ベストな準備プラン156-585試験2022年最新のCCTE無制限116問題
注目すべき時短になる156-585オールインワン試験ガイド
CheckPoint 156-585 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
質問 62
Which of the following inputs is suitable for debugging HTTPS inspection issues?
- A. fw diag debug tls enable
- B. vpn debug cptls on
- C. fw debug tls on TDERROR_ALL_ALL=5
- D. fw ctl debug -m fw + conn drop cptls
正解: D
質問 63
The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections of CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage.
What is the possible reason of such behavior?
- A. The kernel parameter ids_tolerance_stress is set to 10
- B. The kernel parameter ids_assume_stress is set to 1
- C. The kernel parameter ids_tolerance_no_stress is set to 10
- D. The kernel parameter ids_assume_stress is set to 0
正解: A
質問 64
How many captures does the command "fw monitor -p all" take?
- A. All 15 of the inbound and outbound modules
- B. 1 from every inbound and outbound module of the chain
- C. The -p option takes the same number of captures, but gathers all of the data packet
- D. All 4 points of the fw VM modules
正解: B
質問 65
Which is the correct "fw monitor" syntax for creating a capture file for loading it into WireShark?
- A. fw monitor -e "accept<FILTER EXPRESSION>;" -file Output.cap
- B. This cannot be accomplished as it is not supported with R80.10
- C. fw monitor -e "accept<FILTER EXPRESSION>;" >> Output.cap
- D. fw monitor -e "accept<FILTER EXPRESSION>;" -o Output.cap
正解: D
質問 66
What is the correct syntax to turn a VPN debug on and create new empty debug files?
- A. vpndebug trunc on
- B. vpn debug truncon
- C. vpn debug trunkon
- D. vpn kdebug on
正解: C
質問 67
Check Point Threat Prevention policies can contain multiple policy layers and each layer consists of its own Rule Base Which Threat Prevention daemon is used for Anti-virus?
- A. in.msd
- B. ctasd
- C. in emaild
- D. in.emaild.mta
正解: C
質問 68
If you run the command "fw monitor -e accept src=10.1.1.201 or src=172.21.101.10 or src=192.0.2.10;" from the cli sh What will be captured?
- A. Packets destined to 172 21 101 10 from 10.1.1.101
- B. fw monitor only works in expert mode so no packets will be captured
- C. Only packet going to 192.0.2.10
- D. Packets from 10 1 1 201 going to 192.0 2.10
正解: C
質問 69
For TCP connections, when a packet arrives at the Firewall Kemel out of sequence or fragmented, which layer of IPS corrects this lo allow for proper inspection?
- A. Context Management
- B. Protocol Parsers
- C. Protections
- D. Passive Streaming Library
正解: A
質問 70
Check Point Access Control Daemons contains several daemons for Software Blades and features Which Daemon is usedfor Application & Control URL Filtering?
- A. pepd
- B. rad
- C. cprad
- D. pdpd
正解: A
質問 71
How many tiers of pattern matching can a packet pass through during IPS inspection?
- A. 0
- B. 1
- C. 2
- D. 3
正解: C
質問 72
When a User process or program suddenly crashes, a core dump is often used to examine the problem. Which command is used to enable the core-dumping via GAIA dish?
- A. set core-dump per_process
- B. set core-dump enable
- C. set core-dump total
- D. set user-dump enable
正解: B
質問 73
James is using the same filter expression in fw monitor for CITRIX very often and instead of typing this all the time he wants to add it as a macro to the fw monitor definition file. What's the name and location of this file?
- A. $FWDIR/lib/tcpip.def
- B. $FWDIR/lib/fw.monitor
- C. $FWDIR/lib/fwmonltor.def
- D. $FWDIR/conf/fwmonltor.def
正解: C
質問 74
What components make up the Context Management Infrastructure?
- A. CPM and SOLR
- B. CMI Loader and Pattern Matcher
- C. CPX and FWM
- D. CPMI and FW Loader
正解: B
質問 75
During firewall kernel debug with fw ctl zdebug you received less information than expected. You noticed that a lot of messages were lost since the time the debug was started. What should you do to resolve this issue?
- A. Increase debug buffer; Use fw ctl debug -buf 32768
- B. Redirect debug output to file; Use fw ctl debug -o ./debug.elg
- C. Redirect debug output to file; Use fw ctl zdebug -o ./debug.elg
- D. Increase debug buffer; Use fw ctl zdebug -buf 32768
正解: A
質問 76
The Check Pom! Firewall Kernel is the core component of the Gaia operating system and an integral part of the traffic inspection process There are two procedures available for debugging the firewall kernel Which procedure/command is used for troubleshooting packet drops and other kernel activites while using minimal resources (1 MB buffer)?
- A. fw debug ctl
- B. fwk ctl debug
- C. fw ctl zdebug
- D. fw ctl debug/kdebug
正解: C
質問 77
Which of the following daemons is used for Threat Extraction?
- A. tex
- B. tedex
- C. scrubd
- D. extractd
正解: D
質問 78
Check Point Access Control Daemons contains several daemons for Software Blades and features. Which Daemon is used for Application & Control Filtering?
- A. pepd
- B. cprad
- C. rad
- D. pdpd
正解: C
質問 79
In Security Management High Availability, if the primary and secondary managements, running the same version of R80.x, are in a state of 'Collision', how can this be resolved?
- A. Run the command 'fw send synch force' on the primary server and 'fw get sync quiet' on the secondary server
- B. Administrator should manually synchronize the servers using SmartConsole
- C. The Collision state does not happen in R80.x as the synchronizing automatically on every publish action
- D. Reset the SIC of the secondary management server
正解: B
質問 80
Some users from your organization have been reporting some connection problems with CIFS since this morning You suspect an IPS issue after an automatic IPS update last night. So you want to perform a packet capture on uppercase I only directly after the IPS chain module (position 4 in the chain) to check If the packets pass the IPS. What command do you need to run?
- A. fw monitor -ml -pi 5 -e <filterexperession>
- B. tcpdump -eni any <filterexpression>
- C. fw monitor -pi 5 -e <filterexptession>
- D. fw monitor -pi asm <filtefexpfession>
正解: B
質問 81
Joey is configuring a site-to-site VPN with his business partner. On Joey's site he has a Check Point R80.10 Gateway and his partner uses Cisco ASA 5540 as a gateway.
Joey's VPN domain on the Check Point Gateway object is manually configured with a group object that contains two network objects:
VPN_Domain3 = 192.168.14.0/24
VPN_Domain4 = 192.168.15.0/24
Partner's site ACL as viewed from "show run"
access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.14.0 255.255.255.0 access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.15.0 255.255.255.0 When they try to establish VPN tunnel, it fails. What is the most likely cause of the failure given the information provided?
- A. Tunnel fails on Joey's site, because he misconfigured IP address of VPN peer.
- B. Tunnel fails on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/23, but the peer expects the two distinct networks 192.168.14.0/24 and 192.168.15.0/24.
- C. Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation due to the algorithm mismatch.
- D. Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/24 and 192.168.15.0/24, but the peer expects the one network 192.168.14.0/23
正解: B
質問 82
You need to run a kernel debug over a longer period of time as the problem occurs only once or twice a week. Therefore, you need to add a timestamp to the kernel debug and write the output to a file but you can't afford to fill up all the remaining disk space and you only have 10 GB free for saving the debugs. What is the correct syntax for this?
- A. fw ctl debug -T -f -m 10 -s 1000000 -o debugfilename
- B. fw ctl kdebug -T -f -m 10 -s 1000000 -o debugfilename
- C. fw ctl kdebug -T -f -m 10 -s 1000000 > debugfilename
- D. fw ctl kdebug -T -m 10 -s 1000000 -o debugfilename
正解: A
質問 83
Which one of the following is NOT considered a Solr core partition:
- A. CPM_Gtobal_R
- B. CPM_Global_A
- C. CPM_0_Revisions
- D. CPM_0_Disabled
正解: A
質問 84
What is the correct syntax to set all debug flags for Unified Policy related issues?
- A. fw ctl debug -m fw all
- B. fw ctl debug -m UP all
- C. fw ctl kdebug -m UP all
- D. fw ctl debug -m up all
正解: B
質問 85
What is the purpose of the Hardware Diagnostics Tool?
- A. Verifying that Security Gateway hardware is functioning correctly
- B. Verifying that Check Point Appliance hardware is actually broken
- C. Verifying the Security Management Server hardware is functioning correctly
- D. Verifying that Check Point Appliance hardware is functioning correctly
正解: C
質問 86
......
合格保証付き156-585問題集：https://jp.fast2test.com/156-585-premium-file.html
あなたを合格さすCheckPoint 156-585試験専門はここにある：https://drive.google.com/open?id=1fM4JSYR5cCzRjKGm4pwWtBawDkDjINT1