最新の[2021年12月23日] 実際に出る検証済みのHPE6-A79問題集 [Q22-Q40]

最新の[2021年12月23日] 実際に出る検証済みのHPE6-A79問題集

合格させるHP HPE6-A79試験更新されたのは56問があります

HP HPE6-A79 認定試験の出題範囲：

トピック	出題範囲
トピック 1	WLANインフラストラクチャ全体を分析してライセンス要件を決定します顧客の要件を分析してQoSの必要性を判断します
トピック 2	ゲストWLANを構成し、クライアント接続を検証しますマルチゾーンソリューションを構成して検証します AirWaveでトリガーとカスタムレポートを作成します
トピック 3	リモートアクセス用のコントローラーへのIAP-VPNを構成および検証しますシナリオを分析してAirWaveのスケーラビリティ要件を決定します
トピック 4	複雑で可用性の高いマルチコントローラー環境を分析してモビリティ要件を決定します機能要件を分析してソリューションの設計と実装計画を作成します
トピック 5	役割の導出のためにWPA2 PSKMac認証を使用してWLANを構成します複雑なマルチサイト高可用性モビリティ環境を構成および検証します
トピック 6	AirWaveとモビリティマスターを使用して、クライアントの状態に関する情報を収集します役割の派生を構成し、既存のAAAサーバーと統合します
トピック 7	クライアント接続とネットワークアクセスのトラブルシューティング安全なWLANへのクライアント接続を検証する
トピック 8	音声とビデオの最適化をサポートするようにWLANを構成および検証します WLANインフラストラクチャ全体を分析してアーキテクチャ要件を決定します
トピック 9	モビリティコントローラでスペクトラムアナライザダッシュボードを監視する安全なWLANを設定し、既存のインフラストラクチャと統合する
トピック 10	デバイスをAirWaveと統合および監視し、RF環境を監視および最適化します
トピック 11	高度なサービスとセキュリティソリューションを実装するシナリオを分析してリモートアクセス要件を決定する
トピック 12	顧客の要件を分析してマルチゾーン展開の必要性を判断する顧客の要件を分析して役割、ファイアウォールポリシー、およびルールの要件を判断する

質問 22
Refer to the exhibit.

A network administrator has a Mobility Master (MM) Mobility Controller (MC) architecture along with the MC in the DMZ for terminating RAPs. The network firewall has been provisioned to allow access to the MC in the DMZ for both UDP 500 and 4500. Then he proceeds to provision an AP as shown in the exhibit.
Which additional configuration steps must the administrator to assure RAPs successfully contact the MC? (Choose two.)

A. Create the RAP1 account in the InternalDB of the MM.
B. Create an IP local pool and PSK at the device node level.
C. Add the RAP1 entry in the CPsec whitelist at the MM level.
D. Create an IP local pool and PSK at the /mm/mynode level.
E. Create the RAP1 account in the InternalDB of the MC.

正解: C,D

質問 23
Refer to the exhibit.

An Aruba network is deployed with L2 and L3 Mobility Master (MM) redundancy across two datacenters, as shown in the exhibit. The network administrator confirms that all Mobility Controllers (MC) are currently communicating with MM1, which is the L2 Active and, L3 Primary.
Which MM IP will MCs communicate with if MM1 fails?

A. 10.1.1.12
B. 10.2.1.21
C. 10.1.1.10
D. 10.2.1.10

正解: D

質問 24
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server.
What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)

A. Manually add each MM. MC and Access Point in the AMP server.
B. Move "New" devices into a group and folder in Airwave.
C. Set the AMP's IP address and Org string as DHCP option 43.
D. Manually add the Active MM and wait for automatic Discovery.
E. Map the AMP's IP address with a mgmt-config profile in the MM.

正解: D,E

質問 25
A company plans to build a resort that includes a hotel with 1610 rooms, a casino, and a convention center. The company is interested in a mobility solution that provides scalability and a service-based approach, where they can rent the WLAN infrastructure at the convention center to any customer (tenant) that hosts events at the resort.
The solution should provide:
* Seamless roaming when users move from the hotel to the casino or the convention center
* Simultaneous propagation of the resort and customer-owned SSIDs at the convention center
* Null management access upon resort network infrastructure to the customers (tenants)
* Configuration and monitor rights of rented SSIDs to the customers (tenants) Which deployment meets the requirements?

A. Deploy an MM-MC infrastructure, and create different hierarchy groups for MCs and APs
B. Deploy lAPs. and manage them with different central accounts.
C. Deploy lAPs with zone based SSIDs and manage them with different central accounts.
D. Deploy lAPs along with AirWave. and deploy role-based management access control.
E. Deploy an MM-MC infrastructure with multizone AP's, with one zone for tenant SSIDs.

正解: B

質問 26
Refer to the exhibits.
Exhibit 1

Exhibit 2

A network administrator adds a new Mobility Controller (MC) to the production Mobility Master (MM) and deploys APs that start broadcasting the employee SSID in the West wing of the building. Suddenly, the employees report client disconnects. When accessing the MM the network administrator notices that the MC is unreachable, then proceeds to access the MC's console and obtains the outputs shown in the exhibits.
What should the network administrator do next to solve the current problem?

A. Open a TAC case and send the output of tar crash.
B. Verify the license pools in the MM.
C. Decommission the MC from the MM, and add it again.
D. Kill two zombie processes then reboot the MC.

正解: B

質問 27
Refer to the exhibit.

A network engineer deploys two different DHCP pools in an Instant AP (IAP) cluster for WLANs that will have connectivity to a remote site using Aruba IPSec.
Based on the output shown in the exhibit, which IAP-VPN DHCP modes are being used?

A. centralized L3 and distributed L2
B. local L3 and distributed L2
C. distributed L3 and centralized L2
D. local L3 and centralized L2

正解: A

質問 28
Refer to the exhibit.

A network administrator is validating client connectivity and executes the show command shown in the exhibit. Which authentication method was used by a wireless station?

A. EAP authentication
B. MAC authentication
C. 802.1X user authentication
D. 802.1X machine authentication

正解: C

質問 29
A company with 535 users deploys an Aruba solution with more than 1000 Aruba APs, two 7220 Mobility Controllers, and a single Mobility Master (MM) virtual appliance at the campus server farm. The MCs run a HA Fast failover group in dual mode and operate at 50% AP capacity.
If there is an MM or MC failure, the network administrator must ensure that the network is fully manageable and the MC load does not exceed 80%.
What can the network administrator do to meet these requirements?

A. Enable oversubscription in the HA group.
B. Add an MM and enable DC redundancy.
C. Add an MC and an MM in the server farm.
D. Create a cluster with AP load balancing.
E. Place the APs in two different AP-Groups.
F. Place the APs in the same hierarchy level.

正解: B

質問 30
Refer to the exhibits.
Exhibit 1

Exhibit 2

A network administrator integrates a current Mobility Master (MM) - Mobility Controller (MC) deployment with a RADIUS server to authenticate a wireless user, the network administrator realizes that the client machine is not failing into the it_department role, as shown the exhibits.
Which configuration is required to map the users into the proper role, based on standard attributes returned by the RADIUS server in the Access Accept message?

A. aaa server-group Corp-Network
set role condition Filter-Id equals it_department set-value it-role
B. aaa server-group Corp-employee
set role condition Filter-Id equals it-role set-value it_department
C. aaa server-group Corp-Network
set role condition Filter-Id equals it-role set-value it_department
D. aaa server-group Corp-employee
set role condition Filter-Id value-of
E. aaa server-group ClearPass
set role condition Filter-Id equals it_department set-value it-role

正解: B

質問 31
Refer to the exhibit.

Based on the output shown in the exhibit, with which Aruba devices has Access-1 established tunnels?

A. a single standalone MC
B. a pair of MCs within a L3 cluster
C. a pair of standalone MCs
D. a pair of switches running VXLAN

正解: B

質問 32
Refer to the exhibit.

A network administrator is evaluating a deployment to validate that a user is assigned the proper role and reviews the output in the exhibit. How is the role assigned to user?

A. The MC assigned the default role based on the authentication method.
B. The MC assigned the machine authentication default user role.
C. The MC assigned the role based on Aruba VSAs.
D. The MC assigned the role based on server derivation rules.

正解: A

質問 33
Refer to the exhibits.

A network administrator has fully deployed a WPA3 based WLAN with 802.1X authentication. Later he defined corp-employee as the default user-role for the 802.1X authentication method in the aaa profile. When testing the setup he realizes the client gets the "guest" role.
What is the reason "corp-employee" user role was not assigned?

A. The administrator forgot to enable PEFNG feature set on the Mobility Master.
B. The administrator forgot to map a dotlx profile to the corp-employee aaa profile.
C. The Mobility Master lacks MM-VA licenses; therefore, it shares partial configuration only.
D. MC 1 has not received the configuration from the mobility master yet.

正解: D

質問 34
A network administrator has updated the ArubaOS code of a standalone Mobility Controller (MC) that is used for User-Based Tunneling (UBT) to a newer early release. Ever since the MC seems to reject PAPI sessions from the switch with the 10.1.10.10 IP address. Also the controller's prompt is now followed by a star mark: "(MC_VA) [mynode] *#" When opening a support ticket, an Aruba TAC engineer asks the administrator to gather the crash logs and if possible replicate UBT connection attempts from the switch while running packet captures of PAPI traffic on the controller and obtain the PCAP files. The administrator has a PC with Wireshark and TFTP server using the 10.0.20.20 IP address.
What commands must the administrator issue to accomplish these requests? (Choose two.)

A. Option D
B. Option A
C. Option E
D. Option B
E. Option C

正解: C,D

質問 35
A customer wants a WLAN solution that permits Aps to terminate WPA-2 encrypted traffic from different SSIDs to different geographic locations where non-related IT departments will take care of enforcing security policies. A key requirement is to minimize network congestion, overhead, and delay while providing data privacy from the client to the security policy enforcement point. Therefore, the solution must use the shortest path from source to destination.
Which Aruba feature best accommodates this scenario?

A. Inter MC GRE tunnels
B. Inter MC S2S IPsec tunnels
C. VIA
D. Multizone Aps
E. RAPs

正解: E

質問 36
Users run encrypted Skype for Business traffic with no WMM support over an Aruba Mobility Master (MM) - Mobility Controller (MC) based network. When voice, video, and application sharing traffic arrive at the wired side of the network, all the flows look alike due to the lack of L2 and L3 markings How can the network administrator identify these flows and mark QoS accordingly?

A. Confirm the MM is the Openflow controller of the MCs and Openflow is enabled in VAP and the firewall roles. Then integrate the MM with the Skype4Business SDN API. and enable the Skype4Business ALG in the UCC profiles.
B. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then enable WMM in a VAP profile.
C. Use a media firewall policy that match these three flows, and use permit and TOS actions with 56, 40, and 34 values for voice, video, and application sharing, respectively Then enable the Skype4Business ALG in the UCC profiles.
D. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then enable the Skype4Business ALG in the UCC profiles.

正解: A

質問 37
A fully functional WLAN is deployed in a campus network using the following script.

Which part of the script can a network administrator re-use to assign a different default role to users when they connect to the same SSID in a second building?

A. server group and VAP
B. server group and VAP profile
C. server group and ssid profile
D. server group, aaa profile, and ssid profile

正解: C

質問 38
Refer to the exhibit.

A network administrator deploys a new Mobility Master (MM) - Mobility Controller (MC) network. To test the solution, the network administrator accesses the console of a pair of APs and statically provisions them. However, one of the APs does not propagate the configured SSIDs. The network administrator looks at the logs and sees the output shown in the exhibit.
Which actions must the network administrator take to solve the problem?

A. Re-provision the AP with a different group, and modify the name of one AP in the whitelist.
B. Re-provision one of the APs with a different name, and add new entries with the proper group in the whitelist.
C. Re-provision one of the APs with a different name or modify the name in the whitelist.
D. Create another AP group in the MC's configuration, and re-provision one AP with a different group.

正解: C

質問 39
Refer to the exhibit.

Based on the output shown in the exhibit, which channel offers the highest quality?