合格させるJuniper JN0-451テスト問題でテストエンジンとPDFを提供中
あなたをお手軽にJN0-451試験合格させるリアルJN0-451練習問題集で更新されたのは2023年07月04日
質問 # 40
Click the Exhibit button.
Referring to the exhibit, which percentage of connection attempts failed on the access point named LD_RS_Support?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 41
RF templates are assigned to which Mist configuration object?
- A. config templates
- B. WLANs
- C. site groups
- D. sites
正解：D
解説：
Explanation
RF templates are assigned to sites in Mist configuration objects so that you can apply consistent RF settings across multiple sites in your network with ease. So, RF templates are assigned to D.sites
質問 # 42
Under which hierarchy level would you create a new site configuration?
- A. location
- B. organization
- C. access points
- D. clients
正解：B
解説：
Explanation
To create a new site configuration in Juniper Mist UI, you would do so under the organization hierarchy level.
So the correct answer is D. organization.
質問 # 43
Which Wireless Assurance SLE has classifiers of Association, Authorization, DHCP, and Internet Services?
- A. Roaming
- B. Capacity
- C. Time to Connect
- D. Coverage
正解：B
質問 # 44
You are using location-based services (LBS) at a new warehouse and placed the APs on the floor plan with the correct scale. The APs are mounted on trusses, 14 feet (4.3 meters) from the floor.
Which two actions ensure correct location accuracy in this scenario? (Choose two.)
- A. Determine the orientation of each AP.
- B. Configure the height of each AP.
- C. Install Virtual Beacons in each aisle.
- D. Disable the 2.4 GHz Wi-Fi radios to reduce interference.
正解：A、B
質問 # 45
Asset tracking using Mist-supported third-party BLE beacons has been installed in a warehouse. The BLE beacons were configured using their manufacturer-supplied configuration utility and BLE was properly configured for the site settings. When the warehouse floor plan is opened in Live View, the third-party beacons are not shown.
Which two statements describe causes for this issue? (Choose two.)
- A. Marvis was not enabled for the site.
- B. The Show assets check box has not been selected in Live View.
- C. The APs are installed at 19 feet from the floor, above the recommended 15 feet.
- D. The Locate this Client as an Asset check box has not been selected at the BLE client level.
正解：B、D
解説：
Explanation
According to the Mist documentation1, asset tracking is a service that allows you to find key assets and people with detailed analytics based on their location using Mist-supported third-party BLE beacons. To enable asset tracking, you need to configure both the BLE beacons and the Mist cloud settings.
The Show assets check box is a setting in Live View that allows you to display or hide the assets on the floor plan2. If this check box is not selected, you will not be able to see the third-party beacons on Live View.
The Locate this Client as an Asset check box is a setting at the BLE client level that allows you to treat a BLE client as an asset for location purposes3. If this check box is not selected, you will not be able to track the BLE client as an asset.
質問 # 46
Referring to the exhibit, what does the security alert indicate?
- A. An AP that is not part of the Mist Org is launching a DDoS attack on the Mist APs.
- B. An AP that is not part of the Mist Org is advertising the same SSIDs as the Mist APs.
- C. An AP that is not part of the Mist Org is operating in the same RF channel as the nearby Mist AP.
- D. An AP that is not part of the Mist Org is connected to the same wired network as the Mist APs.
正解：D
質問 # 47
A retail customer has legacy 2.4 GHz scanners that need to connect to the WLAN, but they are not connecting.
Which WLAN data rate setting is required for these devices to connect?
- A. Custom Rates
- B. High Density
- C. Compatible
- D. No Legacy
正解：C
解説：
Explanation
The Compatible WLAN data rate setting is required for legacy 2.4 GHz scanners to connect to the WLAN.
質問 # 48
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The WLAN with SSID Verizon-5G_Tuna will cause adjacent channel interference.
- B. The WLAN with SSID Eero1234 will cause adjacent channel interference.
- C. The WLAN with SSID NETGEAR24 will cause adjacent channel interference.
- D. The WLAN with SSID Bob24WiFi will cause adjacent channel interference.
正解：C、D
解説：
Explanation
The WLANs with SSIDs NETGEAR24 and Bob24WiFi will cause adjacent channel interference because they are using overlapping channels in the 2.4 GHz frequency band.
質問 # 49
Which two SLEs measure the amount of time that it takes for a process to complete? (Choose two.)
- A. time to connect
- B. throughput
- C. AP uptime
- D. roaming
正解：A、B
質問 # 50
What is meant when a Marvis Action is shown as "AI Validated"?
- A. Marvis has observed a new issue.
- B. Marvis has observed an issue that is no longer present.
- C. The issue which triggered an alert has been set to Resolved status.
- D. Marvis has observed a recurring issue.
正解：B
質問 # 51
Which Wireless Assurance SLE provides information on whether a user is able to associate to the WLAN?
- A. Roaming
- B. Throughput
- C. Successful Connect
- D. Capacity
正解：C
質問 # 52
Mist WLAN objects are configurable at which two levels? (Choose two.)
- A. organization
- B. site group
- C. site
- D. access point
正解：C、D
質問 # 53
You want to identify APs that are not associated with your network. However, the APs broadcast your corporate login page and WLAN name.
What does Mist use to identify APs in this scenario?
- A. an approved AP
- B. a honeypot AP
- C. a rogue AP
- D. a neighbor AP
正解：C
質問 # 54
What information would be streamed through webhooks? (Choose two.)
- A. audit logs
- B. SLE metrics of clients
- C. alerts
- D. location coordinates of RFID tags
正解：C、D
質問 # 55
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. The WLAN is configured with the high-density data rate setting enabled.
- B. The WLAN is configured to only broadcast on the 2.4 GHz spectrum.
- C. The WLAN is configured to use geofencing.
- D. The WLAN is configured to use DFS channels.
正解：B
質問 # 56
......
JN0-451 試験は、Juniper Mist AI テクノロジーに関するさまざまなトピックをカバーする選択式試験です。これらのトピックには、Juniper Mist AI アーキテクチャ、Mist AI テクノロジーの設定と展開、トラブルシューティング、監視、およびレポートが含まれます。この試験は、候補者がJuniper Mist AI テクノロジーを効果的に管理・運用する能力をテストするように設計されています。
JN0-451リアル無料試験問題と解答：https://jp.fast2test.com/JN0-451-premium-file.html
2023年最新の実際に出る検証済みの無料Juniper JN0-451試験問題：https://drive.google.com/open?id=1FP-Vz4Th14VhaWdrt6SCspDQclaz4GAb