最新 [2025年07月01日]Supermicro SDLCSA試験練習でテストの素晴らしい結果を出そう
あなたのキャリアーを稼いで飛躍せよSupermicro SDLCSA
質問 # 18
How many screws need to be removed in order to release the AOC card from the bracket?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
解説：
An AOC (Add-On Card) in Supermicro systems, such as a NIC or GPU card, is secured to its bracket with1 screwon the metal bar at the top, a standard PCIe card mounting practice (e.g., SYS-420GP-TNAR manuals).
This single screw ensures stability while allowing easy removal, consistent with Supermicro's DLC system serviceability. 4 (A), 2 (B), or 3 (D) screws would be excessive for a single card bracket. Supermicro's modular design in DLC solutions supports C as the verified number.References:Supermicro AOC card installation guides, DLC system component specs.
質問 # 19
Before removing the LPIO board from the PCIe tray, what other component needs to be removed first?
- A. Metal bracket
- B. GPU tray
- C. Air shroud
- D. Motherboard tray
正解：A
解説：
The LPIO (Low-Profile IO) board in Supermicro systems like the SYS-421GE-TNHR2-LCC, part of the PCIe tray, is typically secured by ametal bracketthat must be removed first. This bracket holds the LPIO board and associated cables (e.g., BMC cable) in place, as seen in similar designs (e.g., SYS-420GP-TNAR). Removing it involves unscrewing (often 2 screws) and lifting it off, granting access to the LPIO board. A (GPU tray) is a separate assembly, C (motherboard tray) is unrelated to the PCIe tray's LPIO, and D (air shroud) covers components but doesn't secure the board. Supermicro's DLC systems emphasize modular access, making B the correct step.References:Supermicro PCIe tray service guides, DLC system IO component layouts.
質問 # 20
Where in the chassis are the internal fans and fan housing located?
- A. In the middle of the PCIe tray
- B. In the back of the PCIe tray
- C. In the back of the motherboard tray
- D. In the middle of the motherboard tray
正解：D
解説：
In Supermicro systems like the SYS-421GE-TNHR2-LCC, internal fans and their housing are typically located in themiddle of the motherboard tray, providing airflow across CPUs and memory, even in DLC setups where liquid cooling handles primary heat removal. This placement, seen in similar systems (e.g., SYS-
420GP-TNAR), balances cooling distribution. A and B (PCIe tray) focus on GPU cooling, not motherboard fans, while C (back of motherboard tray) is less common due to PSU placement. Supermicro's DLC hybrid designs integrate fans centrally on the motherboard tray, making D correct.References:Supermicro chassis layouts, DLC hybrid cooling configurations.
質問 # 21
How do you know when the DIMM has been properly inserted back into the slot?
- A. You should hear a click after you've pressed the DIMM down into the slot
- B. You should still be able to wiggle the DIMM after you've pressed the DIMM down into the slot
- C. You should see a green lit button on the DIMM
- D. You shouldn't hear a click after you've pressed the DIMM down into the slot
正解：A
解説：
When inserting a DIMM in Supermicro systems, proper seating is confirmed by aclickas the slot latches snap into place, securing the module (e.g., SYS-420GP-TNAR manuals). This audible feedback is standard in DLC systems for reliable memory installation. B (green button) isn't a feature, C contradicts correct insertion, and D (wiggling) indicates failure. Supermicro's design ensures firm DIMM placement, making A the verified sign.References:Supermicro DIMM installation guides, DLC system component reliability.
質問 # 22
Which card would you most likely connect to the AOM module (AOM-GP401-PCIE)?
- A. AOC NIC card
- B. Credit card
- C. Debit card
- D. AOM card
正解：A
解説：
The AOM module (AOM-GP401-PCIE) in Supermicro systems is a PCIe-based add-on module, typically for expansion cards like NICs (Network Interface Cards). The AOC NIC card (Add-On Card, Network Interface Card) is the most likely connection, as Supermicro's AOM modules (e.g., in SYS-420 series) are designed to interface with AOC cards for networking in DLC systems. A (AOM card) is vague and not a standard term, while B and D (credit/debit cards) are irrelevant. Supermicro's DLC solutions integrate high-speed networking, making C the verified choice.
References: Supermicro AOM module specs, DLC system networking components.
質問 # 23
The PCIe tray requires two (2) people to lift and remove from the system. True or False.
- A. True
- B. False
正解：A
解説：
In Supermicro's high-end systems like the SYS-421GE-TNHR2-LCC, the PCIe tray, often loaded with multiple GPUs (e.g., 8 NVIDIA HGX GPUs in DLC setups), is heavy and complex. Supermicro's safety guidelines (e.g., SYS-420GP-TNAR Manual) recommend two people for removing such trays due to weight (over 50 lbs with GPUs) and the need to avoid damaging liquid cooling lines or connectors. In DLC systems, the tray integrates with coolant manifolds, adding to its bulk. Thus, True (A) aligns with Supermicro's expertise in ensuring safe handling of DLC components.References:Supermicro safety instructions, DLC rack-scale system specs.
質問 # 24
Which cable needs to be disconnected first, before lifting the fan up and out of the metal housing?
- A. SATA cable
- B. Power cable
- C. PCIe cable
- D. I2C cable
正解：B
解説：
Fans in Supermicro systems, including those with DLC like the SYS-421GE-TNHR2-LCC, are powered by a power cable connecting to the fan board or motherboard. Before removing a fan from its housing, the power cable must be disconnected first to ensure safety and prevent electrical damage, a standard step in Supermicro' s service protocols. PCIe cables (A) connect expansion cards, I2C cables (C) handle communication (not fan power), and SATA cables (D) link storage drives-none are relevant to fan removal. In DLC systems, where fans may supplement liquid cooling, power disconnection remains critical, making B the verified answer.
References: Supermicro fan replacement guides, DLC hybrid cooling safety standards.
質問 # 25
What must be removed first, in order to remove the BMC cable and IO Module from the PCIe tray?
- A. The BMC cage
- B. The AOC cage
- C. The PCIe tray
- D. The AOM cage
正解：B
解説：
The BMC (Baseboard Management Controller) cable and IO Module in Supermicro systems like the SYS-
421GE-TNHR2-LCC are often tied to add-on cards (AOC) within the PCIe tray. The AOC cage (likely an Add-On Card cage) must be removed first to access these components, as it houses cards and cables interfacing with the BMC. Supermicro's design (e.g., SYS-420 series) places AOC cages as sub-assemblies within the PCIe tray, requiring removal before deeper access. A (AOM cage) may be a typo or misidentification, B (BMC cage) isn't standard terminology here, and C (PCIe tray) is too broad since it's the parent assembly. D fits Supermicro's DLC service hierarchy, making it correct.
References: Supermicro PCIe tray sub-assembly guides, DLC system component access.
質問 # 26
What design feature helps to align the air shroud back into the motherboard tray?
- A. There are 4 tabs on front of the air shroud that should align with 4 slots on top of the fan board
- B. There are 2 tabs on the sides of the air shroud that should align with 2 slots on top of the PCIe board
- C. There are 2 tabs on front of the air shroud that should align with 2 slots on top of the fan board
- D. There are 3 tabs on front of the air shroud that should align with 3 slots on top of the fan board
正解：D
解説：
In Supermicro systems, the air shroud aligns with the motherboard tray via tabs and slots. The correct feature is3 tabs on the front of the air shroud aligning with 3 slots on top of the fan board, a common design (e.
g., SYS-420GP-TNAR) for precise placement over fans and CPUs. B (4 tabs) and C (2 tabs) deviate from standard counts, while D (PCIe board) misplaces the alignment. Supermicro's DLC hybrid cooling ensures shroud accuracy, making A correct.References:Supermicro air shroud installation guides, DLC system cooling alignment.
質問 # 27
Which type of Liquid Cooling is discussed in this training?
- A. Rear Door Heat Exchanger (RDHx)
- B. Evaporative Cooling
- C. Direct to Chip (DLC)
- D. Immersion Cooling (ILC)
正解：C
解説：
The training focuses on Supermicro'sDirect to Chip (DLC)liquid cooling, as indicated by the context of SYS-
421GE-TNHR2-LCC and Supermicro's expertise in DLC solutions (e.g., cold plates, CDUs up to 100kW).
DLC circulates coolant directly to CPUs/GPUs, reducing OPEX by 40% and supporting high-density racks. A (RDHx) cools via rear doors, B (Evaporative) uses evaporation, and C (ILC) submerges servers-none match Supermicro's DLC emphasis here. D is the verified type.References:Supermicro DLC whitepapers, SYS-
421GE-TNHR2-LCC cooling specs.
質問 # 28
How many screws need to be removed from the metal bracket that holds down the LPIO board / BMC cable?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
The LPIO (Low-Profile IO) board and BMC cable in Supermicro systems are typically secured by a minimal number of screws for quick serviceability, a principle in DLC designs like the SYS-421GE-TNHR2-LCC.
Based on similar systems (e.g., SYS-420GP-TNAR), the metal bracket holding these components is fastened with 2 screws, balancing security and ease of access. Higher counts like 8 (A), 5 (B), or 6 (D) are excessive for a small bracket, while 2 (C) matches Supermicro's standard for IO-related brackets. In DLC contexts, modularity is key, supporting C as the verified number.
References: Supermicro IO board installation guides, DLC system service efficiency.
質問 # 29
When reseating the PCIe tray, how do you know when the PCIe tray has been correctly inserted all the way back into the system?
- A. The levers on each side of the front of the PCIe tray that were in the up position should move down slightly
- B. The front of the PCIe tray should be slightly sticking out of the system
- C. The levers on each side of the front of the PCIe tray that were in the down position should move up slightly
- D. The levers on each side of the front of the PCIe tray that were in the down position should move up all the way into the locked position automatically
正解：D
解説：
Reseating the PCIe tray in a Supermicro system like the SYS-421GE-TNHR2-LCC involvesaligning it with the chassis and locking it in place. Per Supermicro's design (e.g., SYS-420GP-TNAR), the tray has levers that start in the down (unlocked) position during insertion. When fully seated, these levers automatically move up to the locked position, clicking into place to secure the tray and ensure proper connection to power and cooling (e.g., DLC manifolds). Option A (sticking out) indicates incomplete insertion, B (slightly up) is insufficient, and C (up to down) reverses the mechanism. D reflects Supermicro's DLC system precision, ensuring tray stability.References:Supermicro PCIe tray installation guides, DLC component alignment standards.
質問 # 30
Which card would you most likely connect to the AOM module (AOM-GP401-PCIE)?
- A. AOC NIC card
- B. Credit card
- C. Debit card
- D. AOM card
正解：A
質問 # 31
What are the full steps and proper order for replacing a failed power supply unit in the SYS-421GE-TNHR2- LCC system?
- A. Lift the red lock to unlock the release lever > Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one > Ensure the gold connector pins are on the top > Push the new power supply unit into the tray > Push the release lever down and in until it clicks > Ensure the red lock on the release lever is locked
- B. Lift the blue lock to unlock the release lever > Push the release lever down and in until it clicks > Ensure the red lock on the release lever is locked
- C. Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one > Push the new power supply unit into the tray > Push the release lever down and in until it clicks
- D. Lift the yellow lock to unlock the release lever > Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one
正解：A
解説：
Replacing a PSU in Supermicro's SYS-421GE-TNHR2-LCC follows a detailed, safety-focused process:
Lift the red lock to unlock the release lever: Red is a common Supermicro color for PSU locks.
Lift the release lever and use it to pull out the failed PSU: Standard hot-swap mechanism.
Replace the failed PSU with a new one: Swap the unit.
Ensure the gold connector pins are on the top: Correct orientation for connection.
Push the new PSU into the tray: Slide it in fully.
Push the release lever down and in until it clicks: Locks the PSU.
Ensure the red lock is locked: Confirms security.
Option B covers all steps comprehensively, aligning with Supermicro's DLC system PSU replacement (e.g., SYS-420 manuals). A is incomplete, C reverses steps, and D skips locking, making B correct.
References: Supermicro PSU replacement guides, DLC system power protocols.
質問 # 32
What 2 add-on component(s) are located inside the side bracket of the SYS-421GE-TNHR2-LCC?
- A. AOM-PCIe card and GPU card
- B. AOC NIC card and PCIe card
- C. AOM-PCIe card and AOC NIC card
- D. GPU card and PCIe card
正解：C
解説：
The side bracket in the SYS-421GE-TNHR2-LCC likely houses networking or management add-ons. The AOM-PCIe card(e.g., AOM-GP401-PCIE module) andAOC NIC card(networkinterface card) are common components in Supermicro's DLC systems, enhancing connectivity (e.g., high-speed NICs for AI workloads).
A (GPU/PCIe) mixes unrelated categories, C pairs an AOM with a GPU (less likely), and D (AOC/PCIe) lacks specificity. B aligns with Supermicro's DLC networking focus, making it correct.References:
Supermicro add-on card specs, DLC system networking components.
質問 # 33
What is the color of the PCIe tray's air shroud?
- A. Black
- B. Opaque
- C. White
- D. Clear
正解：A
解説：
The air shroud in Supermicro systems, including those with Direct Liquid Cooling (DLC) solutions like the SYS-421GE-TNHR2-LCC, is typically designed to direct airflow (or in hybrid systems, assist with liquid cooling efficiency) and is made of plastic or composite materials. Based on Supermicro's standard design practices seen in technical documentation and product images (e.g., SYS-420GP-TNAR, a similar GPU server with DLC), the PCIe tray's air shroud is consistently black. This color aids in heat absorption and dissipation, aligning with Supermicro's focus on thermal efficiency in DLC systems, where cold plates and coolant distribution units (CDUs) manage heat directly at the chip level. White or clear shrouds are less common due to aesthetic and thermal considerations, and "opaque" is not a specific color designation. Thus, black is the correct choice, reflecting Supermicro's engineering standards for high-performance computing components.
References:Supermicro product images and manuals (e.g., SYS-420GP-TNAR User Manual), general DLC solution descriptions.
質問 # 34
......
正真正銘のベスト資料SDLCSAオンライン練習試験：https://jp.fast2test.com/SDLCSA-premium-file.html