リアルFortinet NSE5_FCT-7.0試験問題集には正解51問題と解答があります [Q23-Q47]

リアルFortinet NSE5_FCT-7.0試験問題集には正解51問題と解答があります

有効なNSE5_FCT-7.0テスト解答とFortinet NSE5_FCT-7.0試験PDF問題を試そう

質問 # 23
An administrator needs to connect FortiClient EMS as a fabric connector to FortiGate. What is the prerequisite to get FortiClient EMS to connect to FortiGate successfully?

A. Revoke and update the FortiClient EMS root CA.
B. Import and verify the FortiClient client certificate on FortiGate.
C. Revoke and update the FortiClient client certificate on EMS.
D. Import and verify the FortiClient EMS root CA certificate on FortiGate

正解：B

質問 # 24
Which security fabric component sends a notification to quarantine an endpoint after IOC detection in the automation process?

A. FortiAnalyzer
B. Forti Gate
C. ForbClient EMS
D. FortiClient

正解：D

質問 # 25
An administrator needs to connect FortiClient EMS as a fabric connector to FortiGate. What is the prerequisite to get FortiClient EMS to connect to FortiGate successfully?

A. Import and verify the FortiClient client certificate on FortiGate.
B. Revoke and update the FortiClient EMS root CA.
C. Revoke and update the FortiClient client certificate on EMS.
D. Import and verify the FortiClient EMS root CA certificate on FortiGate

正解：D

質問 # 26
Which two benefits are benefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)

A. Licenses are shared among sites.
B. The fabric connector must use an IP address to connect to FortiClient EMS
C. It provides granular access and segmentation.
D. Separate host servers manage each site.

正解：A、C

解説：
Explanation
Licenses are shared among sites: In multi-tenancy mode, licenses can be shared among the different tenant accounts or sites within FortiClient EMS. This means that a pool of licenses can be allocated and utilized across multiple sites or deployments as needed. It helps optimize license utilization and reduces the need for individual licenses for each site or customer.
It provides granular access and segmentation: Multi-tenancy mode allows for the creation of separate tenant accounts or groups within FortiClient EMS. Each tenant can have their own set of policies, configurations, and access rights, providing granular control and segmentation. This enables organizations to manage multiple sites or customer deployments separately within a single FortiClient EMS instance.

質問 # 27
An administrator has a requirement to add user authentication to the ZTNA access for remote or off-fabric users Which FortiGate feature is required m addition to ZTNA?

A. FortiGate explicit proxy
B. FortiGate certificates
C. FortiGate endpoint control
D. FortiGate FSSO

正解：A

質問 # 28
An administrator installs FortiClient EMS in the enterprise.
Which component is responsible for enforcing protection and checking security posture?

A. FortiClient EMS
B. FortiClient vulnerability scan
C. FortiClient EMS tags
D. FortiClient

正解：D

質問 # 29
Refer to the exhibits.

Which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-Users on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?

A. Change the endpoint control setting to enable tag visibility
B. Change the user identity settings to enable tag visibility
C. Change the FortiClient system settings to enable tag visibility
D. Update tagging rule logic to enable tag visibility

正解：A

質問 # 30
An administrator is required to maintain a software inventory on the endpoints. without showing the feature on the FortiClient dashboard What must the administrator do to achieve this requirement?

A. The administrator must use default endpoint profile
B. The administrator must not select the vulnerability scan feature in the deployment package.
C. The administrator must select the vulnerability scan feature in the deployment package, but disable the feature on the endpoint profile
D. The administrator must click the hide icon on the vulnerability scan tab

正解：D

質問 # 31
Refer to the exhibit.

Based on the FortiClient logs shown in the exhibit which endpoint profile policy is currently applied to the FortiClient endpoint from the EMS server?

A. Default
B. Compliance rules default
C. Fortinet- Training
D. Default configuration policy

正解：C

質問 # 32
What action does FortiClient anti-exploit detection take when it detects exploits?

A. Deletes the compromised application process
B. Blocks memory allocation to the compromised application process
C. Patches the compromised application process

正解：B

解説：
Explanation
The anti-exploit detection protects vulnerable endpoints from unknown exploit attacks. FortiClient monitors the behavior of popular applications, such as web browsers (Internet Explorer, Chrome, Firefox, Opera), Java/Flash plug-ins, Microsoft Office applications, and PDF readers, to detect exploits that use zero-day or unpatched vulnerabilities to infect the endpoint. Once detected, FortiClient terminates the compromised application process.

質問 # 33
When site categories are disabled in FortiClient webfilter and antivirus (malicious websites), which feature can be used to protect the endpoint from malicious web access?

A. Block malicious websites on antivirus
B. Web exclusion list
C. Real-time protection list
D. FortiSandbox URL list

正解：B

質問 # 34
Refer to the exhibits.

Which shows the configuration of endpoint policies.
Based on the configuration, what will happen when someone logs in with the user account student on an endpoint in the trainingAD domain?

A. FortiClient EMS will assign the Training policy for on-fabric endpoints and the Sales policy for the off-fabric endpoint
B. FortiClient EMS will assign the Training policy
C. FortiClient EMS will assign the Default policy
D. FortiClient EMS will assign the Sales policy

正解：B

質問 # 35
Refer to the exhibit.

Based on the settings shown in the exhibit, which two actions must the administrator take to make the endpoint compliant? (Choose two.)

A. Enable the webfilter profile
B. Patch applications that have vulnerability rated as high or above
C. Integrate FortiSandbox for infected file analysis
D. Run Calculator application on the endpoint

正解：B、D

質問 # 36
Refer to the exhibit.

Based on the logs shown in the exhibit, why did FortiClient EMS fail to install FortiClient on the endpoint?

A. The Windows installer service is not running
B. The task scheduler service is not running.
C. The remote registry service is not running
D. The FortiClient antivirus service is not running

正解：B

質問 # 37
Refer to the exhibits.

Which shows the configuration of endpoint policies.
Based on the configuration, what will happen when someone logs in with the user account student on an endpoint in the trainingAD domain?

A. FortiClient EMS will assign the Training policy for on-fabric endpoints and the Sales policy for the off-fabric endpoint
B. FortiClient EMS will assign the Default policy
C. FortiClient EMS will assign the Sales policy
D. FortiClient EMS will assign the Training policy

正解：B

質問 # 38
Refer to the exhibits.

Which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-Users on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?

A. Change the user identity settings to enable tag visibility
B. Change the FortiClient system settings to enable tag visibility
C. Update tagging rule logic to enable tag visibility
D. Change the endpoint control setting to enable tag visibility

正解：B

質問 # 39
Which two benefits are benefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)

A. Separate host servers manage each site.
B. The fabric connector must use an IP address to connect to FortiClient EMS
C. Licenses are shared among sites.
D. It provides granular access and segmentation.

正解：A、D

質問 # 40
An administrator is required to maintain a software vulnerability on the endpoints, without showing the feature on the FortiClient dashboard. What must the administrator do to achieve this requirement?

A. Disable select the vulnerability scan feature in the deployment package
B. Click the hide icon on the vulnerability scan tab
C. Select the vulnerability scan feature in the deployment package, but disable the feature on the endpoint profile
D. Use the default endpoint profile

正解：B

質問 # 41
Refer to the exhibit.

Based on the logs shown in the exhibit, why did FortiClient EMS fail to install FortiClient on the endpoint?

A. The Windows installer service is not running
B. The task scheduler service is not running.
C. The remote registry service is not running
D. The FortiClient antivirus service is not running

正解：B

質問 # 42
Refer to the exhibit.

Which shows multiple endpoint policies on FortiClient EMS.
Which policy is applied to the endpoint in the AD group trainingAD?

A. Both the Sales and Training policies because their priority is higher than the Default policy
B. The Default policy because it has the highest priority
C. The Training policy
D. The Sales policy

正解：C

解説：
Explanation
Training policy because:
- Policy is enabled
- Priority is better than Default Policy

質問 # 43
Refer to the exhibit.

Based on the settings shown in the exhibit, which action will FortiClient take when users try to accesswww.facebook.com?

A. FortiClient will prompt a warning message to warn the user before they can access the Facebook website
B. FortiClient will monitor only the user's web access to the Facebook website
C. FortiClient will block access to Facebook and its subdomains.

正解：B

質問 # 44
Which security fabric component sends a notification to quarantine an endpoint after IOC detection in the automation process?

A. FortiAnalyzer
B. ForbClient EMS
C. Forti Gate
D. FortiClient

正解：C

質問 # 45
Which statement about FortiClient comprehensive endpoint protection is true?

A. It helps to safeguard systems from email spam
B. It helps to safeguard systems from data loss.
C. It helps to safeguard systems from DDoS.
D. lt helps to safeguard systems from advanced security threats, such as malware.

正解：D

解説：
FortiClient provides comprehensive endpoint protection for your Windows-based, Mac-based, and Linuxbased desktops, laptops, file servers, and mobile devices such as iOS and Android. It helps you to safeguard your systems with advanced security technologies, all of which you can manage from a single management console.

質問 # 46
Refer to the exhibit.

Based on the FortiClient logs shown in the exhibit which endpoint profile policy is currently applied to the FortiClient endpoint from the EMS server?