor enhances network management efficiency, security policy enforcement, anddynamic segmentation across the wired and wireless infrastructure, aligning with the ESP architecture from Aruba and meeting the company's security enhancement objectives.
質問 # 56
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like 10 include Blue Dot wayfinding for their carpeted office space. The retail floors are not currently in scope What would be needed to ensure proper licensing of the solution?
- A. Qty 4 Meridian Blue Dot subscriptions
- B. Qty 1 Meridian Blue Dot subscription
- C. Qtyl Meridian Tracking subscription
Qty 1 Meridian Blue Dot subscription - D. Qty 4 Meridian Map subscriptions
Qty 4 Meridian Blue Dot subscriptions
正解：B
解説：
For implementing Blue Dot wayfinding in the carpeted office space of the multinational financial institution, a Meridian Blue Dot subscription is essential. Meridian's Blue Dot wayfinding technology allows for real-time indoor navigation, which can enhance the experience of employees and visitors by providing turn-by-turn directions within the office space. Given that the requirement is specifically for the carpeted office space and not for the retail floors, a single Meridian Blue Dot subscription would be the starting point to enable this functionality. This subscription would cover the deployment of the Blue Dot technology across the specified office floors, allowing for the integration of this feature into the institution's app or digital platform for indoor navigation. Additional subscriptions, such as Meridian Map subscriptions, might be required for more extensive mapping needs, but based on the provided options and the specific request for Blue Dot functionality, a single Blue Dot subscription would be the most direct answer.
質問 # 57
Which licenses are needed in order to use the UXl Client on Zebra (Devices? (Select two.)
- A. Wireless Insights
- B. UXl Agent Subscription
- C. UXl LTE Subscription
- D. UXI Cloud Subscription
正解：B、D
解説：
To utilize the UXI Client on Zebra Devices, the necessary licenses include the UXI Cloud Subscription (Option A) and the UXI Agent Subscription (Option B). The UXI Cloud Subscription provides access to the UXI platform's cloud-based analytics and insights, facilitating the monitoring and management of network performance and user experience. The UXI Agent Subscription is required for each Zebra device, enabling it to run the UXI Client software that collects and sends network performance data to the UXI cloud platform.
Together, these licenses empower organizations to enhance network visibility and improve the user experience on Zebra devices within their networks.
質問 # 58
......
今すぐHPE7-A03問題を使おうHPE7-A03問題集PDF：https://jp.fast2test.com/HPE7-A03-premium-file.html
問題集練習試験問題学習ガイドはHPE7-A03試験にはこれ：https://drive.google.com/open?id=19InNHbV8FJtqzYDqibmHVYkD-RjjgRHO