最新の2022年10月 HP HPE2-T37問題集で更新された81問あります [Q33-Q51]

最新の2022年10月 HP HPE2-T37問題集で更新された81問あります

PDF無料ダウンロードにはHPE2-T37有効な練習テスト問題

HP HPE2-T37 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Architect and design a data center management solution using the HPE OneView
トピック 2	Manage and report on Hybrid IT infrastructure using HPE OneView
トピック 3	Monitor and troubleshoot common Hybrid IT infrastructure issues using HPE OneView

質問 33
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.

正解:

解説:

質問 34
Which statement about server hardware types is true?

A. Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination
B. Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems
C. The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView
D. Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers

正解: D

質問 35
How will setting the Purpose field within the network definition of a server profile impact the network traffic?

A. network purpose does not affect the behavior of the network
B. network purpose will impact the traffic only if Virtual Connect modules are used
C. network purpose can give higher priority for a specific type of traffic
D. network purpose will define QoS within Logical Interconnect

正解: D

質問 36
What is required to add remote frame link topology to HPE OneView?

A. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
B. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
C. Management ports of the remote frame link topology must be connected to the management LAN.
D. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.

正解: C

質問 37
Click option that will allow you to select a FlexNIC function for the specified connection.

正解:

解説:

質問 38
You need to make sure that server ports connected to this network cannot communicate with each other within the logical interconnect. Click the option within the network definition that will allow you to configure the required parameter.

正解:

解説:

質問 39
You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?

A. A snapshot for imported volumes can be created only by using array management tools
B. Imported volumes are treated as private volumes and can be only used as boot volumes
C. Volumes imported to HPE OneView is managed just like a volume created using HPE OneView
D. Volumes imported to HPE OneView cannot be removed using the HPE OneView interface

正解: B

質問 40
For HPE Primera, match each task with the management tool that can be used to perform it.

正解:

解説:

質問 41
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?

A. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
B. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
C. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
D. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.

正解: D

質問 42
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment

A. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
B. A Rack Management Controller must be added to HPE OneView.
C. HPE Superdome Flex complex can be added by adding base chassis of this complex.
D. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.

正解: B

質問 43
Which statement about a server profile for an Apollo system is true?

A. Virtual WWNs and MAC addresses can be defined
B. Fibre Channel connections can be defined
C. UEFI optimized is the only available boot mode
D. Enclosure Group Is automatically selected

正解: A

質問 44
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?

A. Create a support dump for the appliance and for all managed logical interconnects
B. Disable HPE Remote Support at toe HPE OneView appliance level
C. Put all servers managed through HPE OneView to maintenance state
D. Run the Update Readiness checker tool to evaluate HPE OneView health status

正解: D

質問 45
What is the best practice when deploying an HPE OneView appliance?

A. Deploy two HPE OneView appliances and configure them in HA mode.
B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
D. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.

正解: B

質問 46
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?

A. to provide static IP addresses to IL0 and interconnect modules if applicable
B. to provide static IP addresses for storage systems managed in HPE OneView
C. to provide static IP addresses for Logical Interconnects and Logical Enclosures
D. to provide static IP addresses for an operating system running on a Compute Module

正解: D

質問 47
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?

A. reset BIOS settings to the defaults so UEFI settings can be applied
B. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
C. reset an il_0 management processor to activate the new boot mode for the server
D. reset BIOS settings to the defaults through the server profile after changing the boot mode

正解: C

質問 48
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

正解:

解説:

質問 49
Your workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?

A. Set a specific workload profile using IL0 interface for each individual server.
B. Set a specific workload profile for all managed servers as an HPE OneView global setting.
C. Set a specific workload profile within server profile template and update all profiles.
D. Set a specific workload profile within Logical Interconnect Group and update all servers.

正解: C

質問 50
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.