最上級のHQT-4180試験問題Hitachiテスト最高成績で最速合格をゲットせよ！
試験準備には最適なHQT-4180試験問題2023年最新のHitachi Vantara Qualified Professional究極な37問があります
質問 # 17
What are two functions of the LAN Blade in the VSP Midrange family? (Choose two.)
- A. It provides the management port connecting to the customer LAN.
- B. It provides the maintenance port connecting to the MPC.
- C. It provides the LAN connection to the file module.
- D. It provides the iSCSI connection to the servers.
正解：A、C
質問 # 18
You need to replace a failing power supply (PS) in a VSP E590.
What is the correct procedure?
- A. Use the MPC for blocking the PS, then replace it.
- B. Use the Maintenance Utility for blocking the controller, then replace the PS.
- C. Check if the status of the PS is blocked, and if yes, then replace it directly.
- D. Use the Maintenance Utility for blocking the PS, then replace it.
正解：A
質問 # 19
A customer wants to change a production RAID group from RAID 5 (7D+1P) to RAID 6 (6D+2P) on a VSP G600 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?
- A. The RAID 5 group must be put into DRU mode in Storage Navigator.
- B. The RAID level must be changed in Storage Navigator.
- C. The RAID level in the SVP Maintenance window must be changed.
- D. Parity groups must be deleted.
正解：D
質問 # 20
Which tool is used for the remote monitoring of a VSP N800 system?
- A. Hitachi Remote Ops Monitor Agent
- B. Hitachi Performance Monitor
- C. Hitachi Remote Ops SVP Agent
- D. MPC Software
正解：A
質問 # 21
A customer wants to upgrade a VSP G700 to 512 GB RAM capacity.
What is the valid CFM configuration?
- A. two BM45 per controller
- B. two BM35 per controller
- C. one BM45 per controller
- D. two BM35 per system
正解：A
質問 # 22
You are installing a VSP F370 and you need to connect your laptop to one of the controllers.
What are the two default IP addresses of the maintenance ports of CTL1 and CTL2? (Choose two.)
- A. 192.168.0.16
- B. 10.0.0.17
- C. 192.168.0.17
- D. 10.0.0.16
正解：A、D
質問 # 23
You need to replace a broken disk drive on a VSP G700.
What are two prerequisites? (Choose two.)
- A. You must use the Replace button in the Maintenance Utility before removing the drive.
- B. The red LED on the drive must be lit.
- C. You must wear a wrist strap for ESD protection.
- D. The Drive Box where the drive is located must be powered down.
正解：A、C
質問 # 24
A customer wants to upgrade their VSP E790 with a SAS Expansion feature.
What are three requirements? (Choose three.)
- A. In Shared Memory, the Extension1 has to be enabled.
- B. The SAS Expansion license has to be installed.
- C. Slots B of both controllers must be available for DKB installation.
- D. Drive Boxes (DBs) with SAS interface have to be added.
- E. Two additional Disk Boards (DKBs) have to be installed.
正解：B、D、E
質問 # 25
A customer has a VSP G370 with the encryption license key installed. They now want to have all the DP-Volumes of a certain pool located on encrypted RAID Groups.
What are two requirements? (Choose two.)
- A. The RAID Groups in the pool must be formatted with encryption enabled.
- B. The RAID level of RAID Groups in the pool must be RAID 6.
- C. At least 20 GB of Shared Memory must be installed.
- D. The controller board must support encryption.
正解：A、D
質問 # 26
What is the maximum size of a basic volume carved out from an internal parity group on a VSP E590 system?
- A. 128 TB
- B. 65 TB
- C. 1 TB
- D. 2.99 TB
正解：D
質問 # 27
You need to upgrade the firmware on a VSP G700.
Which file must you select to perform the upgrade using the Maintenance Utility?
- A. All Firmware.mda
- B. setup.exe
- C. HA-MPC-xx.iso
- D. HA-SVP-xx.iso
正解：D
質問 # 28
Which program is used to perform the "New Installation" procedure on a VSP midrange system?
- A. Webconsole
- B. GUM
- C. BECK
- D. MPC
正解：B
質問 # 29
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.) Choose 2 answers
- A. adding a DKB
- B. upgrading from G200 to G800
- C. upgrading from G200 to G600
- D. adding a DB60 drive tray
正解：A、D
質問 # 30
Which program is used to perform the "New Installation" procedure on a VSP F700 system?
- A. Hitachi Ops Center Administrator
- B. MPC connected to the maintenance LAN port
- C. raidcom CLI
- D. SVP Web console
正解：A
質問 # 31
......
注目のHQT-4180豪華セット試験ガイドで最速合格を目指そう：https://jp.fast2test.com/HQT-4180-premium-file.html
HQT-4180試験ガイド豪華セットで最速合格を目指そう：https://drive.google.com/open?id=1oSAVxnhN52Fgo31M8mcY0AZbpE83HfFz