初心者向けのH35-480_V3.0試験 [2023] 問題集でHuaweiのPDF問題 [Q14-Q38]

Share

初心者向けのH35-480_V3.0試験 [2023] 問題集でHuaweiのPDF問題

H35-480_V3.0プレミアム試験エンジンPDFをダウンロード


HCIA-5G-RAN V3.0 試験は、通信業界でキャリアアップを目指す個人にとって貴重な資格です。この認定は、ホワイトレーベルの5G RANテクノロジーとともに、5G RANネットワークの展開、設定、トラブルシューティングを行うために必要な知識とスキルを提供します。この認定は、世界中の組織に認められており、どの職業にも価値がある資格です。


Huawei H35-480_V3.0(HCIA-5G-RAN V3.0)認定試験は、電気通信業界でのキャリアの見通しを強化したい専門家にとって不可欠な認定です。この認定は、5G RANテクノロジーに関連する幅広いトピックをカバーしており、5Gテクノロジーを使用したい専門家に強固な基盤を提供します。この認定は世界的に認識されており、雇用主によって高く評価されており、通信業界でのキャリアを進歩させたい専門家にとって優れた投資となっています。

 

質問 # 14
What is the maximum number of PCIs supported by a 5G network?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:D

解説:
Explanation
https://www.5gworldpro.com/blog/2020/11/11/what-is-difference-between-pci-in-4g-lte-and-pci-in-5g-nr/


質問 # 15
What are the typical sizes of ping packets and intervals in single site verification? (Choose All that Apply)

  • A. 32 bytes, 1s
  • B. 1500 bytes, 2s
  • C. 1500 bytes, 1s
  • D. 32 bytes, 2s

正解:A、C

解説:
-"In single site verification, the typical ping packet size is 32 bytes and 1500 bytes, the typical interval is 1s." in Huawei official website.


質問 # 16
Which of the following NR slot configurations are defined in 3GPP specifications?

  • A. Uplink-only slot (all symbols are dedicated for uplink)
  • B. Mixed slot, which contains at least one downlink/uplink symbol while other symbols can be flexibly configured
  • C. Downlink-only slot (all symbols are dedicated for downlink)
  • D. Flexible-slot (all symbols are flexibly configured)

正解:C、D


質問 # 17
What are the typical sizes of ping packets and intervals in single site verification?

  • A. 1500 bytes,1s
  • B. 32 bytes,1s
  • C. 1500bytes, 2s
  • D. 32 bytes, 2s

正解:A


質問 # 18
Which of the following devices is used to implement service slicing on the 5G RAN side?

  • A. AAU
  • B. Antenna
  • C. RRU
  • D. BBU

正解:D

解説:
On the 5G RAN side, Service Slicing is implemented using a Base Band Unit (BBU). A BBU is a device that performs baseband processing functions, such as modulation, demodulation, and encoding/decoding of signals. It is also responsible for the connection to the core network and the management of the radio resources. In 5G, BBU is a key component to support service slicing, where different services can be assigned different slices of the network resources, such as bandwidth, power, and quality of service. This allows for more efficient use of resources and better management of different types of traffic, such as broadband and low latency services.


質問 # 19
Which of the following methods can be used to obtain VLAN IDs after a base station is powered on? (Choose All that Apply)

  • A. VLAN scanning
  • B. Configuration on LMT
  • C. VLAN detection
  • D. Remote DHCP assignment

正解:A、B、C

解説:
According to the Huawei SA Networking Product Design Guide (https://www.huawei.com/en/doc/e_huaweidoc/pdf/HW_051525), VLAN scanning is used to detect VLANs in a network. The VLAN scanning process is initiated on the base station and requires the base station to send a query to the Layer 2 switch. The query contains the VLAN ID, and the Layer 2 switch then responds with the list of interfaces that are associated with that VLAN ID. Configuration on the LMT is used to configure the VLAN and assign it to the base station. Finally, remote DHCP assignment is used to assign IP addresses to the base station from the DHCP server.


質問 # 20
What is the required distance between a CPE and a gNodeB in a 5G network test?

  • A. Greater than 10m
  • B. Greater than 5m
  • C. Less than 10m
  • D. Less than 5m

正解:A

解説:
"The distance between the CPE and the gNodeB should be greater than 10m to ensure that the test results are accurate and reliable."


質問 # 21
Which of the following factors trigger measurement in connected mode in SA networking? (Choose All that Apply)

  • A. Periodic TAU
  • B. Signal quality of the serving cell
  • C. Whether or not the UE is moving
  • D. Whether or not neighboring frequencies are configured

正解:B、C、D


質問 # 22
The RSRP value of the test terminal can be viewed on the GENEX Probe. Which of the following test results indicate good signal quality?

  • A. -30 to -60dBm
  • B. 0 to 60dBm
  • C. 30 to 60dBm
  • D. -60dBm to -90dBm

正解:D

解説:
"The RSRP value of the test terminal can be viewed on the GENEX Probe. A RSRP value of between -60dBm and -90dBm indicates good signal quality. Lower values indicate weaker signals, while higher values indicate stronger signals."


質問 # 23
Which of the following functions are implemented by the UBBP board in the BBU5900?

  • A. Processes uplink and downlink baseband signals.
  • B. Manages the configuration and devices for the base station.
  • C. Monitors performance and processes signals for the base station.
  • D. Provides CPRI ports for communication with RF modules.

正解:A、D


質問 # 24
Which of the following MML commands is used to bind a physical sector to an AAU on a gNodeB?

  • A. ADD NRCELL
  • B. ADD SECTOR
  • C. ADD NRLOCELL
  • D. ADD NRDUCELLCOVERAGE

正解:C

解説:
According to the Huawei SA Networking Product Design Guide (https://www.huawei.com/en/doc/e_huaweidoc/pdf/HW_051525), the MML command used to bind a physical sector to an AAU on a gNodeB is 'ADD NRLOCELL'.


質問 # 25
Which of the following NR channels or signals supports static and dynamic power control?

  • A. PDCCH
  • B. PBCH
  • C. SS
  • D. PUSCH

正解:A


質問 # 26
Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs? (Choose all that Apply)

  • A. TA
  • B. PCI
  • C. MACCE
  • D. RSRP

正解:B、D

解説:
1. RSRP (Reference Signal Received Power) is the power level of the reference signals received from the cell, it is used to measure the strength of the signal from the cell, and it is an important parameter for cell selection and handover decisions. C. PCI (Physical Cell Identity) is a unique identifier assigned to each cell in the network, it is used to identify the cell and its system information.


質問 # 27
Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs?

  • A. TA
  • B. PCI
  • C. MACCE
  • D. RSRP

正解:B、D


質問 # 28
Which downlink data split modes are supported on the gNodeB side in the 5G NSA Option 3x architecture?

  • A. SCG_AND_MCG: dynamic data split
  • B. SCG_AND_MCG: static data split
  • C. MCG_ONLY: only split to the MCG
  • D. SCG_ONLY: only split to the SCG

正解:C


質問 # 29
When you add tracking area information on a gNodeB, an operator ID is bound.

  • A. False
  • B. True

正解:B


質問 # 30
Which of the following can be used to check whether an antenna is reversely connected during NR single site verification?

  • A. Transmission test
  • B. DT around the site
  • C. Fixed-point CQT
  • D. VSWR test

正解:A


質問 # 31
What is the maximum MIMO mode supported by Huawei 5G indoor CPE?

  • A. 4T4R
  • B. 2T4R
  • C. 2T2R
  • D. 4T8R

正解:A

解説:
https://info.support.huawei.com/info-finder/encyclopedia/en/MIMO.html


質問 # 32
According to 5G eMBB service requirements, which of the following is the minimum rate required for network edge coverage?

  • A. 10Gbps
  • B. 1Gbps
  • C. 1Mbps
  • D. 100Mbps

正解:D


質問 # 33
Which of the following channels (signals) can be used for cell measurement in NR?

  • A. CSI-RS
  • B. SSB
  • C. DM-RS
  • D. PT-RS

正解:A、C

解説:
1. DM-RS (Demodulation Reference Signals) are transmitted in the frequency domain, they are used to demodulate the downlink data and control channels, and they can be used for cell measurement such as cell identification, cell reselection, and handover. B. CSI-RS (Channel State Information Reference Signals) are also transmitted in the frequency domain, they are used to provide channel state information for downlink data and control channels, and they can be used for cell measurement such as link adaptation, beamforming and interference management.
DM-RS stands for Demodulation Reference Signal and is used for channel estimation in the frequency domain. CSI-RS stands for Channel State Information Reference Signal and is used for channel estimation in the time-frequency domain. PT-RS and SSB are not channels (signals) that can be used for cell measurement in NR.


質問 # 34
At which layer is downlink data split implemented over the NR air interface in the NSA Option 3x architecture?

  • A. PDCP layer
  • B. RLC layer
  • C. Physical layer
  • D. MAC layer

正解:D

解説:
Downlink data split over the NR air interface in the NSA Option 3x architecture is implemented at the medium access control (MAC) layer. The MAC layer is responsible for the management of data transmission over the air interface, including segmentation and reassembly of data packets, scheduling of transmission resources, and error correction. The other layers (RLC, PDCP, and physical) are not involved in the implementation of downlink data split.
https://ec.europa.eu/research/participants/documents/downloadPublic?documentIds=080166e5a964aa85&appId=PPGMS Preliminary results for multi-service support in link solution adaptation
https://ec.europa.eu/research/participants/documents/downloadPublic?documentIds=080166e5a964aa85&appId=PPGMS
https://ieeexplore.ieee.org/iel7/6287639/8948470/08998153.pdf
3GPP NR Sidelink Transmissions Toward 5G V2X
https://ieeexplore.ieee.org/iel7/6287639/8948470/08998153.pdf
https://www.3gpp.org/ftp/Inbox/Marcoms/ICT_6_1-2.pdf
journal of ict standardization - 3gpp
https://www.3gpp.org/ftp/Inbox/Marcoms/ICT_6_1-2.pdf
In the Non-Stand-Alone (NSA) Option 3x architecture, the control plane functions are handled by the 4G LTE network (EPC), while the user plane functions are handled by the 5G NR network. Data split is a technique that allows to split the user plane data between the 4G LTE and 5G NR networks.
The MAC (Medium Access Control) layer is responsible for controlling the access to the shared wireless medium, and it is where the downlink data split is implemented. In this architecture, the MAC layer in the 5G NR network receives the downlink data from the 4G LTE network and sends it to the physical layer for transmission.


質問 # 35
5G wireless network cloudification can significantly improve the user rate.

  • A. False
  • B. True

正解:B


質問 # 36
Which of the following actions are involved in NAS procedure management in 5G? (Choose all that Apply)

  • A. RRC reestablishment
  • B. Session management
  • C. RRC connection setup
  • D. Registration management

正解:B、C、D

解説:
NAS (Non-Access Stratum) procedure management in 5G involves three specific actions: registration management, session management, and RRC connection setup. Registration management involves sending and receiving of NAS messages related to the establishment of user-network connections, such as attach and detach procedures. Session management involves sending and receiving of NAS messages related to the management of user session related information, such as security context management. RRC connection setup involves sending and receiving of NAS messages related to the establishment, modification, and release of RRC connections. RRC reestablishment is not involved in NAS procedure management in 5G.
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.02.01_60/ts_138331v150201p.pdf TS 138 331 - V15.2.1 - 5G; NR; Radio Resource Control (RRC ...
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.02.01_60/ts_138331v150201p.pdf
https://scdn.rohde-schwarz.com/ur/pws/dl_downloads/dl_application/application_notes/1sl/1SL368_0e_5G_NR_UE_RF_conformance_38.521-3.pdf
5g nr fr1 non-standalone ue rf conformance testing
https://scdn.rohde-schwarz.com/ur/pws/dl_downloads/dl_application/application_notes/1sl/1SL368_0e_5G_NR_UE_RF_conformance_38.521-3.pdf
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.03.00_60/ts_138331v150300p.pdf TS 138 331 - V15.3.0 - 5G; NR; Radio Resource Control (RRC ...
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.03.00_60/ts_138331v150300p.pdf


質問 # 37
During 5G single site verification, you only need to test the user access and rate. Other test items are analyzed in drive tests.

  • A. False
  • B. True

正解:A


質問 # 38
......


Huawei H35-480_V3.0(HCIA-5G-RAN V3.0)認定試験は、5G Radio Access Network(RAN)テクノロジーで知識とスキルを実証したい個人の専門的な認定試験です。この認定は、5G RANソリューションの計画、設計、展開、および維持を担当するネットワークエンジニア、ネットワークアーキテクト、およびテクニカルサポートスタッフ向けに設計されています。この試験では、5G RANアーキテクチャ、5G RANプロトコル、5G RAN計画と最適化、5G RANのトラブルシューティングなど、幅広いトピックをカバーしています。

 

あなたを合格させるHuawei試験にはH35-480_V3.0試験問題集:https://jp.fast2test.com/H35-480_V3.0-premium-file.html

検証済みH35-480_V3.0豪華お試しセットリアル試験問題集PDF:https://drive.google.com/open?id=1GgJmuhh8a-aRo21KZ2WaTYqAWLB7Kfqp


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어