更新されたのは2022年09月は100%カバー率でQV12SAリアルな試験問題で100%合格保証
実際問題を使おうQlik問題集で100%無料で使えるQV12SA試験問題集
Qlik QV12SA 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
質問 10
There is a QlikView document with separate "City" and "State" fields A system administrator needs to create
separate QVW documents each with a singular "City and State" field.
Which method should the system administrator use?
- A. Loop and reduce by "City and State"
- B. Concatenate "City" and "State" then loop and reduce by "City and State"
- C. Loop and reduce by "City" only
- D. Concatenate "City" and "State" then loop and reduce by "City and State" bookmark
正解: C
質問 11
A QlikView developer hasbeen assigned a Named User CAL.The developer is testing the same QlikView
document on two different web browsers simultaneously. When switching between browsers and opening the
AccessPoint this error message displays: Lost connection toserver.
The system administrator finds this message in the Qlikview Server Session log file
Killed because Named User CAL was needed fromanother client.
The administrator needs to enable the developer to test the QlikView document on two different web browsers
simultaneously
What should the administrator do?
- A. Remove any Document or Named User CALs for the user so they will use Session CALs
- B. Assign the developer a Document CAL for the duration of the testing
- C. Assign the developer a Local QlikView Desktop license
- D. Instruct the developer to download the QlikView document and test locally
正解: A
質問 12
A system administrator finds this error message in the event log file
500 Warning WorkingSet: Virtual Memory is growing beyond parameters - 22.761(22.393) GB
Which is the cause of the error?
- A. QlikView Server memory is below the Low limit for the Working Set
- B. QlikView Server memory is above the Cache limit for the Working Set
- C. QlikView Server memory is above the Low limit for the Working Set
- D. QlikView Server memory is above the High limit for the Working Set
正解: D
質問 13
A system administrator reviews the Status > Tasks tab in the QlikView Management Console which displays a
failed reload task.Which two logs are needed to troubleshoot the problem? (Select two )
- A. QlikView WorkOrder Log
- B. QlikView Root Log
- C. QlikView Document Log
- D. QlikView Server Event Log
- E. QlikView Task Log
正解: D,E
質問 14
A system administrator receives reports that assigned CALs have disappeared Which file should the system
administrator restore from backup?
- A. Meta file
- B. Settings.ini
- C. PGO file
- D. LEF
正解: B
質問 15
A user needs access to a QlikView document for which security is controlled using Section Access.
A system administrator adds the user to the data source that is loaded into the Section Access table of the
QlikView document.
However the user is still unable to access the QlikView document.
What should the administrator do?
- A. Create a task configured to reduce the data and then distribute the QlikView document to the user
- B. Reload and distribute the QlikView document
- C. Restart the QlikView Directory Services Connector service
- D. Add the user to the QlikView Administrators group
正解: A
質問 16
A system administrator needs to deliver QlikView Data (QVD) files to developersto create new QVW files.
The QlikView deployment includes QlikView Publisher.
How should the administrator meet this requirement?
- A. Use the QVD Creation feature on the Supporting Tasks QMC page to create a new QVD file then
distribute the QVD to the developers - B. Use the Database Command feature on the Supporting Tasks QMC page to create a new QVD file then
distribute the QVD to the developers - C. Create a new QVW that includes the STORE command in the load script, then configure a
reload/distribution task from this - D. Add the STORE command to the load script in an existing QVW file, then provide the QVD location to
the developers
正解: B
質問 17
A system administrator is configuring a two node QlikView Server cluster and will install QlikView Publisher
on its own separate node.The configuration of services is as follows:
Node A QlikView Server service, QlikView Management service Node B QlikView Server service, QlikView
Management service Node C QlikView Distribution service QlikView Settings service QlikView Directory
Service Connector service.
Which part of this configuration does NOT conform to best practices?
- A. Running the QlikView Distribution service and the QlikView Directory Service Connector service on
the same node - B. Running twosimultaneousQlikView Management services on separate nodes
- C. Running the QlikView Server service and QlikView Management service on the same node
- D. Running twosimultaneousQlikView Server services on separate nodes
正解: B
質問 18
All QlikView Server services are installed and configured to run on a single Windows server QlikView
Publisher tasks fail intermittently, and the document log appears to stop processing without any error
notifications.
To troubleshoot the issue, a Windows Performance Monitor set was configured and shows that the QVS.exe
system RAM usage is extremely high QlikView Publisher reload tasks schedule cannot be altered
Which three steps should the system administrator take to resolve the problem? (Select three )
- A. Increase the Windows server system RAM
- B. Decrease the Working Set Low to make sure enough system RAM is available for QlikView Publisher
to function - C. Increase the Windows server pagefile sys size
- D. Edit the QlikView Publisher tasks so the distribution is set to All Authenticated Users instead of Named
Users - E. Migrate QlikView Distribution Service to a separate Windows server
正解: B,C,D
質問 19
End users report they are unable to reach the AccessPoint. The system administrator investigates the problem
and determines the QlikView Web Server cannot be started because another non-QlikView service is using
port 80. The system administrator needs to resolve the problem without affecting the non-QlikView service
What should the system administrator change in the QlikView Management Console?
- A. Set the port number for the QlikView Web Server in the Communication section to 8080
- B. Set the port number for the QlikView Server in the Location section to 8080
- C. Set the port number for the QlikView Web Server in the Communication section to 4750
- D. Set the port number for the QlikView Server in the Location section to 4747
正解: C
質問 20
A QlikView deployment contains two clustered QlikView Servers.
The QlikView Web Server Service (QVWS) has been installed on a different server than the QlikView Server
services However the QlikView Web Server fails to start.
Which are two outcomes of this failure? (Select two.)
- A. The QlikView Management Console can no longer be accessed by the system administrator
- B. The QlikView Servers can no longer hold QlikView documents in RAM
- C. The load balancing method for the QlikView Servers cannot be changed
- D. The AccessPoint displays the message: No web server
- E. Users cannot access the AccessPoint
正解: A,B
質問 21
A system administrator is increasing the amount of system RAM from 128 GB to 256 GB The QlikView
Server Working Set Low and Working Set High are currently configured with the default values of 70% and
90%.
How should the administrator ensure the QlikView Server performance is optimized?
- A. Increase the Working Set Low value only
- B. Decrease both the Working Set Low and Working Set High values
- C. Decrease the Working Set High value only
- D. Increase both the Working Set Low and Working Set High values
正解: D
質問 22
A system administrator creates a task for a QlikView document with Section Access implemented. The
administrator enters the correct values into the Data Protection fields to allow the QlikView service account to
reload the file. When the task runs, it fails to reload the QlikView document
The administrator finds this error message in the QlikView distribution log file:
Error: Document open call failed.The document might require username and password.
What should the administrator do to resolve the task failure?
- A. Ensure the QlikView service account has file permissions to read the QlikView document
- B. Enter an administrator username and password that is part of the Section Access
- C. Add the QlikView service account to Section Access in the QlikView document
- D. Validate the QlikView service account username and password are correct in the task
正解: D
質問 23
Business users report QlikView documents are having intermittent performance issues Users sometimes
receive warnings related to memory. The system administrator finds this error message in the server log
files:WorkingSet: Virtual Memory is growing beyond parameters
Which three steps should the administrator take to diagnose andfix this issue? (Select three.)
- A. Monitor the memory usage on the server that runs the QlikView Server services, and increase memory
resources if needed - B. Ask the user to restart the client and/or browser, and try again
- C. Review the Working Set High/Low values for QlikView Server in the QlikView Management Console
- D. Increase the amount of free disk space on the server that runs the QlikView Server services
- E. Ask the document owner to optimize the data model and memory usage of sheet objects in the document
正解: A,C,E
質問 24
A system administrator needs to evaluate the CAL utilization in their organization Which tool should the
administrator use?
- A. The License Monitor application
- B. The CALs tab in the QMC
- C. The QVS Statistic^ window in the QMC
- D. The Governance Dashboard
正解: B
質問 25
A system administrator needs to add resilience redundancy and increase capacity of a QlikView Distribution
Service (QDS) What should the administrator do?
- A. Install license and configure additional QlikView Server nodes in a QlikView Server Cluster
- B. Add more free disk space to the server running the QDS
- C. Install, license and configure additional QDS nodes in a QDS Cluster
- D. Add more CPU and memory resources to the server running the QDS
正解: C
質問 26
A system administrator receives reports from end users that the AccessPoint is down, and after checking the
QlikView Webserver service, the system administrator finds that it has stopped. When attempting to start the
QlikView Webserver service, this error message displays:
The QlikView Webserver service on local computer started and then stopped- Some services stop
automatically if they are not in use by other services or programs.
Which two ports may be the cause of the issued (Select two )
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
正解: C,E
質問 27
A system administrator tests a QlikView Server deployment to confirm connectivity between a web browser
and the QlikView Server The test fails because connectivity to the AccessPoint maintains a loading content
state. All QlikView services are running properly and there are NO error messages in any log files.
What should the administrator do to correct the problem?
- A. Register ASP net 4.x on the server running IIS and QlikView web components
- B. Stop and start I IS to reset connectivity between the QlikView web components and the QlikView
Server - C. Stop and start the QlikView Webserver service to reset the QlikView web configuration
- D. Set the QlikView IIS application pool identity to the local Administrator account
正解: B
質問 28
A system administrator looks in the QMC > Status >QVS StatisticsNo documents are open in the QlikView
Server but the memory usage of the QlikView Server (QVS) process is still above 10 GB.
Which is the cause of this behavior?
- A. A reload is currently running that uses memory in the QlikView Server until it is finished
- B. Cached data for unloaded documents remains in memory to decrease calculation time
- C. The Object Calculation Time Limit is too high, which causes the hypercube cache to stay for too long
- D. The Document Timeout setting is too high, which causes documents to never time out and unload
正解: B
質問 29
The QlikView Distribution Service fails to allocate a QlikView Batch (QVB) engine.The system administrator
needs to monitor the QlikView Publisher for 24 hours to determine if the current QlikView Publisher schedule
has over-allocated QVB engines.
Which two tools should the administrator use? (Select two )
- A. HTTP Watch
- B. Microsoft Performance Monitor
- C. Microsoft Task Manager
- D. QlikView Governance Dashboard
- E. Wireshark
正解: C,D
質問 30
When configuring QlikView Server to integrate with Microsoft IIS which QlikView service should be
installed on the Microsoft IIS server?
- A. QlikView Redirect Service
- B. QlikView Publisher Service
- C. QlikView Webserver Service
- D. QlikView Settings Service
正解: C
質問 31
......
QV12SA問題集PDFでQV12SAリアル試験問題解答：https://jp.fast2test.com/QV12SA-premium-file.html