最適な練習法にはVMware 5V0-42.21問題集で素晴らしい5V0-42.21試験問題PDF
更新された検証済みの合格させる5V0-42.21試験リアル問題と解答
VMware 5V0-42.21試験は、SD-WANテクノロジーを深く理解し、その知識を実際の設定で適用する能力を必要とする挑戦的なテストです。ただし、この試験に合格すると、雇用機会の増加、給与の増加、雇用の安全性の向上など、ITの専門家にとって多くの利益につながる可能性があります。さらに、この試験の準備から得られた知識とスキルは、専門家が組織の進化するニーズを満たすより効果的なSD-WANソリューションを設計および展開するのに役立ちます。
VMware 5V0-42.21の試験に備えるために、候補者はネットワークの基礎的な理解とVMware SD-WANソリューションの経験を持っていることが必要です。VMwareは、試験の準備をするためのトレーニングコース、学習教材、練習問題などの幅広い資料を提供しています。さらに、候補者は、ラボ環境でVMware SD-WANソリューションを展開し、管理することで実践的な経験を得ることができます。VMware 5V0-42.21の試験に合格することは、ネットワークの専門家がVMware SD-WAN技術の専門知識を証明し、ネットワーク分野でのキャリアを進めるための素晴らしい方法です。
質問 # 16
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?
- A. Select WAN Link, and then define the DSCP tagging
- B. Select Transport Group, and then select Preferred option.
- C. Select Error Correct Before Steering with % definition
- D. Deselect Error Correct before Steering Defaults.
正解：A
質問 # 17
What is considered a typical VMware SD-WAN use case?
- A. Provide management, control plane, and data forwarding from a single system to reduce complexly for the network administrator.
- B. Provide high speed layer 2 data center interconnects.
- C. Provide a distributed (per device) commands line interface (CLI) based configurations to implement complex network designintegrationoptions.
- D. Provide cloud delivered central management Orchestrator toimplementcomplex design network integration options.
正解：A
質問 # 18
A customer is looking to have Quality of Service (QoS), resource allocations, link/path steering, and error correction applied automatically based on applications.
Which component of VMware SD-WAN helps the customer achieve this requirement?
- A. Overlay Flow Control
- B. Business Policy Framework
- C. Branch Site Topologies
- D. High Availability Configuration
正解：B
質問 # 19
Which port is used for the high availability connection between the two Edges on a pair of Edge 510s?
- A. GE4
- B. SFP1
- C. GE1
- D. Any port may be chosen.
正解：B
質問 # 20
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?
- A. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings
- B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward
- C. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
- D. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings
正解：D
質問 # 21
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - D. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default.
正解：A
質問 # 22
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 2 segments
- B. 4 segments
- C. 5 segments
- D. 6 segments
正解：C
質問 # 23
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.
- B. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- C. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- D. The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.
正解：B
質問 # 24
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
- A. UDP 500
- B. TCP 80
- C. TCP 443
- D. UDF 2426
正解：D
質問 # 25
A network architect from a service provider is designing an architecture using a VMware SD-WAN Partner Gateway handoff.
Which dynamic routing protocol should the engineering choose?
- A. BGP
- B. Static
- C. OSPF
- D. RIP Version 2
正解：D
質問 # 26
A customer would like to ensure that the traffic towards the Partner Gateway does not exceed a certain bandwidth.
Which feature should be used?
- A. Modify the SD WAN Traffic Class and Weight Mapping
- B. Enable the rate limit under a new custom Business Policy Rule.
- C. Enable the SD-WAN Overlay Rate-Limit.
- D. Change the application priority to low.
正解：D
質問 # 27
Which three authentication mode options ate valid for use on the VMware SD-WAN Edge? (Choose three.)
- A. Certificate ate Optional
- B. Certificate Enabled
- C. Certificate Accepted
- D. Certificate Requited
- E. Certificate Disabled
- F. Certificate Activated
正解：B、C、E
質問 # 28
Company A has recently acquired Company B and needs to establish network connectivity. Company A has only Cisco for firewalls and VPN. Company B is using VMware SD-WAN.
Which VMware SD-WAN Cloud VPN solution should an administrator configure to establish connectivity?
- A. Branch to Non VMware SD-WAN Site.
- B. Branch to Branch VPN
- C. Branch to SD-WAN Hub
- D. Branch to Main Office VPN
正解：A
質問 # 29
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
- A. Cloud VPN
- B. Split Brain Detection
- C. VRRP
- D. SD-WAN Service Reachable on the private overlay
正解：D
質問 # 30
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
- B. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- C. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
- D. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
正解：D
質問 # 31
Given a VMware SD WAN Branch Edge with Dual Internet links A and B:
* Link A has 50 Mb capacity and latency 10ms
* Link H has 50 Mb capacity and latency 10ms
A database backup of 40Mbps is parted, and the traffic classified as low priority bulk traffic.
Which statement is correct?
- A. Link Aggregation may take place, and both links could be used.
- B. DMPO will perform pen How load balancing.
- C. Packet duplication will take plant? to ensure both links are optimized.
- D. Packets will be sent nut the highest latency link first as this is low priority bulk traffic
正解：A
質問 # 32
A customer has a hybrid VMware SD-WAN deployment and wants to use the SD-WAN Service Reachable feature on the private WAN.
What is the main dependency that must be met for the feature to work?
- A. Gateway IPs must be routed in the overlay
- B. Internet reachability via the private WAN
- C. Default route learned via dynamic routing
- D. Static mute for gateway IPs on the edge
正解：C
質問 # 33
Refer to the exhibit.
Which VMware SD-WAN Edge High Availability deployment is being used"?
- A. Fault Domain HA
- B. Enhanced HA
- C. Standard HA
- D. VRRP HA
正解：D
質問 # 34
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Edge
- B. VMware SD-WAN Controller
- C. VMware SD-WAN Hub
- D. VMware SD-WAN Orchestrator
正解：B
質問 # 35
......
VMware 5V0-42.21試験は、VMware SD-WAN Design and Deeply Skills Examとしても知られており、VMWare SD-WANソリューションの設計と展開における知識とスキルを検証したいITプロフェッショナル向けに設計された認定試験です。この試験は、ネットワークおよび仮想化テクノロジーの経験があり、ソフトウェア定義の広い領域ネットワーキングのスキルを向上させたい専門家を対象としています。
更新されたPDF（2024年最新）実際にあるVMware 5V0-42.21試験問題：https://jp.fast2test.com/5V0-42.21-premium-file.html
問題集返金保証付きの5V0-42.21問題集公式問題集：https://drive.google.com/open?id=1_-GBqUsfogw0IOW7FrdEDucGDrfl-VJp