更新されたのは2022年03月25日認定試験DES-1221問題集で練習テスト問題
更新された検証済みのDES-1221問題集と解答で合格保証もしくは全額返金
質問 31
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
- A. SMB
- B. NTP
- C. UDS
- D. LDAP
正解: A
解説:
Explanation/Reference: https://www.dell.com/support/article/en-pk/sln317202/powerstore-alerts-smb-server-alerts?
lang=en
質問 32
What is the total number of NVRAM devices used in PowerStore 3000?
- A. Up to 21
- B. 0
- C. Up to 6
- D. 1
正解: D
解説:
Reference: https://volumes.blog/2020/05/05/whats-is-powerstore-part-2-hardware/#:~:text=On%20the%
20PowerStore%201000%20and,(2)%20NVMe%20NVRAM%20devices.&text=PowerStore%20supports%
20four%20types%20of,in%20specific%20locations%20and%20enclosures.
質問 33
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
- A. Whether the appliance is online
Appliance failure status
Cluster utilization - B. Whether the Node is offline
Appliance failure status
Node utilization - C. Whether the appliance is offline
Appliance failure status
Capacity utilization - D. Whether the Cluster is offline
Node failure status
I/O utilization
正解: C
解説:
Explanation/Reference: https://volumes.blog/2020/05/18/what-is-powerstore-part-11-resource-balancer/
質問 34
Refer to the Exhibit.
A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?
- A. Port 54 needs to be enabled
- B. Dedicated port needs to be used for discovery network
- C. Port 54 has not been set to trunk mode
- D. Discovery network uses only native VLAN
正解: D
質問 35
Refer to the Exhibit.
What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?
- A. Thin clone 3 becomes parent
- B. Thin clone 3 has an empty parent
- C. Snapshot 3 becomes the parent
- D. Thin clone 1 becomes parent
正解: B
質問 36
What describes the remote replication Failover operation?
- A. It is run from the replication source system by the administrator in the event of an outage on the system
- B. It is run automatically by the replication source system in the event of a source system outage
- C. It is run automatically by the replication destination system in the event of a source system outage
- D. It is run from the replication destination system by the administrator in the event of a source system outage
正解: D
解説:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-protect-data/replication?guid=guid-
7641aeec-982e-4e4e-85fb-c50f525635db&lang=en-us
質問 37
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects. Which action could resolve the issue?
- A. Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group
- B. Implement VLT and Dynamic Link Aggregation Group
- C. Configure VLT and Link Aggregation Control Protocol
- D. Implement Dynamic Link Aggregation Group
正解: C
解説:
Reference: https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/storage/h18157- dell-emc-powerstore-clustering-high-availability.pdf
質問 38
A PowerStore X system is being implemented using Dell EMC S5248F-ON Ethernet switching as data switches.
What is required when configuring the VLT interconnects on the data switches?
- A. Configure the VLT MACs with a matching unique made-up address
- B. On each switch, select the switch management port MAC as the VLT MAC
- C. Assign the switch default route for the VLT traffic
- D. Set the VLT connection to the switch default VLAN
正解: A
質問 39
A PowerStore X system is being implemented using Dell EMC S5248F-ON Ethernet switching as data switches.
What is required when configuring the VLT interconnects on the data switches?
- A. On each switch, select the switch management port MAC as the VLT MAC
- B. Assign the switch default route for the VLT traffic
- C. Configure the VLT MACs with a matching unique made-up address
- D. Set the VLT connection to the switch default VLAN
正解: A
質問 40
Refer to the Exhibit.
A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?
- A. Port 54 needs to be enabled
- B. Dedicated port needs to be used for discovery network
- C. Port 54 has not been set to trunk mode
- D. Discovery network uses only native VLAN
正解: D
質問 41
Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?
- A. SOAP
- B. REST
- C. VAAI
- D. VASA
正解: D
解説:
Explanation
VASA is a VMware-defined API meant to provide a common way for VMware to integrate with storage vendors. The API is implemented using an out-of-band, Simple Object Access Protocol (SOAP) over HTTPS.
Reference: https://volumes.blog/2020/05/06/what-is-powerstore-part-4-vvols/
質問 42
Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?
- A. Four 1 GbE
- B. Two 25 GbE
- C. Two 10 GigE
- D. Two 100 GigE
正解: B
質問 43
Use the PowerStore Manager simulator to configure the BaseEnclosure-NodeA-IoModule1-FEport0 as a replication port. When you have finished using the simulator, Click Next.
正解:
解説:
Below are the exhibits solution for this simulation.








質問 44
Match the CLI command to the appropriate configuration.
正解:
解説:
質問 45
An administrator received a request to provision a new volume. Use the simulator to provision a volume of 50 GB with a performance policy of high for their host named "ApplicationTeam". When you have finished using the simulator, click Next.
正解:
解説:
Below are the exhibits solution for this simulation.






質問 46
Refer to the Exhibit.
A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?
- A. Dedicated port needs to be used for discovery network
- B. Port 54 needs to be enabled
- C. Discovery network uses only native VLAN
- D. Port 54 has not been set to trunk mode
正解: A
質問 47
When planning rack layout, why should base enclosures be grouped together?
- A. Rack weight balance
- B. Power distribution requirements
- C. Ease of cable management
- D. Hot aisle requirement
正解: B
質問 48
A storage administrator has provisioned 10 * 2GB volumes. 400MB of data is written to each of the ten volumes. What is the Thin Savings ratio for this configuration?
- A. 5:1
- B. 6:1
- C. 4:1
- D. 3:1
正解: A
質問 49
An administrator received a request to provision a new volume. Use the simulator to provision a volume of
50 GB with a performance policy of high for their host named "ApplicationTeam". When you have finished using the simulator, click Next.
正解:
解説:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.






質問 50
......
試験エンジンはDES-1221試験無料お試しサンプル365日更新されます:https://jp.fast2test.com/DES-1221-premium-file.html
DES-1221のPDF問題とテストエンジンには62問があります:https://drive.google.com/open?id=1K6n4SFucB7VL030NVz-uA3yNRLSnmoW7