お手軽にダウンロードできるNSE5_FMG-7.0試験問題集が更新されたのは74問があります
最新更新されたのはNSE5_FMG-7.0試験問題2023年更新
Fortinet NSE5_FMG-7.0認定は、ネットワーキングの専門家がFortinetのFortimanager 7.0の管理と構成に関する専門知識を実証する優れた方法です。この認定を獲得することで、個人がエンタープライズ環境でFortinet Security Solutionsの展開と管理のスキルと知識を紹介することにより、個人がキャリアを進めるのに役立ちます。
質問 # 16
Refer to the exhibit.
According to the error message why is FortiManager failing to add the FortiAnalyzer device?
- A. The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager
- B. The administrator must use the Add Model Device section and discover the FortiAnaJyzer device
- C. The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface
- D. The administrator must use the correct user name and password of the FortiAnalyzer device
正解：B
質問 # 17
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?
- A. When a new policy package is created, the administrator must assign the global policy package from the global ADOM.
- B. When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.
- C. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.
- D. When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package
正解：C
質問 # 18
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to download IPS packages
- B. Allows FortiManager to run real-time debugs on the managed devices
- C. Allows FortiManager to automatically configure a default route
- D. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
正解：D
質問 # 19
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. 192.168.0.1/24
- B. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.
- C. 10.200.1.0/24
- D. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
正解：C
解説：
FortiManager_6.4_Study_Guide-Online - page 209
In the example, the dynamic address object LocalLan refers to the internal network address of the managed firewalls. The object has a default value of 192.168.1.0/24. The mapping rules are defined per device. For Remote-FortiGate, the address object LocalLan referes to 10.10.11.0/24. The devices in the ADOM that do not have dynamic mapping for LocalLan have a default value of 192.168.1.0/2.
質問 # 20
View the following exhibit.
Which of the following statements are true based on this configuration setting? (Choose two.)
- A. This setting will allow automatic updates to the policy package configuration for a managed device.
- B. This setting will enable the ADOMs feature on FortiManager.
- C. This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.
- D. This setting is applied globally to all ADOMs.
正解：C、D
質問 # 21
Refer to the exhibit.
Which two statements about the output are true? (Choose two.)
- A. Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed
- B. The latest history for the managed FortiGate does not match with the device-level database
- C. The latest revision history for the managed FortiGate does match with the FortiGate running configuration
- D. Configuration changes directly made on the FortiGate have been automatically updated to device-level
正解：B、C
解説：
database
Explanation:
STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up - dev-db: modified - This is the device setting status which indicates that configuration changes were made on FortiManager. - conf: in sync - This is the sync status which shows that the latest revision history is in sync with Fortigate's configuration. - cond: pending - This is the configuration status which says that configuration changes need to be installed.
Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now there is a new modification on FortiManager device level DB (dev-db: modified) which wasn't installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn't match device DB.
Conclusion: - Revision DB does match FortiGate. - No changes were installed to FortiGate yet. - Device DB doesn't match Revision DB. - No changes were done on FortiGate (auto-update) but configuration was retrieved instead After an Auto-Update or Retrieve: device database = latest revision = FGT Then after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).
After reverting to a previous revision in revision history: device database = reverted revision != FGT
質問 # 22
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)
- A. When FortiManager is auto-updated with configuration changes made directly on a managed device
- B. When configuration revision is reverted to previous revision in the revision history
- C. When changes to device-level database is made on FortiManager
- D. When FortiManager installs device-level changes to a managed device
正解：A、D
質問 # 23
Refer to the exhibit.
An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?
- A. It allows FortiGate to reboot and recover the previous configuration from its configuration file.
- B. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.
- C. It allows FortiGate to reboot and restore a previously working firmware image.
- D. It allows FortiGate to unset central management settings.
正解：A
質問 # 24
View the following exhibit.
If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)
- A. FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.
- B. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.
- C. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.
- D. If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.
正解：B、C
解説：
Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.
質問 # 25
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to download IPS packages
- B. Allows FortiManager to run real-time debugs on the managed devices
- C. Allows FortiManager to automatically configure a default route
- D. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
正解：D
解説：
FortiManager 6.2 Study guide page 350
質問 # 26
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?
- A. When a new policy package is created, you need to reapply the global policy package to the ADOM.
- B. When a new policy package is created, it automatically assigns the global policies to the new package.
- C. When a new policy package is created, you need to assign the global policy package from the global ADOM.
- D. When a new policy package is created, you can select the option to assign the global policies to the new package.
正解：B
解説：
Global Policy Package is applied at the ADOM level and you have the option to choose which ADOM policy packages you want to exclude (there is no option to choose Policy Packages to include).
質問 # 27
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?
- A. FortiManager will not allow the administrator to delete a referenced address object
- B. FortiManager will replace the deleted address object with the none address object in the referenced
firewall policy - C. FortiManager will disable the status of the referenced firewall policy
- D. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
正解：B
質問 # 28
An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)
- A. Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces
- B. Specify a gateway address when you create a default SD-WAN static route
- C. Enable SD-WAN central management in the Training ADOM
- D. Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings
正解：A、C
質問 # 29
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?
- A. Trainer does not have full rights over this ADOM
- B. Trainer must close Student's workflow session before approving the request
- C. Trainer is not a part of workflow approval group
- D. Student, who submitted the workflow session, must first self-approve the request
正解：C
質問 # 30
An administrator is replacing a device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
What device name and serial number must the administrator use?
- A. Device name of the replacement device and serial number of the original device.
- B. Device name and serial number of the original device.
- C. Device name of the original device and serial number of the replacement device.
- D. Device name and serial number of the replacement device.
正解：C
質問 # 31
View the following exhibit.
Which statement is true regarding this failed installation log?
- A. Policy ID 2 is installed without a source device
- B. Policy ID 2 is installed in disabled state
- C. Policy ID 2 will not be installed
- D. Policy ID 2 is installed without a source address
正解：A
質問 # 32
What does a policy package status of Conflict indicate?
- A. The policy package configuration has been changed on both FortiManager and the managed device independently.
- B. The policy configuration has never been imported after a device was registered on FortiManager.
- C. The policy package does not have a FortiGate as the installation target.
- D. The policy package reports inconsistencies and conflicts during a Policy Consistency Check.
正解：A
質問 # 33
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Managed gateways are devices managed by FortiManager in the same ADOM
- B. Managed devices in other ADOMs must be treated as external gateways
- C. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec
VPN - D. External gateways are third-party VPN gateway devices only
正解：A、B
質問 # 34
Which three settings are the factory default settings on FortiManager? (Choose three.)
- A. Reports and Event Monitor panes are enabled
- B. FortiAnalyzer features are disabled
- C. Username is admin
- D. port1 interface IP address is 192.168.1.99/24
- E. Password is fortinet
正解：B、C、D
質問 # 35
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?
- A. When a new policy package is created, you need to reapply the global policy package to the ADOM.
- B. When a new policy package is created, it automatically assigns the global policies to the new package.
- C. When a new policy package is created, you need to assign the global policy package from the global
ADOM. - D. When a new policy package is created, you can select the option to assign the global policies to the new package.
正解：B
解説：
Global Policy Package is applied at the ADOM level and you have the option to choose which ADOM policy packages you want to exclude (there is no option to choose Policy Packages to include).
質問 # 36
View the following exhibit.
What is the purpose of setting ADOM Mode to Advanced?
- A. The setting allows automatic updates to the policy package configuration for a managed device
- B. The setting enables the ADOMs feature on FortiManager
- C. The setting disables concurrent ADOM access and adds ADOM locking
- D. This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.
正解：D
質問 # 37
You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?
- A. Any pending device settings will be installed automatically
- B. The shared policy package will not be moved to the new ADOM
- C. Any unused objects from a previous ADOM are moved to the new ADOM automatically
- D. Policy packages will be imported into the new ADOM automaticallyD
正解：B
質問 # 38
......
無料更新されたFortinet NSE5_FMG-7.0テストエンジン問題には74問題と解答：https://jp.fast2test.com/NSE5_FMG-7.0-premium-file.html
ベストな問題集を使おうNSE 5 Network Security Analyst NSE5_FMG-7.0専門試験問題：https://drive.google.com/open?id=1SgUT29rkXWgQn-YfAWaYqOv93sE1t6bU