無料EMC D-PDD-DY-23試験問題と解答トレーニングを提供しています
トップクラスEMC D-PDD-DY-23オンライン問題集
質問 # 36
Which port is used by default on a PowerProtect DD to listen for CIFS clients?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 37
A company that handles critical data wants to replicate their entire system onto a destination system at a remote site. They want to ensure that the replicated data remains unchanged.
Which type of PowerProtect DD data replication performs the fastest?
- A. Pool
- B. Collection
- C. Directory
- D. MTree
正解：B
質問 # 38
What is one advantage of using PowerProtect DD instead of backing up to other disk-based file systems?
- A. Only deduplicated blocks of data are needed for full recovery.
- B. Data can be restored to any client operating system.
- C. Data is stored locally on the client for fast restore.
- D. Only deduplicated data is sent across the network.
正解：D
質問 # 39
A backup administrator has enabled encryption on a PowerProtect DD appliance. They are attempting to change the passphrase.
What is a consideration when changing the passphrase?
- A. User with the Admin role is sufficient to change the passphrase
- B. File system must be disabled before changing the passphrase
- C. File system must be enabled before changing the passphrase
- D. User with the Security role is sufficient to change the passphrase
正解：B
質問 # 40
A customer needs an upgrade on their DD6900 to use HA.
Which expansion shelf is required?
- A. ES40
- B. FS25
- C. DS60
- D. ES25
正解：A
質問 # 41
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD3300 Which compression algorithm will they see enabled by default
- A. Gzfast
- B. Gz
- C. LZ
- D. LZW
正解：A
質問 # 42
An administrator is scaling Cloud Tier for a DD9900 by adding a second cloud unit.
What is the required amount of metadata storage (TB)?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 43
What is the maximum capacity for an on-premises DDVE with no cloud storage?
- A. 96 TB
- B. 128 TB
- C. 256 TB
- D. 64 TB
正解：A
質問 # 44
An administrator notices that several disks on a shelf show as unknown.
What should be done to resolve this issue?
- A. Cycle the power on the newly added expansion shelf
- B. Enter the storage add enclosure command
- C. Enter the disk unfail command for the unknown disks
- D. Ensure the expansion shelf is cabled properly
正解：C
質問 # 45
Refer to the exhibit.
To which shelf and port should SAS HBA slot 1 port B be connected?
- A. Shelf 04 BE
- B. Shelf 04 BH
- C. Shelf 01 BE
- D. Shelf 01 BH
正解：B
質問 # 46
A PowerProtect DD with two ES40 expansion shelves was just installed. An error message is received.
What is the most likely reason?
- A. The expansion port on the shelf connects downstream to the host port of the next shelf
- B. The controller HBA port connects to the host port of an expansion shelf
- C. The expansion port on the last shelf connects back to the controller
- D. The host port on the expansion shelf connects upstream to the controller
正解：C
質問 # 47
An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves.
What consideration should be made when cabling the hardware?
- A. The DS60 shelf must be populated with identical drives
- B. The DS60 shelf should be cabled on a separate chain
- C. The FS25 shelf must be fully populated
- D. The FS25 shelf should be cabled on a separate chain
正解：A
質問 # 48
An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received.
What is the reason for the failure?
- A. There are not enough snapshot licenses
- B. The DDOS needs to be upgraded
- C. The maximum number of snapshots has been exceeded
- D. The user does not have the permission to retain more snapshots
正解：C
質問 # 49
A CommVault Simpana administrator would like to use the benefits of DD Boost.
Which technology will allow this integration?
- A. CIFS
- B. VTL
- C. BoostFS
- D. NFS
正解：C
質問 # 50
When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?
- A. SESSTIMEOUT to 7200 seconds
- B. SMBTimeout to 7200 seconds
- C. SESSTIMEOUT to 3600 seconds
- D. CIFSTimeout to 3600 seconds
正解：C
質問 # 51
If PowerProtect DD administrator issue a cifs share destroy command, what is the result?
- A. The CIFS share is deleted.
- B. The CIFS share and contents of the share are deleted.
- C. The contents of the CIFS share are deleted.
正解：A
質問 # 52
An engineer is attempting to add an ES40 shelf to a PowerProtect DD9400. The system currently has one DS60 and four ES40 shelves on the same chain. The system does not recognize the additional shelf.
Why has this occurred?
- A. The system capacity license is insufficient
- B. ES40 and DS60 shelves must be placed on separate chains
- C. An active tier license must be added for additional storage
- D. The maximum number of shelves on the chain is exceeded
正解：D
質問 # 53
A customer needs to configure a pair of PowerProtect DD6900 systems to use high availability.
Which expansion shelf is required?
- A. FS25
- B. ES40
- C. DS60
- D. ES25
正解：A
質問 # 54
What rule must be followed during an upgrade procedure with the FS25 expansion shelf?
- A. ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five
- B. For high performance, the connections from a controller to FS25 shelves must be over FC cables
- C. FS25 shelf must be on the same chain with DS60
- D. FS25 shelf is cabled on a separate private chain
正解：A
質問 # 55
......
最新（2025)EMC D-PDD-DY-23試験問題集：https://jp.fast2test.com/D-PDD-DY-23-premium-file.html
D-PDD-DY-23練習問題集で検証済みのFast2test更新された165問題あります：https://drive.google.com/open?id=13mPgI83aR2xmHxyyRWg8MTAiFEYXVO9M