問題集は全額返金保証付きの300-815問題集最大50%オフ
更新されたのは2025年04月合格させる300-815試験にはリアル練習テスト問題
Cisco 300-815認定試験は、Cisco Unified Communications Managerと協力し、高度なコールコントロールとモビリティサービスの知識とスキルを拡大したいITプロフェッショナルに最適です。この認定は、潜在的な雇用主に専門知識を実証し、その分野でのキャリアを促進したい個人にとっても有益です。
質問 # 30
Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)
- A. Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster.
- B. The maximum number of callers allowed in queue must be 10.
- C. A unicast music on hold audio source must be configured.
- D. The phone button template must have the Queue Status Softkey configured.
- E. Cisco RIS data collector service must be running on the same server as the Cisco CallManager service.
正解：A、E
解説：
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/ cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide- 1201_chapter_01001101.html#CUCM_RF_C960BC9A_00
質問 # 31
Refer to the exhibit. How many maximum hops does an ILS update traverse?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 32
Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?
- A. System > Location Info
- B. System > Device Pool
- C. Call Routing > Emergency Location > Emergency Location (ELIN) Groups
- D. Call Routing > Route/Hunt > Local Route Group Names
正解：B
解説：
Use the System > Device Pool menu option in Cisco Unified Communications Manager Administration to configure the Local Route Group setting for the device pools in the Cisco Unified Communications Manager implementation.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_ F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_0100110.html#CUCM_TK_CB653D2D_00
質問 # 33
Refer to the exhibit.
Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?
- A. Point the emergency pattern directly to the PSTN gateway.
- B. Adjust the service parameter T302 timet to the desired value.
- C. Check the Urgent Priority check box under 9.911 pattern.
- D. Adjust the service parameter T204 timer to the desired value.
正解：C
質問 # 34
How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?
- A. At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.
- B. At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.
- C. At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.
- D. At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.
正解：B
質問 # 35
What are the elements for Device Mobility configuration?
- A. physical location, device pool, and Device Mobility group
- B. physical location. Device Mobility group, and region
- C. device pool, Device Mobility group, and Cisco IP phone
- D. device pool, Device Mobility group, and region
正解：A
質問 # 36
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C.
Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- B. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- D. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
正解：C、D
質問 # 37
Refer to the exhibit. Regions have been configured for all major branches based on the available circuit bandwidth. Some calls from Region A endpoints to Region B endpoints are failing to connect. How is the issue resolved?
- A. Update the calling search space for affected endpoints to none.
- B. Add a media resource to transcode between available capabilities.
- C. Update all regions to 8 kbps maximum audio bitrate.
- D. Increase the number of available media termination points.
正解：B
解説：
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/200788-Call-Recording-Basic-Configuration-and-T.html
質問 # 38
In RTMT, how many concurrent trace collections can you schedule to download the trace files to an SFTP or FTP server on your network?
- A. three
- B. six
- C. five
- D. four
正解：B
質問 # 39
ABC company has decided to implement hunt groups to help distribute calls between members. In order to implement this, administrator must configure hunt list, hunt group, and line groups on Cisco UCM. Which distribution algorithms should the administrator implement?
- A. Top Down, Circular, Broadcast
- B. Top Down, Round Robin, Distribute
- C. Sequantial, Circular, Broadcast
- D. Top Down, Round Robin, Broadcast
正解：A
質問 # 40
Refer to the exhibit.
An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco Unified Communications Manager does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco Unified CM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability there is no option for Dialed Number Analyzer under the tool menu. Which two steps must be performed to resolve this issue? (Choose two.)
- A. Restart the subscriber
- B. Activate the Cisco CallManager service.
- C. Activate the Cisco Dialed Number Analyzer Server service.
- D. Activate the Cisco Dialed Number Analyzer service.
- E. Activate the Cisco Extended Functions service.
正解：C、D
質問 # 41 
Refer to the exhibit. An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer's carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)
- A. Enable Media Flow Around
- B. Enable Early Offer on the Cisco Unified Border Element.
- C. Enable Mid-Call Signaling Consumption.
- D. Enanle PRACK.
- E. Enable the supplementary-service media-renegotiate command.
正解：B、D
解説：
Section: Cisco Unified Border Element
質問 # 42
When the services key is pressed Cisco Extension Mobility does not show up.
What is the cause of the issue?
- A. Cisco Extension Mobility is not enabled in the Phone Configuration Window (Device > Phone)
- B. The phone is not subscribed to Cisco Extension Mobility Service.
- C. The URL configured for Cisco Extension Mobility is not correct.
- D. Cisco Extension Mobility Service is not running.
正解：B
質問 # 43
Refer to the exhibit.
An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully. The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule. What should the administrator configure in the Cisco Unified Border Element to fix this issue?
- A. ip prefix-list to filter the unwanted IP address
- B. access list allowing the firewall IP
- C. use of port 5061 for SIP secure
- D. bind signaling and media to the loopback interface
正解：D
質問 # 44
Which two statements are correct with respect to the Client Matter Code setting in the route pattern configuration? (Choose two.)
- A. The Client Matter Code has the option to configure Authorization Level such as in the Forced Authorization Code.
- B. The Client Matter Code feature does support overlap sending because the Cisco Unified Communications Manager can determine when to prompt the user for the code.
- C. If you check the Allow Overlap Sending check box, the Require Client Matter Code check box becomes disabled.
- D. The Client Matter Code feature does not support overlap sending because the Cisco Unified CM cannot determine when to prompt the user for the code.
- E. If you check the Allow Overlap Sending check box, you can also check the Require Client Matter Code check box.
正解：C、D
解説：
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/ CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_010000.pdf
質問 # 45
What is the relationship between partition, time schedule, and time period in Time-of-Day routing in Cisco Unified Communications Manager?
- A. A partition can have multiple time schedules assigned. A time schedule contains one or more time periods.
- B. A partition can have one time schedule assigned. A time schedule contains only one time period.
- C. A partition can have multiple time schedules assigned. A time schedule contains only one time period.
- D. A partition can have one time schedule assigned. A time schedule contains one or more time periods.
正解：A
質問 # 46
A customer has multisite deployments with a globalized dial plan. The customer wants to route PSTN calls via the gateway assigned to each site.
Which two actions will fulfill the requirement? (Choose two.)
- A. Create a route group which has all the gateways and associate it to the device pool of every site.
- B. Create one route group for each site and one global route list for PSTN calls that point to the local route group.
- C. Create a hunt group and assign it to each side route pattern
- D. Assign one route group as a local route group in the device pool of the corresponding site.
- E. Create one global route list for PSTN calls that points to one global PSTN route group.
正解：D、E
解説：
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html
質問 # 47
An engineer must route all SIP calls in the form of <user>@example.com to the SIP trunk gateway corporate local. Which two SIP route patterns can be used to accomplish this task? (Choose two.)
- A. *.*
- B. *@example.com
- C. example.com
- D. [email protected]
- E. gateway.corporate.local
正解：A、B
質問 # 48
The administrator of ABC company is troubleshooting a one-way audio issue for a call that uses
H.323 protocol (slow-start mode). The administrator requests that you provide the IP and port information of the Real-Time Transport Protocol traffic that had the one-way audio call.
You gather the H.225 and H.245 messages for one of the one-way audio calls.
Where can you find the RTP IP and port information for both sides? (Note: This call flow has not invoked any media resources like MTP or transcoders).
- A. H.245 Open Logical Channel
- B. H.245 Terminal Capability Set
- C. H.245 Open Logical Channel Ack
- D. H.225 Connect
正解：C
解説：
H245 Open Logical Channel contains only RTCP port, H245 Open Logical Channel ACk will have both RTP and RTP Port.
https://community.cisco.com/t5/collaboration-voice-and-video/h323-call-flow/ta-p/3160014
質問 # 49
......
無料ダウンロードCisco 300-815リアル試験問題：https://jp.fast2test.com/300-815-premium-file.html
あなたを合格させる試験には100%検証済みの300-815試験問題：https://drive.google.com/open?id=1NS_Oa8uJD2dicDAdSYvEXHKOtg-VovjB